Re: [PATCH 1/6] dt-bindings: interrupt-controller: apple,aic: Add apple,aic2 support

[Rob Herring <robh@kernel.org>]

On Thu, Dec 09, 2021 at 01:32:44PM +0900, Hector Martin wrote:
> This new incompatible revision of the AIC peripheral introduces
> multi-die support. To handle that, we introduce an optional
> 4-argument interrupt-cells form.
> 
> Also add an apple,event-reg property to specify the offset of the event
> register. Inexplicably, the capability registers allow us to compute
> other register offsets, but not this one. This allows us to keep
> forward-compatibility with future SoCs that will likely implement
> different die counts, thus shifting the event register. Apple do the
> same thing in their device tree...
> 
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
>  .../interrupt-controller/apple,aic.yaml       | 62 +++++++++++++++----
>  1 file changed, 49 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> index 97359024709a..6a8dd213e59a 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> @@ -18,38 +18,44 @@ description: |
>  
>    - Level-triggered hardware IRQs wired to SoC blocks
>      - Single mask bit per IRQ
> -    - Per-IRQ affinity setting
> +    - Per-IRQ affinity setting (AICv1 only)
>      - Automatic masking on event delivery (auto-ack)
>      - Software triggering (ORed with hw line)
>    - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable
> -    if not symmetric)
> +    if not symmetric) (AICv1 only)
>    - Automatic prioritization (single event/ack register per CPU, lower IRQs =
>      higher priority)
>    - Automatic masking on ack
> -  - Default "this CPU" register view and explicit per-CPU views
> +  - Default "this CPU" register view and explicit per-CPU views (AICv1 only)
>  
>    This device also represents the FIQ interrupt sources on platforms using AIC,
> -  which do not go through a discrete interrupt controller.
> -
> -allOf:
> -  - $ref: /schemas/interrupt-controller.yaml#
> +  which do not go through a discrete interrupt controller. It also handles
> +  FIQ-based Fast IPIs on supported chips.
>  
>  properties:
>    compatible:
> -    items:
> -      - const: apple,t8103-aic
> -      - const: apple,aic
> +    oneOf:
> +      - items:
> +          - const: apple,t8103-aic
> +          - const: apple,aic
> +      - items:
> +          - const: apple,t6000-aic
> +          - const: apple,aic2
>  
>    interrupt-controller: true
>  
>    '#interrupt-cells':
> -    const: 3
> +    minimum: 3
> +    maximum: 4
>      description: |
>        The 1st cell contains the interrupt type:
>          - 0: Hardware IRQ
>          - 1: FIQ
>  
> -      The 2nd cell contains the interrupt number.
> +      The optional 2nd cell contains the die ID (apple,aic2 only).
> +      If not present, it defaults to 0.
> +
> +      The next cell contains the interrupt number.
>          - HW IRQs: interrupt number
>          - FIQs:
>            - 0: physical HV timer
> @@ -57,7 +63,7 @@ properties:
>            - 2: physical guest timer
>            - 3: virtual guest timer
>  
> -      The 3rd cell contains the interrupt flags. This is normally
> +      The last cell contains the interrupt flags. This is normally
>        IRQ_TYPE_LEVEL_HIGH (4).
>  
>    reg:
> @@ -68,6 +74,13 @@ properties:
>    power-domains:
>      maxItems: 1
>  
> +  apple,event-reg:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Specifies the offset of the event register, which lies after all the
> +      implemented die register sets, page aligned. This is not computable from
> +      capability register values, so we have to specify it explicitly.
> +
>  required:
>    - compatible
>    - '#interrupt-cells'
> @@ -76,6 +89,29 @@ required:
>  
>  additionalProperties: false
>  
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - apple,aic
> +    then:
> +      properties:
> +        '#interrupt-cells':
> +          const: 3
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - apple,aic2
> +    then:
> +      required:
> +        - apple,event-reg

Is this property valid for aic1? If not, you need:

else:
  not:
    required:
      - apple,event-reg


I tend to think you should just make this a separate document. There's 
not a whole lot of sharing (compared to any other interrupt controller).

> +
>  examples:
>    - |
>      soc {
> -- 
> 2.33.0
> 
>