Re: [PATCH v5] arm64: dts: qcom: sc7280: Add WPSS remoteproc node

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Mon 04 Oct 02:32 PDT 2021, Rakesh Pillai wrote:

> Add the WPSS remoteproc node in dts for
> PIL loading.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>

qcom,sc7280-wpss-pil isn't a compatible that's documented or implemented
upstream, so I can't do anything with this patch.

I did go back an looked for the binding and driver and made a comment
regarding auto_boot. My comment/question still stands, but I see I made
that comment on v1, which is the last version you sent to the
linux-remoteproc@ mailing list.

Unfortunately the dt binding in v6 seem to have some issues still.


So based on that, I will have to ignore this patch until the binding has
landed - please help me remember this forward dependency when that day
comes.

And please include linux-remoteproc@ if you want the binding & driver
merged.

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 +++
>  arch/arm64/boot/dts/qcom/sc7280.dtsi    | 58 +++++++++++++++++++++++++++++++++
>  2 files changed, 62 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index 64fc22a..2b8bbcd 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -68,3 +68,7 @@
>  		qcom,pre-scaling = <1 1>;
>  	};
>  };
> +
> +&remoteproc_wpss {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 39635da..edc7951 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -134,6 +134,11 @@
>  			no-map;
>  		};
>  
> +		wpss_mem: memory@9ae00000 {
> +			no-map;
> +			reg = <0x0 0x9ae00000 0x0 0x1900000>;
> +		};
> +
>  		rmtfs_mem: memory@9c900000 {
>  			compatible = "qcom,rmtfs-mem";
>  			reg = <0x0 0x9c900000 0x0 0x280000>;
> @@ -2588,6 +2593,59 @@
>  			#power-domain-cells = <1>;
>  		};
>  
> +		remoteproc_wpss: remoteproc@8a00000 {
> +			compatible = "qcom,sc7280-wpss-pil";
> +			reg = <0 0x08a00000 0 0x10000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
> +					      <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +					      <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +					      <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +					      <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +					      <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "wdog", "fatal", "ready", "handover",
> +					  "stop-ack", "shutdown-ack";
> +
> +			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
> +				 <&gcc GCC_WPSS_AHB_CLK>,
> +				 <&gcc GCC_WPSS_RSCP_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "gcc_wpss_ahb_bdg_mst_clk",
> +				      "gcc_wpss_ahb_clk",
> +				      "gcc_wpss_rscp_clk",
> +				      "xo";
> +
> +			power-domains = <&rpmhpd SC7280_CX>,
> +					<&rpmhpd SC7280_MX>;
> +			power-domain-names = "cx", "mx";
> +
> +			memory-region = <&wpss_mem>;
> +
> +			qcom,qmp = <&aoss_qmp>;
> +
> +			qcom,smem-states = <&wpss_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
> +				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
> +			reset-names = "restart", "pdc_sync";
> +
> +			qcom,halt-regs = <&tcsr_mutex 0x37000>;
> +
> +			status = "disabled";
> +
> +			glink-edge {
> +				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> +							     IPCC_MPROC_SIGNAL_GLINK_QMP
> +							     IRQ_TYPE_EDGE_RISING>;
> +				mboxes = <&ipcc IPCC_CLIENT_WPSS
> +						IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> +				label = "wpss";
> +				qcom,remote-pid = <13>;
> +			};
> +		};
> +
>  		pdc: interrupt-controller@b220000 {
>  			compatible = "qcom,sc7280-pdc", "qcom,pdc";
>  			reg = <0 0x0b220000 0 0x30000>;
> -- 
> 2.7.4
>