Re: [PATCH v2 7/8] dt-bindings: phy: qcom,qmp: Describe phy@ subnode properly

[Rob Herring <robh@kernel.org>]

On Mon, Feb 28, 2022 at 06:00:18PM +0530, Bhupesh Sharma wrote:
> Currently the qcom,qmp-phy dt-binding doesn't describe
> the 'reg' and '#phy-cells' properties for the phy@ subnode.
> 
> Fix the same.
> 
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index 70e7cd75e173..f8a43acd229a 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -115,6 +115,13 @@ patternProperties:
>        Each device node of QMP phy is required to have as many child nodes as
>        the number of lanes the PHY has.
>      properties:
> +      reg:
> +        minItems: 1
> +        maxItems: 6

You need to define what each entry is.

> +
> +      "#phy-cells":
> +        const: 0
> +
>        "#clock-cells":
>          enum: [ 0, 1, 2 ]
>  
> -- 
> 2.35.1
> 
>