From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Dikshita Agarwal <dikshita@codeaurora.org>
Cc: andy.gross@linaro.org, david.brown@linaro.org,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, vgarodia@codeaurora.org,
stanimir.varbanov@linaro.org,
Mansur Alisha Shaik <mansur@codeaurora.org>
Subject: Re: [RESEND PATCH v6] arm64: dts: qcom: sc7280: Add venus DT node
Date: Tue, 21 Sep 2021 17:15:05 -0500 [thread overview]
Message-ID: <YUpZaQ42ldzEKtV/@builder.lan> (raw)
In-Reply-To: <1632199829-25686-1-git-send-email-dikshita@codeaurora.org>
On Mon 20 Sep 23:50 CDT 2021, Dikshita Agarwal wrote:
> Add DT entries for the sc7280 venus encoder/decoder.
>
> this patch depends on [1].
>
> [1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=529463
The stuff you write here will be forever imprinted in the git history
and it's already unnecessary, given that the patch you reference here is
available in linux-next.
Things you want to mention, but shouldn't go into the git history, put
those below the '---' line.
>
> Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
> Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 75 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index a8c274a..f171ababc 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -63,6 +63,11 @@
> no-map;
> reg = <0x0 0x80b00000 0x0 0x100000>;
> };
> +
> + video_mem: memory@8b200000 {
> + reg = <0x0 0x8b200000 0x0 0x500000>;
> + no-map;
> + };
> };
>
> cpus {
> @@ -1063,6 +1068,76 @@
> qcom,bcm-voters = <&apps_bcm_voter>;
> };
>
> + venus: video-codec@aa00000 {
> + compatible = "qcom,sc7280-venus";
I do however now see this compatible defined in a binding in linux-next,
so you definitely should have listed that patch as a dependency - and
preferably held off sending me 6 versions (plus resend) of a patch that
I can't merge.
Please ping me once the binding is merged, so that I know when I can
merge this patch.
Thanks,
Bjorn
> + reg = <0 0x0aa00000 0 0xd0600>;
> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
> + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
> + <&videocc VIDEO_CC_VENUS_AHB_CLK>,
> + <&videocc VIDEO_CC_MVS0_CORE_CLK>,
> + <&videocc VIDEO_CC_MVS0_AXI_CLK>;
> + clock-names = "core", "bus", "iface",
> + "vcodec_core", "vcodec_bus";
> +
> + power-domains = <&videocc MVSC_GDSC>,
> + <&videocc MVS0_GDSC>,
> + <&rpmhpd SC7280_CX>;
> + power-domain-names = "venus", "vcodec0", "cx";
> + operating-points-v2 = <&venus_opp_table>;
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
> + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
> + interconnect-names = "cpu-cfg", "video-mem";
> +
> + iommus = <&apps_smmu 0x2180 0x20>,
> + <&apps_smmu 0x2184 0x20>;
> + memory-region = <&video_mem>;
> +
> + video-decoder {
> + compatible = "venus-decoder";
> + };
> +
> + video-encoder {
> + compatible = "venus-encoder";
> + };
> +
> + video-firmware {
> + iommus = <&apps_smmu 0x21a2 0x0>;
> + };
> +
> + venus_opp_table: venus-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-133330000 {
> + opp-hz = /bits/ 64 <133330000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-240000000 {
> + opp-hz = /bits/ 64 <240000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-335000000 {
> + opp-hz = /bits/ 64 <335000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-424000000 {
> + opp-hz = /bits/ 64 <424000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> +
> + opp-460000048 {
> + opp-hz = /bits/ 64 <460000048>;
> + required-opps = <&rpmhpd_opp_turbo>;
> + };
> + };
> +
> + };
> +
> videocc: clock-controller@aaf0000 {
> compatible = "qcom,sc7280-videocc";
> reg = <0 0xaaf0000 0 0x10000>;
> --
> 2.7.4
>
next prev parent reply other threads:[~2021-09-21 22:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-21 4:50 [RESEND PATCH v6] arm64: dts: qcom: sc7280: Add venus DT node Dikshita Agarwal
2021-09-21 22:15 ` Bjorn Andersson [this message]
2021-10-22 8:31 ` Stanimir Varbanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YUpZaQ42ldzEKtV/@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dikshita@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mansur@codeaurora.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=stanimir.varbanov@linaro.org \
--cc=vgarodia@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).