[RFC PATCH v2 0/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo

[RFC PATCH v2 0/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo

[Katherine Perez]

Hi Bjorn and Vinod,

I'm trying to enable the display subsystem on SM8150 but am having
trouble enabling the DISP_CC_MDSS_AHB_CLK. Trace shows "disp_cc_mdss_ahb_clk
status stuck at off". Do you have any pointers on enabling this clock?

msm_dsi_phy ae94400.dsi-phy: [drm:dsi_phy_driver_probe [msm]] *ERROR* dsi_phy_driver_probe: Unable to get ahb clk
disp_cc-sm8250 af00000.clock-controller: supply mmcx not found, using dummy regulator
platform ae96000.dsi: Fixing up cyclic dependency with ae00000.mdss:mdp@ae010000
------------[ cut here ]------------
disp_cc_mdss_ahb_clk status stuck at 'off'
WARNING: CPU: 6 PID: 76 at drivers/clk/qcom/clk-branch.c:91 clk_branch_wait+0x14c/0x164
CPU: 6 PID: 76 Comm: kworker/u16:2 Not tainted 5.15.0 #17
Hardware name: Microsoft Surface Duo (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : clk_branch_wait+0x14c/0x164
lr : clk_branch_wait+0x14c/0x164
sp : ffff80001078ba40
x29: ffff80001078ba40 x28: 0000000000000000 x27: ffff65e6008e2100
x26: ffffb8630ec8e278 x25: ffff65e60005e005 x24: ffffb8630ebc0f98
x23: ffffb8630e234dd8 x22: 0000000000000001 x21: ffffb8630d5b8b60
x20: 0000000000000000 x19: ffffb8630eb5e7b8 x18: 0000000000000030
x17: 2e726f74616c7567 x16: ffffb8630d5a3800 x15: ffffffffffffffff
x14: 0000000000000000 x13: 6f27207461206b63 x12: 7574732073757461
x11: 77705f313439386d x10: 0000000000000027 x9 : ffffb8630cf974bc
x8 : 0000000000000027 x7 : 0000000000000002 x6 : 0000000000000027
x5 : ffff65e6f93cc9a8 x4 : ffff80001078b890 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff65e600851d80
Call trace:
 clk_branch_wait+0x14c/0x164
 clk_branch2_enable+0x3c/0x60
 clk_core_enable+0x78/0x220
 clk_enable+0x38/0x60
 dsi_phy_enable_resource+0x98/0xac [msm]
 dsi_phy_driver_probe+0x29c/0x4f8 [msm]
 platform_probe+0x74/0xe4
 really_probe.part.0+0xa4/0x328
 __driver_probe_device+0xa0/0x150
 driver_probe_device+0x4c/0x164
 __device_attach_driver+0xc0/0x128
 bus_for_each_drv+0x84/0xe0
 __device_attach+0xe0/0x188
 device_initial_probe+0x20/0x2c
 bus_probe_device+0xa8/0xbc
 deferred_probe_work_func+0x90/0xc8
 process_one_work+0x1f4/0x43c
 worker_thread+0x78/0x4f0
 kthread+0x154/0x160
 ret_from_fork+0x10/0x20
---[ end trace 734ed75908fc6b0e ]---

Katherine Perez (4):
  arm64: dts: qcom: sm8150: add dispcc node
  arm64: dts: qcom: sm8150: add display nodes
  arm64: dts: qcom: sm8150: add DSI display nodes
  arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo

 .../dts/qcom/sm8150-microsoft-surface-duo.dts |  26 ++
 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 292 ++++++++++++++++++
 2 files changed, 318 insertions(+)

--
2.31.1

[RFC PATCH v2 1/4] arm64: dts: qcom: sm8150: add dispcc node

[Katherine Perez]

Add the display clock controller node to sm8150.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---

Changes since v1:
- Picked up Konrad's Reviewed-by

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 81b4ff2cc4cd..ee40af469fab 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -3260,6 +3261,30 @@ camnoc_virt: interconnect@ac00000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};

+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8150-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
--
2.31.1

[RFC PATCH v2 2/4] arm64: dts: qcom: sm8150: add display nodes

[Katherine Perez]

Add MDSS and MDP nodes to sm8150.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---

Changes since v1:
- Picked up Konrad's Reviewed-by

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 92 ++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index ee40af469fab..38dbc39103ba 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3261,6 +3261,98 @@ camnoc_virt: interconnect@ac00000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};

+		mdss: mdss@ae00000 {
+			compatible = "qcom,sm8150-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			iommus = <&apps_smmu 0x800 0x420>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: mdp@ae010000 {
+				compatible = "qcom,sm8150-dpu";
+				reg = <0x0ae01000 0x84208>,
+				      <0x0aeb0000 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8150-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
--
2.31.1

[RFC PATCH v2 3/4] arm64: dts: qcom: sm8150: add DSI display nodes

[Katherine Perez]

Add DSI controller and PHY nodes to sm8150.

Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 183 ++++++++++++++++++++++++++-
 1 file changed, 179 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 38dbc39103ba..afa612daefa1 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3261,6 +3261,35 @@ camnoc_virt: interconnect@ac00000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-275000000 {
+				opp-hz = /bits/ 64 <275000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-328580000 {
+				opp-hz = /bits/ 64 <328580000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-358000000 {
+				opp-hz = /bits/ 64 <358000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sm8150-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3351,6 +3380,152 @@ opp-460000000 {
 					};
 				};
 			};
+
+			dsi0: dsi@ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				phys = <&dsi0_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi0_phy: dsi-phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm-8150";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			dsi1: dsi@ae96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SM8150_CX>;
+
+				phys = <&dsi1_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi1_phy: dsi-phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm-8150";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
 		};
 
 		dispcc: clock-controller@af00000 {
@@ -3359,10 +3534,10 @@ dispcc: clock-controller@af00000 {
 			power-domains = <&rpmhpd SM8150_MMCX>;
 			required-opps = <&rpmhpd_opp_low_svs>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&dsi0_phy 0>,
+				 <&dsi0_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&dsi1_phy 1>,
 				 <0>,
 				 <0>;
 			clock-names = "bi_tcxo",
-- 
2.31.1

Re: [RFC PATCH v2 3/4] arm64: dts: qcom: sm8150: add DSI display nodes

[Bjorn Andersson]

On Fri 12 Nov 20:39 CST 2021, Katherine Perez wrote:

> Add DSI controller and PHY nodes to sm8150.
> 
> Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
> ---
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 183 ++++++++++++++++++++++++++-
>  1 file changed, 179 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 38dbc39103ba..afa612daefa1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3261,6 +3261,35 @@ camnoc_virt: interconnect@ac00000 {
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> +		dsi_opp_table: dsi-opp-table {

As this isn't a mmio device, can we please move it outside of /soc as
well?

> +			compatible = "operating-points-v2";
> +
> +			opp-19200000 {
> +				opp-hz = /bits/ 64 <19200000>;
> +				required-opps = <&rpmhpd_opp_min_svs>;
> +			};
> +
> +			opp-180000000 {
> +				opp-hz = /bits/ 64 <180000000>;
> +				required-opps = <&rpmhpd_opp_low_svs>;
> +			};
> +
> +			opp-275000000 {
> +				opp-hz = /bits/ 64 <275000000>;
> +				required-opps = <&rpmhpd_opp_svs>;
> +			};
> +
> +			opp-328580000 {
> +				opp-hz = /bits/ 64 <328580000>;
> +				required-opps = <&rpmhpd_opp_svs_l1>;
> +			};
> +
> +			opp-358000000 {
> +				opp-hz = /bits/ 64 <358000000>;
> +				required-opps = <&rpmhpd_opp_nom>;
> +			};
> +		};
> +
>  		mdss: mdss@ae00000 {
>  			compatible = "qcom,sm8150-mdss";
>  			reg = <0 0x0ae00000 0 0x1000>;
> @@ -3351,6 +3380,152 @@ opp-460000000 {
>  					};
>  				};
>  			};
> +
> +			dsi0: dsi@ae94000 {

If you change the label to mdss_dsi0: instead, they group nicely with
the other mdss related nodes in your device's dts.


Apart from that I think this series looks good.

Thanks,
Bjorn

> +				compatible = "qcom,mdss-dsi-ctrl";
> +				reg = <0 0x0ae94000 0 0x400>;
> +				reg-names = "dsi_ctrl";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&gcc GCC_DISP_HF_AXI_CLK>;
> +				clock-names = "byte",
> +					      "byte_intf",
> +					      "pixel",
> +					      "core",
> +					      "iface",
> +					      "bus";
> +
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
> +
> +				operating-points-v2 = <&dsi_opp_table>;
> +				power-domains = <&rpmhpd SM8150_MMCX>;
> +
> +				phys = <&dsi0_phy>;
> +				phy-names = "dsi";
> +
> +				status = "disabled";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						dsi0_in: endpoint {
> +							remote-endpoint = <&dpu_intf1_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						dsi0_out: endpoint {
> +						};
> +					};
> +				};
> +			};
> +
> +			dsi0_phy: dsi-phy@ae94400 {
> +				compatible = "qcom,dsi-phy-7nm-8150";
> +				reg = <0 0x0ae94400 0 0x200>,
> +				      <0 0x0ae94600 0 0x280>,
> +				      <0 0x0ae94900 0 0x260>;
> +				reg-names = "dsi_phy",
> +					    "dsi_phy_lane",
> +					    "dsi_pll";
> +
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&rpmhcc RPMH_CXO_CLK>;
> +				clock-names = "iface", "ref";
> +
> +				status = "disabled";
> +			};
> +
> +			dsi1: dsi@ae96000 {
> +				compatible = "qcom,mdss-dsi-ctrl";
> +				reg = <0 0x0ae96000 0 0x400>;
> +				reg-names = "dsi_ctrl";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> +					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> +					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&gcc GCC_DISP_HF_AXI_CLK>;
> +				clock-names = "byte",
> +					      "byte_intf",
> +					      "pixel",
> +					      "core",
> +					      "iface",
> +					      "bus";
> +
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> +				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
> +
> +				operating-points-v2 = <&dsi_opp_table>;
> +				power-domains = <&rpmhpd SM8150_CX>;
> +
> +				phys = <&dsi1_phy>;
> +				phy-names = "dsi";
> +
> +				status = "disabled";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						dsi1_in: endpoint {
> +							remote-endpoint = <&dpu_intf2_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						dsi1_out: endpoint {
> +						};
> +					};
> +				};
> +			};
> +
> +			dsi1_phy: dsi-phy@ae96400 {
> +				compatible = "qcom,dsi-phy-7nm-8150";
> +				reg = <0 0x0ae96400 0 0x200>,
> +				      <0 0x0ae96600 0 0x280>,
> +				      <0 0x0ae96900 0 0x260>;
> +				reg-names = "dsi_phy",
> +					    "dsi_phy_lane",
> +					    "dsi_pll";
> +
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&rpmhcc RPMH_CXO_CLK>;
> +				clock-names = "iface", "ref";
> +
> +				status = "disabled";
> +			};
>  		};
>  
>  		dispcc: clock-controller@af00000 {
> @@ -3359,10 +3534,10 @@ dispcc: clock-controller@af00000 {
>  			power-domains = <&rpmhpd SM8150_MMCX>;
>  			required-opps = <&rpmhpd_opp_low_svs>;
>  			clocks = <&rpmhcc RPMH_CXO_CLK>,
> -				 <0>,
> -				 <0>,
> -				 <0>,
> -				 <0>,
> +				 <&dsi0_phy 0>,
> +				 <&dsi0_phy 1>,
> +				 <&dsi1_phy 0>,
> +				 <&dsi1_phy 1>,
>  				 <0>,
>  				 <0>;
>  			clock-names = "bi_tcxo",
> -- 
> 2.31.1
> 

[RFC PATCH v2 4/4] arm64: dts: qcom: sm8150: display support for Microsoft Surface Duo

[Katherine Perez]

Add support for display to Microsoft Surface Duo.

Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
---
 .../dts/qcom/sm8150-microsoft-surface-duo.dts | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index 5901c28e6696..721f76b1b30c 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -270,6 +270,8 @@ vdda_hv_ebi1:
 		vdda_hv_ebi2:
 		vdda_hv_ebi3:
 		vdda_hv_refgen0:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
 		vdda_qlink_hv_ck:
 		vreg_l3c_1p2: ldo3 {
 			regulator-min-microvolt = <1200000>;
@@ -359,6 +361,26 @@ vreg_l6f_2p85: ldo6 {
 	};
 };
 
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_dsi_0_pll_0p9>;
+};
+
+&dsi1 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi1_1p2>;
+};
+
+&dsi1_phy {
+	status = "okay";
+	vdds-supply = <&vdda_dsi_1_pll_0p9>;
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -430,6 +452,10 @@ &i2c19 {
 	/* MAX34417 @ 0x1e */
 };
 
+&mdss {
+	status = "okay";
+};
+
 &pon {
 	pwrkey {
 		status = "okay";
-- 
2.31.1