* [PATCH 1/2] THERMAL: Add THERMAL driver for Sunplus SP7021
2021-11-01 8:45 [PATCH 0/2] Add THERMAL control driver for Sunplus SP7021 SoC LH.Kuo
@ 2021-11-01 8:45 ` LH.Kuo
2021-11-01 8:45 ` [PATCH 2/2] devicetree bindings THERMAL Add bindings doc " LH.Kuo
1 sibling, 0 replies; 4+ messages in thread
From: LH.Kuo @ 2021-11-01 8:45 UTC (permalink / raw)
To: rafael, daniel.lezcano, amitk, rui.zhang, robh+dt, linux-pm,
devicetree, linux-kernel
Cc: qinjian, wells.lu, LH.Kuo
Add THERMAL driver for Sunplus SP7021.
Signed-off-by: LH.Kuo <lh.kuo@sunplus.com>
---
MAINTAINERS | 6 +
drivers/thermal/Kconfig | 10 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/sunplus_thermal.c | 287 ++++++++++++++++++++++++++++++++++++++
4 files changed, 304 insertions(+)
create mode 100644 drivers/thermal/sunplus_thermal.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 3b79fd4..dff822b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17945,6 +17945,12 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c
+SUNPLUS THERMAL DRIVER
+M: LH Kuo <lh.kuo@sunplus.com>
+L: linux-pm@vger.kernel.org
+S: Maintained
+F: drivers/thermal/sunplus_thermal.c
+
SUPERH
M: Yoshinori Sato <ysato@users.sourceforge.jp>
M: Rich Felker <dalias@libc.org>
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44de..6643a81 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -493,4 +493,14 @@ config KHADAS_MCU_FAN_THERMAL
If you say yes here you get support for the FAN controlled
by the Microcontroller found on the Khadas VIM boards.
+config SUNPLUS_THERMAL
+ tristate "Sunplus thermal drivers"
+ depends on SOC_SP7021
+ help
+ This the Sunplus SP7021 thermal driver, which supports the primitive
+ temperature sensor embedded in Sunplus SP7021 SoC.
+
+ If you have a Sunplus SP7021 platform say Y here and enable this option
+ to have support for thermal management
+
endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e6..23f8dce 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o
obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o
+obj-$(CONFIG_SUNPLUS_THERMAL) += sunplus_thermal.o
\ No newline at end of file
diff --git a/drivers/thermal/sunplus_thermal.c b/drivers/thermal/sunplus_thermal.c
new file mode 100644
index 0000000..ab17fd7
--- /dev/null
+++ b/drivers/thermal/sunplus_thermal.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SP7021 SoC thermal driver.
+ * Copyright (C) Sunplus Tech/Tibbo Tech. 2019
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+#include <linux/nvmem-consumer.h>
+
+#define DISABLE_THREMAL (1<<31 | 1<<15)
+#define ENABLE_THREMAL (1<<31)
+
+// thermal_sts_0 last 10 bits
+#define TEMP_MASK 0x7FF
+
+#define TEMP_RATE 608
+
+/* common data structures */
+struct sp_thermal_data {
+ struct thermal_zone_device *pcb_tz;
+ enum thermal_device_mode mode;
+ struct platform_device *pdev;
+ long sensor_temp;
+ uint32_t id;
+ void __iomem *regs;
+};
+
+struct sp_thermal_data sp_thermal;
+
+#define MOO5_REG_NAME "thermal_reg"
+#define MOO4_REG_NAME "thermal_moon4"
+#define OTP_CALIB_REG "therm_calib"
+
+struct sp_thermal_reg {
+ unsigned int mo5_thermal_ctl0;
+ unsigned int mo5_thermal_ctl1;
+ unsigned int mo5_thermal_ctl2;
+ unsigned int mo5_thermal_ctl3;
+ unsigned int mo5_tmds_l2sw_ctl;
+ unsigned int mo5_l2sw_clksw_ctl;
+ unsigned int mo5_i2c2bus_ctl;
+ unsigned int mo5_pfcnt_ctl;
+ unsigned int mo5_pfcntl_sensor_ctl0;
+ unsigned int mo5_pfcntl_sensor_ctl1;
+ unsigned int mo5_pfcnt_sts0;
+ unsigned int mo5_pfcnt_sts1;
+ unsigned int mo5_thermal_sts0;
+ unsigned int mo5_thermal_sts1;
+ unsigned int mo5_rsv13;
+ unsigned int mo5_rsv14;
+ unsigned int mo5_rsv15;
+ unsigned int mo5_rsv16;
+ unsigned int mo5_rsv17;
+ unsigned int mo5_rsv18;
+ unsigned int mo5_rsv19;
+ unsigned int mo5_rsv20;
+ unsigned int mo5_rsv21;
+ unsigned int mo5_dc09_ctl0;
+ unsigned int mo5_dc09_ctl1;
+ unsigned int mo5_dc09_ctl2;
+ unsigned int mo5_dc12_ctl0;
+ unsigned int mo5_dc12_ctl1;
+ unsigned int mo5_dc12_ctl2;
+ unsigned int mo5_dc15_ctl0;
+ unsigned int mo5_dc15_ctl1;
+ unsigned int mo5_dc15_ctl2;
+};
+
+static struct sp_thermal_reg *thermal_reg_ptr;
+
+struct sp_ctl_reg {
+ unsigned int mo4_pllsp_ctl0;
+ unsigned int mo4_pllsp_ctl1;
+ unsigned int mo4_pllsp_ctl2;
+ unsigned int mo4_pllsp_ctl3;
+ unsigned int mo4_pllsp_ctl4;
+ unsigned int mo4_pllsp_ctl5;
+ unsigned int mo4_pllsp_ctl6;
+ unsigned int mo5_pfcnt_ctl;
+ unsigned int mo4_plla_ctl0;
+ unsigned int mo4_plla_ctl1;
+ unsigned int mo4_plla_ctl2;
+ unsigned int mo4_plla_ctl3;
+ unsigned int mo4_plla_ctl4;
+ unsigned int mo4_plle_ctl;
+ unsigned int mo4_pllf_ctl;
+ unsigned int mo4_plltv_ctl0;
+ unsigned int mo4_plltv_ctl1;
+ unsigned int mo4_plltv_ctl2;
+ unsigned int mo4_usbc_ctl;
+ unsigned int mo4_uphy0_ctl0;
+ unsigned int mo4_uphy0_ctl1;
+ unsigned int mo4_uphy0_ctl2;
+ unsigned int mo4_uphy1_ctl0;
+ unsigned int mo4_uphy1_ctl1;
+ unsigned int mo4_uphy1_ctl2;
+ unsigned int mo4_uphy1_ctl3;
+ unsigned int mo4_pllsys;
+ unsigned int mo_clk_sel0;
+ unsigned int mo_probe_sel;
+ unsigned int mo4_misc_ctl0;
+ unsigned int mo4_uphy0_sts;
+ unsigned int otp_st;
+};
+
+static struct sp_ctl_reg *sp_ctl_reg_ptr;
+
+int otp_thermal_t0;
+int otp_thermal_t1;
+
+char *sp7021_otp_coef_read(struct device *_d, ssize_t *_l)
+{
+ char *ret = NULL;
+ struct nvmem_cell *c = nvmem_cell_get(_d, OTP_CALIB_REG);
+
+ if (IS_ERR_OR_NULL(c)) {
+ dev_err(_d, "OTP read failure:%ld", PTR_ERR(c));
+ return NULL;
+ }
+ ret = nvmem_cell_read(c, _l);
+ nvmem_cell_put(c);
+ dev_dbg(_d, "%d bytes read from OTP", *_l);
+ return ret;
+}
+
+static void sp7021_get_otp_temp_coef(struct device *_d)
+{
+ ssize_t otp_l = 0;
+ char *otp_v;
+
+ otp_v = sp7021_otp_coef_read(_d, &otp_l);
+ if (otp_l < 3)
+ return;
+ if (IS_ERR_OR_NULL(otp_v))
+ return;
+ dev_dbg(_d, "OTP: %d %d %d", otp_v[0], otp_v[1], otp_v[2]);
+
+ otp_thermal_t0 = otp_v[0] | (otp_v[1] << 8);
+ otp_thermal_t0 = otp_thermal_t0 & TEMP_MASK;
+ otp_thermal_t1 = (otp_v[1] >> 3) | (otp_v[2] << 5);
+ otp_thermal_t1 = otp_thermal_t1 & TEMP_MASK;
+ if (otp_thermal_t0 == 0)
+ otp_thermal_t0 = 1518;
+}
+
+static int sp_thermal_get_sensor_temp(void *_data, int *temp)
+{
+ struct sp_thermal_data *data = _data;
+ struct sp_thermal_reg *thermal_reg = data->regs;
+ int t_code;
+
+ t_code = (readl(&(thermal_reg->mo5_thermal_sts0)) & TEMP_MASK);
+ *temp = ((otp_thermal_t0 - t_code)*10000/TEMP_RATE)+3500;
+ *temp *= 10; // milli means 10^-3!
+ dev_dbg(&(data->pdev->dev), "tc:%d t:%d", t_code, *temp);
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops sp_of_thermal_ops = {
+ .get_temp = sp_thermal_get_sensor_temp,
+};
+
+static int sp_thermal_register_sensor(struct platform_device *pdev,
+ struct sp_thermal_data *data,
+ int index)
+{
+ int ret;
+
+ data->id = index;
+ data->pcb_tz = devm_thermal_zone_of_sensor_register(&pdev->dev,
+ data->id, data, &sp_of_thermal_ops);
+ if (!IS_ERR_OR_NULL(data->pcb_tz))
+ return 0;
+ ret = PTR_ERR(data->pcb_tz);
+ data->pcb_tz = NULL;
+ dev_err(&pdev->dev, "sensor#%d reg fail: %d\n", index, ret);
+ return ret; }
+
+static int sp7021_thermal_probe(struct platform_device *_pd)
+{
+ struct sp_thermal_data *sp_data;
+ int ret;
+ struct resource *res;
+ void __iomem *reg_base;
+ void __iomem *ctl_base;
+ int ctl_code;
+
+ sp_data = devm_kzalloc(&(_pd->dev), sizeof(*sp_data), GFP_KERNEL);
+ if (!sp_data)
+ return -ENOMEM;
+
+ memset(&sp_thermal, 0, sizeof(sp_thermal));
+
+ res = platform_get_resource_byname(_pd, IORESOURCE_MEM, MOO5_REG_NAME);
+ if (IS_ERR(res)) {
+ dev_err(&(_pd->dev), "get_resource(%s) fail\n", MOO5_REG_NAME);
+ ret = PTR_ERR(res);
+ return ret;
+ }
+ reg_base = devm_ioremap(&(_pd->dev), res->start, resource_size(res));
+ if (IS_ERR(reg_base)) {
+ dev_err(&(_pd->dev), "ioremap_resource(%s) fail\n", MOO5_REG_NAME);
+ ret = PTR_ERR(res);
+ return ret;
+ }
+ sp_data->regs = reg_base;
+
+ res = platform_get_resource_byname(_pd, IORESOURCE_MEM, MOO4_REG_NAME);
+ if (IS_ERR(res)) {
+ dev_err(&(_pd->dev), "get_resource(%s) fail\n", MOO4_REG_NAME);
+ ret = PTR_ERR(res);
+ return ret;
+ }
+ ctl_base = devm_ioremap(&(_pd->dev), res->start, resource_size(res));
+ if (IS_ERR(reg_base)) {
+ dev_err(&(_pd->dev), "ioremap_resource(%s) fail\n", MOO4_REG_NAME);
+ ret = PTR_ERR(res);
+ return ret;
+ }
+
+ dev_dbg(&(_pd->dev), "reg:%p ctl:%p\n", reg_base, ctl_base);
+
+ thermal_reg_ptr = (struct sp_thermal_reg *)(reg_base);
+ sp_ctl_reg_ptr = (struct sp_ctl_reg *)(ctl_base);
+
+ // FIXME: enable thermal function - customize this part
+ writel(ENABLE_THREMAL, &(thermal_reg_ptr->mo5_thermal_ctl0));
+ // FIXME: it's just reg state. Clock enabled at different place
+ ctl_code = 0xFFFF & readl(&(sp_ctl_reg_ptr->mo_clk_sel0));
+ // writel(0x78F07810 , &sp_ctl_reg_ptr->mo_clk_sel0); // enable thermal function
+ dev_dbg(&(_pd->dev), "ctl_code %x ", ctl_code);
+
+ platform_set_drvdata(_pd, sp_data);
+ sp7021_get_otp_temp_coef(&(_pd->dev));
+ ret = sp_thermal_register_sensor(_pd, sp_data, 0);
+ if (ret == 0)
+ dev_info(&(_pd->dev), "by Sunplus (C) 2020");
+ return ret;
+}
+
+static int sp7021_thermal_remove(struct platform_device *_pd)
+{
+ // nothing to do case devm_*
+ return 0;
+}
+
+static const struct of_device_id of_sp7021_thermal_ids[] = {
+ { .compatible = "sunplus,sp7021-thermal" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_sp7021_thermal_ids);
+
+static struct platform_driver sp7021_thermal_driver = {
+ .probe = sp7021_thermal_probe,
+ .remove = sp7021_thermal_remove,
+ .driver = {
+ .name = "sp7021-thermal",
+ .of_match_table = of_match_ptr(of_sp7021_thermal_ids),
+ },
+};
+module_platform_driver(sp7021_thermal_driver);
+
+MODULE_AUTHOR("lH Kuo <lh.kuo@sunplus.com>");
+MODULE_DESCRIPTION("Thermal driver for SP7021 SoC");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] devicetree bindings THERMAL Add bindings doc for Sunplus SP7021
2021-11-01 8:45 [PATCH 0/2] Add THERMAL control driver for Sunplus SP7021 SoC LH.Kuo
2021-11-01 8:45 ` [PATCH 1/2] THERMAL: Add THERMAL driver for Sunplus SP7021 LH.Kuo
@ 2021-11-01 8:45 ` LH.Kuo
2021-11-12 15:44 ` Rob Herring
1 sibling, 1 reply; 4+ messages in thread
From: LH.Kuo @ 2021-11-01 8:45 UTC (permalink / raw)
To: rafael, daniel.lezcano, amitk, rui.zhang, robh+dt, linux-pm,
devicetree, linux-kernel
Cc: qinjian, wells.lu, LH.Kuo
Add devicetree bindings THERMAL Add bindings doc for Sunplus SP7021
Signed-off-by: LH.Kuo <lh.kuo@sunplus.com>
---
.../bindings/thermal/sunplus_thermal.yaml | 52 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
diff --git a/Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml b/Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
new file mode 100644
index 0000000..1875d04
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sunplus_thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus Thermal controller
+
+maintainers:
+ - lh.kuo <lh.kuo@sunplus.com>
+
+properties:
+ compatible:
+ enum:
+ - sunplus,sp7021-thermal
+
+ reg:
+ items:
+ - description: Base address and length of the Thermal registers
+ - description: Base address and length of the Thermal calibration registers
+
+ reg-names:
+ items:
+ - const: thermal_reg
+ - const: thermal_moon4
+
+ nvmem-cells:
+ maxItems: 1
+
+ nvmem-cell-names:
+ const: therm_calib
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal: serial@9c000280 {
+ compatible = "sunplus,sp7021-thermal";
+ reg = <0x9c000280 0x80>, <0x9c000200 0x80>;
+ reg-names = "thermal_reg", "thermal_moon4";
+ nvmem-cells = <&therm_calib>;
+ nvmem-cell-names = "therm_calib";
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index dff822b..2080b00 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17949,6 +17949,7 @@ SUNPLUS THERMAL DRIVER
M: LH Kuo <lh.kuo@sunplus.com>
L: linux-pm@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/thermal/sunplus_thermal.yaml
F: drivers/thermal/sunplus_thermal.c
SUPERH
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread