devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Andy Gross <agross@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Stanimir Varbanov <svarbanov@mm-sol.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Krzysztof Wilczy??ski <kw@linux.com>,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org, linux-phy@lists.infradead.org
Subject: Re: [PATCH v5 2/5] PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg
Date: Thu, 3 Feb 2022 07:47:20 -0800	[thread overview]
Message-ID: <Yfv5CEex29bIX3D9@ripper> (raw)
In-Reply-To: <20211218141024.500952-3-dmitry.baryshkov@linaro.org>

On Sat 18 Dec 06:10 PST 2021, Dmitry Baryshkov wrote:

> In preparation to adding more flags to configuration data, use pointer
> to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than
> duplicating all its fields. This would save us from the boilerplate code
> that just copies flag values from one struct to another one.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 31 +++++++++++---------------
>  1 file changed, 13 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4e668da96ef4..1204011c96ee 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -200,8 +200,7 @@ struct qcom_pcie {
>  	union qcom_pcie_resources res;
>  	struct phy *phy;
>  	struct gpio_desc *reset;
> -	const struct qcom_pcie_ops *ops;
> -	unsigned int pipe_clk_need_muxing:1;
> +	const struct qcom_pcie_cfg *cfg;
>  };
>  
>  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
> @@ -225,8 +224,8 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
>  	struct qcom_pcie *pcie = to_qcom_pcie(pci);
>  
>  	/* Enable Link Training state machine */
> -	if (pcie->ops->ltssm_enable)
> -		pcie->ops->ltssm_enable(pcie);
> +	if (pcie->cfg->ops->ltssm_enable)
> +		pcie->cfg->ops->ltssm_enable(pcie);
>  
>  	return 0;
>  }
> @@ -1145,7 +1144,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
>  	if (ret < 0)
>  		return ret;
>  
> -	if (pcie->pipe_clk_need_muxing) {
> +	if (pcie->cfg->pipe_clk_need_muxing) {
>  		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
>  		if (IS_ERR(res->pipe_clk_src))
>  			return PTR_ERR(res->pipe_clk_src);
> @@ -1180,7 +1179,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
>  	}
>  
>  	/* Set pipe clock as clock source for pcie_pipe_clk_src */
> -	if (pcie->pipe_clk_need_muxing)
> +	if (pcie->cfg->pipe_clk_need_muxing)
>  		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
>  
>  	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
> @@ -1243,7 +1242,7 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
>  	clk_bulk_disable_unprepare(res->num_clks, res->clks);
>  
>  	/* Set TCXO as clock source for pcie_pipe_clk_src */
> -	if (pcie->pipe_clk_need_muxing)
> +	if (pcie->cfg->pipe_clk_need_muxing)
>  		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
>  
>  	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
> @@ -1336,7 +1335,7 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
>  
>  	qcom_ep_reset_assert(pcie);
>  
> -	ret = pcie->ops->init(pcie);
> +	ret = pcie->cfg->ops->init(pcie);
>  	if (ret)
>  		return ret;
>  
> @@ -1346,8 +1345,8 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
>  
>  	qcom_ep_reset_deassert(pcie);
>  
> -	if (pcie->ops->config_sid) {
> -		ret = pcie->ops->config_sid(pcie);
> +	if (pcie->cfg->ops->config_sid) {
> +		ret = pcie->cfg->ops->config_sid(pcie);
>  		if (ret)
>  			goto err;
>  	}
> @@ -1358,7 +1357,7 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
>  	qcom_ep_reset_assert(pcie);
>  	phy_power_off(pcie->phy);
>  err_deinit:
> -	pcie->ops->deinit(pcie);
> +	pcie->cfg->ops->deinit(pcie);
>  
>  	return ret;
>  }
> @@ -1468,7 +1467,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	struct pcie_port *pp;
>  	struct dw_pcie *pci;
>  	struct qcom_pcie *pcie;
> -	const struct qcom_pcie_cfg *pcie_cfg;
>  	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> @@ -1485,15 +1483,12 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pci = pci;
>  
> -	pcie_cfg = of_device_get_match_data(dev);
> -	if (!pcie_cfg || !pcie_cfg->ops) {
> +	pcie->cfg = of_device_get_match_data(dev);
> +	if (!pcie->cfg || !pcie->cfg->ops) {
>  		dev_err(dev, "Invalid platform data\n");
>  		return -EINVAL;
>  	}
>  
> -	pcie->ops = pcie_cfg->ops;
> -	pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing;
> -
>  	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
>  	if (IS_ERR(pcie->reset))
>  		return PTR_ERR(pcie->reset);
> @@ -1510,7 +1505,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	if (IS_ERR(pcie->phy))
>  		return PTR_ERR(pcie->phy);
>  
> -	ret = pcie->ops->get_resources(pcie);
> +	ret = pcie->cfg->ops->get_resources(pcie);
>  	if (ret)
>  		return ret;
>  
> -- 
> 2.34.1
> 

  reply	other threads:[~2022-02-03 15:47 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-18 14:10 [PATCH v5 0/5] qcom: add support for PCIe on SM8450 platform Dmitry Baryshkov
2021-12-18 14:10 ` [PATCH v5 1/5] dt-bindings: pci: qcom: Document PCIe bindings for SM8450 Dmitry Baryshkov
2021-12-21 14:59   ` Rob Herring
2021-12-21 15:43     ` Dmitry Baryshkov
2021-12-21 19:52       ` Rob Herring
2021-12-21 21:09         ` Dmitry Baryshkov
2021-12-21 23:35   ` Rob Herring
2022-02-03 17:11   ` Bjorn Andersson
2021-12-18 14:10 ` [PATCH v5 2/5] PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg Dmitry Baryshkov
2022-02-03 15:47   ` Bjorn Andersson [this message]
2021-12-18 14:10 ` [PATCH v5 3/5] PCI: qcom: Add ddrss_sf_tbu flag Dmitry Baryshkov
2022-02-03 15:52   ` Bjorn Andersson
2021-12-18 14:10 ` [PATCH v5 4/5] PCI: qcom: Add interconnect support to 2.7.0/1.9.0 ops Dmitry Baryshkov
2022-02-03 15:57   ` Bjorn Andersson
2022-02-04 14:38     ` Dmitry Baryshkov
2022-02-11 16:12       ` Lorenzo Pieralisi
2022-02-22 23:47         ` Bjorn Andersson
2022-02-23  9:31           ` Lorenzo Pieralisi
2022-02-23 10:15             ` Dmitry Baryshkov
2022-02-22 23:46       ` Bjorn Andersson
2022-02-22 23:49   ` Bjorn Andersson
2022-02-23  8:37     ` Dmitry Baryshkov
2021-12-18 14:10 ` [PATCH v5 5/5] PCI: qcom: Add SM8450 PCIe support Dmitry Baryshkov
2022-02-03 17:10   ` Bjorn Andersson
2022-02-03 11:54 ` [PATCH v5 0/5] qcom: add support for PCIe on SM8450 platform Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yfv5CEex29bIX3D9@ripper \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=kishon@ti.com \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).