devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 1/3] dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor
       [not found] <20210822184927.94673-1-jacopo@jmondi.org>
@ 2021-08-22 18:49 ` Jacopo Mondi
  2021-08-24 12:28   ` Rob Herring
  0 siblings, 1 reply; 2+ messages in thread
From: Jacopo Mondi @ 2021-08-22 18:49 UTC (permalink / raw)
  To: Jonathan Cameron, Lars-Peter Clausen, Andy Shevchenko,
	Matt Ranostay, Magnus Damm, Rob Herring
  Cc: Jacopo Mondi, linux-iio, devicetree

Add documentation for the Senseair Sunrise 006-0-0007 CO2 NDIR sensor.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
---
v2->v3:
- Fix syntax error reported by dt_binding_check
  The device node label in the example cannot contain '-'
- Add 'Typically' to the gpios polarities description

v1->v2:
- Add maxItems to -gpios properties as suggested by Rob
- Add a label to the device node in the example as suggested by Rob
---
 .../iio/chemical/senseair,sunrise.yaml        | 55 +++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 2 files changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml

diff --git a/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
new file mode 100644
index 000000000000..d05d06b5840e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/senseair,sunrise.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Senseair Sunrise 006-0-0007 CO2 Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  Senseair Sunrise 006-0-0007 is a NDIR CO2 sensor. It supports I2C or UART buses
+  for communications and control.
+
+  Datasheets:
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSP11704.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSH11649.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Market/publicerat/TDE7318.pdf
+
+properties:
+  compatible:
+    const: senseair,sunrise-006-0-0007
+
+  reg:
+    maxItems: 1
+
+  ndry-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the nDRY pin. Typically active low.
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the EN pin. Typically active high.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sunrise: co2-sensor@68 {
+        compatible = "senseair,sunrise-006-0-0007";
+        reg = <0x68>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 944a14926e02..c60502eb3d36 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1000,6 +1000,8 @@ patternProperties:
     description: Shenzhen SEI Robotics Co., Ltd
   "^semtech,.*":
     description: Semtech Corporation
+  "^senseair,.*":
+    description: Senseair AB
   "^sensirion,.*":
     description: Sensirion AG
   "^sensortek,.*":
--
2.32.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH v3 1/3] dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor
  2021-08-22 18:49 ` [PATCH v3 1/3] dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor Jacopo Mondi
@ 2021-08-24 12:28   ` Rob Herring
  0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2021-08-24 12:28 UTC (permalink / raw)
  To: Jacopo Mondi
  Cc: Rob Herring, Matt Ranostay, devicetree, Magnus Damm,
	Jonathan Cameron, linux-iio, Lars-Peter Clausen, Andy Shevchenko

On Sun, 22 Aug 2021 20:49:25 +0200, Jacopo Mondi wrote:
> Add documentation for the Senseair Sunrise 006-0-0007 CO2 NDIR sensor.
> 
> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
> v2->v3:
> - Fix syntax error reported by dt_binding_check
>   The device node label in the example cannot contain '-'
> - Add 'Typically' to the gpios polarities description
> 
> v1->v2:
> - Add maxItems to -gpios properties as suggested by Rob
> - Add a label to the device node in the example as suggested by Rob
> ---
>  .../iio/chemical/senseair,sunrise.yaml        | 55 +++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
>  2 files changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-08-24 12:28 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20210822184927.94673-1-jacopo@jmondi.org>
2021-08-22 18:49 ` [PATCH v3 1/3] dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor Jacopo Mondi
2021-08-24 12:28   ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).