Re: [PATCH v2] dt-bindings: phy: convert Qualcomm USB HS phy to yaml

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Wed 29 Dec 16:07 PST 2021, David Heidelberg wrote:

> Conversion of Qualcomm USB HS phy documentation to yaml.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> v2:
>  - changed uint8 array to matrix
>  - improved clock-names check
>  - move reset-names items, adjust DTS files later
>  - added clocks and resets min and maxItems
>  - if'ed resets, since apq8064 doesn't have phy reset
> ---
>  .../bindings/phy/qcom,usb-hs-phy.txt          |  84 --------------
>  .../bindings/phy/qcom,usb-hs-phy.yaml         | 108 ++++++++++++++++++
>  2 files changed, 108 insertions(+), 84 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
> deleted file mode 100644
> index b3b75c1e6285..000000000000
> --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -Qualcomm's USB HS PHY
> -
> -PROPERTIES
> -
> -- compatible:
> -    Usage: required
> -    Value type: <string>
> -    Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
> -                following:
> -
> -                        "qcom,usb-hs-phy-apq8064"
> -                        "qcom,usb-hs-phy-msm8916"
> -                        "qcom,usb-hs-phy-msm8974"
> -
> -- #phy-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Should contain 0
> -
> -- clocks:
> -    Usage: required
> -    Value type: <prop-encoded-array>
> -    Definition: Should contain clock specifier for the reference and sleep
> -                clocks
> -
> -- clock-names:
> -    Usage: required
> -    Value type: <stringlist>
> -    Definition: Should contain "ref" and "sleep" for the reference and sleep
> -                clocks respectively
> -
> -- resets:
> -    Usage: required
> -    Value type: <prop-encoded-array>
> -    Definition: Should contain the phy and POR resets
> -
> -- reset-names:
> -    Usage: required
> -    Value type: <stringlist>
> -    Definition: Should contain "phy" and "por" for the phy and POR resets
> -                respectively
> -
> -- v3p3-supply:
> -    Usage: required
> -    Value type: <phandle>
> -    Definition: Should contain a reference to the 3.3V supply
> -
> -- v1p8-supply:
> -    Usage: required
> -    Value type: <phandle>
> -    Definition: Should contain a reference to the 1.8V supply
> -
> -- extcon:
> -    Usage: optional
> -    Value type: <prop-encoded-array>
> -    Definition: Should contain the vbus extcon
> -
> -- qcom,init-seq:
> -    Usage: optional
> -    Value type: <u8 array>
> -    Definition: Should contain a sequence of ULPI address and value pairs to
> -                program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
> -                to Device Mode Eye Diagram test. The addresses are offsets
> -                from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
> -                <0x1 0x53> would mean "write the value 0x53 to address 0x81".
> -
> -EXAMPLE
> -
> -otg: usb-controller {
> -	ulpi {
> -		phy {
> -			compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
> -			#phy-cells = <0>;
> -			clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
> -			clock-names = "ref", "sleep";
> -			resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
> -			reset-names = "phy", "por";
> -			v3p3-supply = <&pm8941_l24>;
> -			v1p8-supply = <&pm8941_l6>;
> -			extcon = <&smbb>;
> -			qcom,init-seq = /bits/ 8 <0x1 0x63>;
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> new file mode 100644
> index 000000000000..a60386bd19b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's USB HS PHY binding description
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: qcom,usb-hs-phy-apq8064
> +  then:
> +    properties:
> +      resets:
> +        maxItems: 1
> +
> +      reset-names:
> +        const: por
> +
> +  else:
> +    properties:
> +      resets:
> +        minItems: 2
> +        maxItems: 2
> +
> +      reset-names:
> +        items:
> +          - const: phy
> +          - const: por
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,usb-hs-phy-apq8064
> +          - qcom,usb-hs-phy-msm8916
> +          - qcom,usb-hs-phy-msm8974
> +      - const: qcom,usb-hs-phy
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +
> +  clock-names:
> +    maxItems: 2
> +    contains:
> +      items:
> +        - const: ref
> +        - const: sleep
> +
> +  resets: true
> +
> +  reset-names: true
> +
> +  v1p8-supply: true
> +
> +  v3p3-supply: true
> +
> +  extcon: true
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  qcom,init-seq:
> +    $ref: /schemas/types.yaml#/definitions/uint8-matrix
> +    description: >
> +      Sequence of ULPI address and value pairs to
> +      program into the ULPI_EXT_VENDOR_SPECIFIC area.
> +      This is related to Device Mode Eye Diagram test.
> +    maxItems: 32 # no hard limit
> +    items:
> +      items:
> +        - description: >
> +            the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address
> +        - description: value
> +
> +required:
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    otg: usb-controller {
> +      ulpi {
> +        phy {
> +          compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
> +          #phy-cells = <0>;
> +          clocks = <&clk 0>, <&clk 258>;
> +          clock-names = "ref", "sleep";
> +          resets = <&gcc 10>, <&otg 0>;
> +          reset-names = "phy", "por";
> +          v3p3-supply = <&pm8941_l24>;
> +          v1p8-supply = <&pm8941_l6>;
> +          extcon = <&smbb>;
> +          qcom,init-seq = /bits/ 8 <0x1 0x63>;
> +        };
> +      };
> +    };
> -- 
> 2.34.1
>