Re: lets settle the LED `function` property regarding the netdev trigger

[Andrew Lunn <andrew@lunn.ch>]

> Hello Andrew,
> 
> I am aware of this, and in fact am working on a proposal for an
> extension of netdev LED extension, to support the different link
> modes. (And also to support for multi-color LEDs.)
> 
> But I am not entirely sure whether these different link modes should be
> also definable via device-tree. Are there devices with ethernet LEDs
> dedicated for a specific speed? (i.e. the manufacturer says in the
> documentation of the device, or perhaps on the device's case, that this
> LED shows 100M/1000M link, and that other LED is shows 10M link?)
> If so, that this should be specified in the devicetree, IMO. But are
> such devices common?

I have a dumb 5 port switch next to me. One port is running at 1G. Its
left green LED is on and blinks with traffic. Another port of the
switch is running at 100Mbps and its right orange LED is on, blinks
for traffic. And there is text on the case saying 10/100 orange, 1G
green.

I think this is pretty common. You generally do want to know if 10/100
is being used, it can indicate problems. Same for a 10G port running
at 1G, etc.

> And what about multi-color LEDs? There are ethernet ports where one LED
> is red-green, and so can generate red, green, and yellow color. Should
> device tree also define which color indicates which mode?

There are two different ways this can be implemented. There can be two
independent LEDs within the same package. So you can generate three
colours. Or there can be two cross connected LEDs within the
package. Apply +ve you get one colour, apply -ve you get a different
colour. Since you cannot apply both -ve and +ve at the same time, you
cannot get both colours at once.

If you have two independent LEDs, I would define two LEDs in DT.

Things get tricky for the two dependency LEDs. Does the LED core have
support for such LEDs?

This is where we need to strike a balance between too simple and too
complex. Implement most of the common features, but don't support
exotic stuff, like two dependency LEDs?

       Andrew