From: Jonathan McDowell <noodles@earth.li>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ansuel Smith <ansuelsmth@gmail.com>,
Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 03/17] ARM: dts: qcom: add missing rpm regulators and cells for ipq8064
Date: Tue, 1 Feb 2022 14:39:20 +0000 [thread overview]
Message-ID: <YflGGM45F3TqERNj@earth.li> (raw)
In-Reply-To: <Yfhmum8BnB1JIALP@builder.lan>
On Mon, Jan 31, 2022 at 04:46:18PM -0600, Bjorn Andersson wrote:
> On Mon 17 Jan 19:20 CST 2022, Ansuel Smith wrote:
>
> > Add cells definition for rpm node and add missing regulators for the 4
> > regulator present on ipq8064. There regulators are controlled by rpm and
> > to correctly works gsbi4_i2c require to be NEVER disabled or rpm will
> > reject any regulator change request.
> >
>
> Is the SMB208 mandatory on all ipq8064 designs, or should this be pushed
> out to the device dts?
It's not; the RB3011 uses a different regulator (a TPS563900).
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> > arch/arm/boot/dts/qcom-ipq8064.dtsi | 35 +++++++++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > index 094125605bea..824cf13dd037 100644
> > --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> > @@ -829,10 +829,45 @@ rpm: rpm@108000 {
> > clocks = <&gcc RPM_MSG_RAM_H_CLK>;
> > clock-names = "ram";
> >
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > rpmcc: clock-controller {
> > compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
> > #clock-cells = <1>;
> > };
> > +
> > + regulators {
> > + compatible = "qcom,rpm-smb208-regulators";
> > +
> > + smb208_s1a: s1a {
> > + regulator-min-microvolt = <1050000>;
> > + regulator-max-microvolt = <1150000>;
> > +
> > + qcom,switch-mode-frequency = <1200000>;
> > + };
> > +
> > + smb208_s1b: s1b {
> > + regulator-min-microvolt = <1050000>;
> > + regulator-max-microvolt = <1150000>;
> > +
> > + qcom,switch-mode-frequency = <1200000>;
> > + };
> > +
> > + smb208_s2a: s2a {
> > + regulator-min-microvolt = < 800000>;
> > + regulator-max-microvolt = <1250000>;
> > +
> > + qcom,switch-mode-frequency = <1200000>;
> > + };
> > +
> > + smb208_s2b: s2b {
> > + regulator-min-microvolt = < 800000>;
> > + regulator-max-microvolt = <1250000>;
> > +
> > + qcom,switch-mode-frequency = <1200000>;
> > + };
> > + };
> > };
> >
> > tcsr: syscon@1a400000 {
> > --
> > 2.33.1
> >
J.
--
... "There's no money, there's no weed. It's all been replaced by a fucking
big pile of corpses." -- Lock, Stock and Two Smoking Barrels
next prev parent reply other threads:[~2022-02-01 14:39 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-18 1:20 [PATCH 00/17] Multiple addition to ipq8064 dtsi Ansuel Smith
2022-01-18 1:20 ` [PATCH 01/17] ARM: dts: qcom: add multiple missing pin definition for ipq8064 Ansuel Smith
2022-01-18 1:20 ` [PATCH 02/17] ARM: dts: qcom: add gsbi6 missing " Ansuel Smith
2022-02-01 14:37 ` Jonathan McDowell
2022-01-18 1:20 ` [PATCH 03/17] ARM: dts: qcom: add missing rpm regulators and cells " Ansuel Smith
2022-01-31 22:46 ` Bjorn Andersson
2022-02-01 14:39 ` Jonathan McDowell [this message]
2022-02-01 21:58 ` Ansuel Smith
2022-02-02 8:03 ` Jonathan McDowell
2022-01-18 1:20 ` [PATCH 04/17] ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064 Ansuel Smith
2022-01-18 1:20 ` [PATCH 05/17] ARM: dts: qcom: enable usb phy by default for ipq8064 Ansuel Smith
2022-01-18 1:20 ` [PATCH 06/17] ARM: dts: qcom: reduce pci IO size to 64K " Ansuel Smith
2022-01-18 1:20 ` [PATCH 07/17] ARM: dts: qcom: fix dtc warning for missing #address-cells " Ansuel Smith
2022-01-18 1:20 ` [PATCH 08/17] ARM: dts: qcom: add smem node " Ansuel Smith
2022-01-18 1:20 ` [PATCH 09/17] ARM: dts: qcom: add saw for l2 cache and kraitcc " Ansuel Smith
2022-01-18 1:20 ` [PATCH 10/17] ARM: dts: qcom: add sic non secure node " Ansuel Smith
2022-01-18 1:20 ` [PATCH 11/17] ARM: dts: qcom: fix and add some missing gsbi " Ansuel Smith
2022-01-18 1:20 ` [PATCH 12/17] ARM: dts: qcom: add opp table for cpu and l2 " Ansuel Smith
2022-01-31 22:49 ` Bjorn Andersson
2022-02-01 21:56 ` Ansuel Smith
2022-01-18 1:20 ` [PATCH 13/16] ARM: dts: qcom: add multiple missing binding " Ansuel Smith
2022-01-18 1:20 ` [PATCH 13/17] ARM: dts: qcom: add speedbin efuse nvmem binding Ansuel Smith
2022-01-18 1:20 ` [PATCH 14/17] ARM: dts: qcom: add multiple missing binding for cpu and l2 for ipq8064 Ansuel Smith
2022-01-18 1:20 ` [PATCH 14/16] ARM: dts: qcom: remove redundant binding from ipq8064 rb3011 dts Ansuel Smith
2022-01-18 1:20 ` [PATCH 15/16] ARM: dts: qcom: add ipq8064-v2.0 dtsi Ansuel Smith
2022-01-18 1:20 ` [PATCH 15/17] ARM: dts: qcom: remove redundant binding from ipq8064 rb3011 dts Ansuel Smith
2022-01-18 1:20 ` [PATCH 16/17] ARM: dts: qcom: add ipq8064-v2.0 dtsi Ansuel Smith
2022-01-18 1:20 ` [PATCH 16/16] ARM: dts: qcom: add ipq8065 dtsi Ansuel Smith
2022-01-18 1:20 ` [PATCH 17/17] " Ansuel Smith
2022-01-31 22:51 ` [PATCH 00/17] Multiple addition to ipq8064 dtsi Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YflGGM45F3TqERNj@earth.li \
--to=noodles@earth.li \
--cc=agross@kernel.org \
--cc=ansuelsmth@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).