From: Vinod Koul <vkoul@kernel.org>
To: Katherine Perez <kaperez@linux.microsoft.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] arm64: dts: add minimal DTS for Microsoft Surface Duo2
Date: Tue, 23 Nov 2021 09:30:01 +0530 [thread overview]
Message-ID: <YZxnQfB6V7GOlygq@matsya> (raw)
In-Reply-To: <20211122190552.74073-2-kaperez@linux.microsoft.com>
On 22-11-21, 11:05, Katherine Perez wrote:
> This is a minimal devicetree for Microsoft Surface Duo 2 with SM8350
> Chipset
>
> Signed-off-by: Katherine Perez <kaperez@linux.microsoft.com>
> ---
>
> Changes since v1:
> - Change remoteprocs firmware-naming scheme to qcom/sm8350/microsft/*
> - Add chassis-type
>
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../qcom/sm8350-microsoft-surface-duo2.dts | 369 ++++++++++++++++++
> 2 files changed, 370 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 6b816eb33309..a8cc6bd3c423 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -106,4 +106,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
> new file mode 100644
> index 000000000000..d4963c9015cb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
> @@ -0,0 +1,369 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (C) 2021, Microsoft Corporation
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sm8350.dtsi"
> +#include "pm8350.dtsi"
> +#include "pm8350b.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +#include "pmr735a.dtsi"
> +#include "pmr735b.dtsi"
> +
> +/ {
> + model = "Microsoft Surface Duo 2";
> + compatible = "microsoft,surface-duo2", "qcom,sm8350";
> + chassis-type = "handset";
This is interesting, I see it used at lot of place, unfortunately, it
does not seem to be documented :(
--
~Vinod
next prev parent reply other threads:[~2021-11-23 4:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-22 19:05 [RESEND PATCH 0/2] arm64: dts: sm8350: add support for Microsoft Surface Duo 2 Katherine Perez
2021-11-22 19:05 ` [PATCH v2 1/2] arm64: dts: add minimal DTS for Microsoft Surface Duo2 Katherine Perez
2021-11-23 4:00 ` Vinod Koul [this message]
2021-11-30 17:44 ` Katherine Perez
2021-11-22 19:05 ` [PATCH v2 2/2] arm64: dts: sm8350: fix tlmm base address Katherine Perez
2021-11-23 4:03 ` Vinod Koul
2021-12-01 3:15 ` Bjorn Andersson
2021-12-07 1:16 ` Katherine Perez
2021-12-07 11:46 ` Vinod Koul
2021-12-08 2:21 ` Katherine Perez
2021-12-08 2:35 ` Bjorn Andersson
2021-12-08 23:18 ` Katherine Perez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YZxnQfB6V7GOlygq@matsya \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kaperez@linux.microsoft.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).