From: Abel Vesa <abel.vesa@nxp.com>
To: Jacky Bai <ping.bai@nxp.com>
Cc: shawnguo@kernel.org, robh+dt@kernel.org, sboyd@kernel.org,
s.hauer@pengutronix.de, p.zabel@pengutronix.de,
kernel@pengutronix.de, linux-imx@nxp.com,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 0/9] Add imx8ulp clock & reset driver support
Date: Thu, 16 Sep 2021 09:46:21 +0300 [thread overview]
Message-ID: <YULoPX6FI7So8ntf@ryzen> (raw)
In-Reply-To: <20210914065208.3582128-1-ping.bai@nxp.com>
On 21-09-14 14:51:59, Jacky Bai wrote:
> This patchset adds the clock & reset driver support for i.MX8ULP.
> For some of the PCC slot, As there is a SWRST control bit share
> the same pcc register for peripheral reset ccontrol. To simplify
> the case, register the pcc reset controller driver when pcc
> clock driver is registered.
>
> Patch 1/9 for the dt-bindings part is send out for review previously
> with the dts patchset:
> https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210607083921.2668568-1-ping.bai@nxp.com/
>
> Shawn suggests to send out the clock driver part firstly, so this
> patch is included in this patchset for now.
>
Applied all.
Thanks.
> v3 changes:
> - split the clock dt schema file into two file, one for pcc, one for cgc
>
> v2 changes:
> - remove the useless clocks & clock-names from the dt-binding doc
> - remove the redundant fixed clock register.
>
> Anson Huang (1):
> clk: imx: disable i.mx7ulp composite clock during initialization
>
> Jacky Bai (8):
> dt-bindings: clock: Add imx8ulp clock support
> clk: imx: Update the pllv4 to support imx8ulp
> clk: imx: Update the compsite driver to support imx8ulp
> clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
> clk: imx: disable the pfd when set pfdv2 clock rate
> clk: imx: Update the pfdv2 for 8ulp specific support
> clk: imx: Add clock driver for imx8ulp
> clk: imx: Add the pcc reset controller support on imx8ulp
>
> .../bindings/clock/imx8ulp-cgc-clock.yaml | 43 ++
> .../bindings/clock/imx8ulp-pcc-clock.yaml | 50 ++
> drivers/clk/imx/Kconfig | 6 +
> drivers/clk/imx/Makefile | 2 +
> drivers/clk/imx/clk-composite-7ulp.c | 87 ++-
> drivers/clk/imx/clk-imx7ulp.c | 20 +-
> drivers/clk/imx/clk-imx8ulp.c | 569 ++++++++++++++++++
> drivers/clk/imx/clk-pfdv2.c | 22 +-
> drivers/clk/imx/clk-pllv4.c | 34 +-
> drivers/clk/imx/clk.h | 24 +-
> include/dt-bindings/clock/imx8ulp-clock.h | 258 ++++++++
> include/dt-bindings/reset/imx8ulp-pcc-reset.h | 59 ++
> 12 files changed, 1142 insertions(+), 32 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
> create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
> create mode 100644 drivers/clk/imx/clk-imx8ulp.c
> create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h
> create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
>
> --
> 2.26.2
>
prev parent reply other threads:[~2021-09-16 6:46 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-14 6:51 [PATCH v3 0/9] Add imx8ulp clock & reset driver support Jacky Bai
2021-09-14 6:52 ` [PATCH v3 1/9] dt-bindings: clock: Add imx8ulp clock support Jacky Bai
2021-09-14 11:25 ` Abel Vesa
2021-09-14 13:11 ` Jacky Bai
2021-09-14 15:30 ` Abel Vesa
2021-09-20 21:44 ` Rob Herring
2021-09-14 6:52 ` [PATCH v3 2/9] clk: imx: Update the pllv4 to support imx8ulp Jacky Bai
2021-09-14 11:29 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 3/9] clk: imx: Update the compsite driver " Jacky Bai
2021-09-14 11:30 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 4/9] clk: imx: disable i.mx7ulp composite clock during initialization Jacky Bai
2021-09-14 11:32 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 5/9] clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp Jacky Bai
2021-09-14 11:33 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 6/9] clk: imx: disable the pfd when set pfdv2 clock rate Jacky Bai
2021-09-14 11:34 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 7/9] clk: imx: Update the pfdv2 for 8ulp specific support Jacky Bai
2021-09-14 11:35 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 8/9] clk: imx: Add clock driver for imx8ulp Jacky Bai
2021-09-14 11:55 ` Abel Vesa
2021-09-14 6:52 ` [PATCH v3 9/9] clk: imx: Add the pcc reset controller support on imx8ulp Jacky Bai
2021-09-14 12:09 ` Abel Vesa
2021-09-14 13:07 ` Jacky Bai
2021-09-14 15:19 ` Abel Vesa
2021-09-14 11:17 ` [PATCH v3 0/9] Add imx8ulp clock & reset driver support Abel Vesa
2021-09-16 6:46 ` Abel Vesa [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YULoPX6FI7So8ntf@ryzen \
--to=abel.vesa@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=p.zabel@pengutronix.de \
--cc=ping.bai@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).