* [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings [not found] <20220328064931.11612-1-biju.das.jz@bp.renesas.com> @ 2022-03-28 6:49 ` Biju Das 2022-04-01 0:38 ` Rob Herring ` (2 more replies) 0 siblings, 3 replies; 6+ messages in thread From: Biju Das @ 2022-03-28 6:49 UTC (permalink / raw) To: David Airlie, Daniel Vetter, Rob Herring Cc: Biju Das, dri-devel, devicetree, Geert Uytterhoeven, Chris Paterson, Biju Das, Prabhakar Mahadev Lad, linux-renesas-soc The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It can operate in DSI mode, with up to four data lanes. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- v1->v2: * Added full path for dsi-controller.yaml * Modeled DSI + D-PHY as single block and updated reg property * Fixed typo D_PHY->D-PHY * Updated description * Added interrupts and interrupt-names and updated the example RFC->v1: * Added a ref to dsi-controller.yaml. RFC:- * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@bp.renesas.com/ --- .../bindings/display/bridge/renesas,dsi.yaml | 175 ++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml new file mode 100644 index 000000000000..eebbf617c484 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L MIPI DSI Encoder + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +description: | + This binding describes the MIPI DSI encoder embedded in the Renesas + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with + up to four data lanes. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + enum: + - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L + + reg: + maxItems: 1 + + interrupts: + items: + - description: Sequence operation channel 0 interrupt + - description: Sequence operation channel 1 interrupt + - description: Video-Input operation channel 1 interrupt + - description: DSI Packet Receive interrupt + - description: DSI Fatal Error interrupt + - description: DSI D-PHY PPI interrupt + - description: Debug interrupt + + interrupt-names: + items: + - const: seq0 + - const: seq1 + - const: vin1 + - const: rcv + - const: ferr + - const: ppi + - const: debug + + clocks: + items: + - description: DSI D-PHY PLL multiplied clock + - description: DSI D-PHY system clock + - description: DSI AXI bus clock + - description: DSI Register access clock + - description: DSI Video clock + - description: DSI D-PHY Escape mode Receive clock + + clock-names: + items: + - const: pllclk + - const: sysclk + - const: aclk + - const: pclk + - const: vclk + - const: lpclk + + resets: + items: + - description: MIPI_DSI_CMN_RSTB + - description: MIPI_DSI_ARESET_N + - description: MIPI_DSI_PRESET_N + + reset-names: + items: + - const: rst + - const: arst + - const: prst + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/r9a07g044-cpg.h> + + dsi0: dsi@10850000 { + compatible = "renesas,rzg2l-mipi-dsi"; + reg = <0x10850000 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; + }; +... -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings 2022-03-28 6:49 ` [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings Biju Das @ 2022-04-01 0:38 ` Rob Herring 2022-04-15 10:16 ` Laurent Pinchart 2022-04-19 8:56 ` Geert Uytterhoeven 2 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2022-04-01 0:38 UTC (permalink / raw) To: Biju Das Cc: Rob Herring, David Airlie, linux-renesas-soc, Geert Uytterhoeven, Biju Das, dri-devel, Prabhakar Mahadev Lad, Chris Paterson, devicetree, Daniel Vetter On Mon, 28 Mar 2022 07:49:30 +0100, Biju Das wrote: > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It > can operate in DSI mode, with up to four data lanes. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- > v1->v2: > * Added full path for dsi-controller.yaml > * Modeled DSI + D-PHY as single block and updated reg property > * Fixed typo D_PHY->D-PHY > * Updated description > * Added interrupts and interrupt-names and updated the example > RFC->v1: > * Added a ref to dsi-controller.yaml. > RFC:- > * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@bp.renesas.com/ > --- > .../bindings/display/bridge/renesas,dsi.yaml | 175 ++++++++++++++++++ > 1 file changed, 175 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings 2022-03-28 6:49 ` [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings Biju Das 2022-04-01 0:38 ` Rob Herring @ 2022-04-15 10:16 ` Laurent Pinchart 2022-04-18 19:48 ` Biju Das 2022-04-19 8:56 ` Geert Uytterhoeven 2 siblings, 1 reply; 6+ messages in thread From: Laurent Pinchart @ 2022-04-15 10:16 UTC (permalink / raw) To: Biju Das Cc: David Airlie, Daniel Vetter, Rob Herring, devicetree, Chris Paterson, Geert Uytterhoeven, Prabhakar Mahadev Lad, dri-devel, Biju Das, linux-renesas-soc Hi Biju, Thank you for the patch. On Mon, Mar 28, 2022 at 07:49:30AM +0100, Biju Das wrote: > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It > can operate in DSI mode, with up to four data lanes. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- > v1->v2: > * Added full path for dsi-controller.yaml > * Modeled DSI + D-PHY as single block and updated reg property > * Fixed typo D_PHY->D-PHY > * Updated description > * Added interrupts and interrupt-names and updated the example > RFC->v1: > * Added a ref to dsi-controller.yaml. > RFC:- > * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@bp.renesas.com/ > --- > .../bindings/display/bridge/renesas,dsi.yaml | 175 ++++++++++++++++++ > 1 file changed, 175 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > new file mode 100644 > index 000000000000..eebbf617c484 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > @@ -0,0 +1,175 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas RZ/G2L MIPI DSI Encoder > + > +maintainers: > + - Biju Das <biju.das.jz@bp.renesas.com> > + > +description: | > + This binding describes the MIPI DSI encoder embedded in the Renesas > + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with > + up to four data lanes. > + > +allOf: > + - $ref: /schemas/display/dsi-controller.yaml# > + > +properties: > + compatible: > + enum: > + - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: Sequence operation channel 0 interrupt > + - description: Sequence operation channel 1 interrupt > + - description: Video-Input operation channel 1 interrupt > + - description: DSI Packet Receive interrupt > + - description: DSI Fatal Error interrupt > + - description: DSI D-PHY PPI interrupt > + - description: Debug interrupt > + > + interrupt-names: > + items: > + - const: seq0 > + - const: seq1 > + - const: vin1 > + - const: rcv > + - const: ferr > + - const: ppi > + - const: debug > + > + clocks: > + items: > + - description: DSI D-PHY PLL multiplied clock > + - description: DSI D-PHY system clock > + - description: DSI AXI bus clock > + - description: DSI Register access clock > + - description: DSI Video clock > + - description: DSI D-PHY Escape mode Receive clock Isn't this the escape mode *transmit* clock ? > + > + clock-names: > + items: > + - const: pllclk > + - const: sysclk > + - const: aclk > + - const: pclk > + - const: vclk > + - const: lpclk > + > + resets: > + items: > + - description: MIPI_DSI_CMN_RSTB > + - description: MIPI_DSI_ARESET_N > + - description: MIPI_DSI_PRESET_N > + > + reset-names: > + items: > + - const: rst > + - const: arst > + - const: prst > + > + power-domains: > + maxItems: 1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Parallel input port > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: DSI output port > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 You should specify the acceptable values, especially given that the hardware doesn't seem to support lane reordering. > + > + required: > + - data-lanes > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - clocks > + - clock-names > + - resets > + - reset-names > + - power-domains > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/r9a07g044-cpg.h> Could you please swap those two lines to get them sorted alphabetically ? With these comments addressed, Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > + dsi0: dsi@10850000 { > + compatible = "renesas,rzg2l-mipi-dsi"; > + reg = <0x10850000 0x20000>; > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "seq0", "seq1", "vin1", "rcv", > + "ferr", "ppi", "debug"; > + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; > + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; > + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, > + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, > + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; > + reset-names = "rst", "arst", "prst"; > + power-domains = <&cpg>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&du_out_dsi0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&adv7535_in>; > + }; > + }; > + }; > + }; > +... -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings 2022-04-15 10:16 ` Laurent Pinchart @ 2022-04-18 19:48 ` Biju Das 0 siblings, 0 replies; 6+ messages in thread From: Biju Das @ 2022-04-18 19:48 UTC (permalink / raw) To: Laurent Pinchart Cc: David Airlie, Daniel Vetter, Rob Herring, devicetree@vger.kernel.org, Chris Paterson, Geert Uytterhoeven, Prabhakar Mahadev Lad, dri-devel@lists.freedesktop.org, Biju Das, linux-renesas-soc@vger.kernel.org Hi Laurent, Thanks for the feedback. > Subject: Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L > MIPI DSI TX bindings > > Hi Biju, > > Thank you for the patch. > > On Mon, Mar 28, 2022 at 07:49:30AM +0100, Biju Das wrote: > > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. > > It can operate in DSI mode, with up to four data lanes. > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > --- > > v1->v2: > > * Added full path for dsi-controller.yaml > > * Modeled DSI + D-PHY as single block and updated reg property > > * Fixed typo D_PHY->D-PHY > > * Updated description > > * Added interrupts and interrupt-names and updated the example > > RFC->v1: > > * Added a ref to dsi-controller.yaml. > > RFC:- > > * > > --- > > .../bindings/display/bridge/renesas,dsi.yaml | 175 > > ++++++++++++++++++ > > 1 file changed, 175 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > > b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > > new file mode 100644 > > index 000000000000..eebbf617c484 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yam > > +++ l > > @@ -0,0 +1,175 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > +$id: > > > > + > > +title: Renesas RZ/G2L MIPI DSI Encoder > > + > > +maintainers: > > + - Biju Das <biju.das.jz@bp.renesas.com> > > + > > +description: | > > + This binding describes the MIPI DSI encoder embedded in the Renesas > > + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, > > +with > > + up to four data lanes. > > + > > +allOf: > > + - $ref: /schemas/display/dsi-controller.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + items: > > + - description: Sequence operation channel 0 interrupt > > + - description: Sequence operation channel 1 interrupt > > + - description: Video-Input operation channel 1 interrupt > > + - description: DSI Packet Receive interrupt > > + - description: DSI Fatal Error interrupt > > + - description: DSI D-PHY PPI interrupt > > + - description: Debug interrupt > > + > > + interrupt-names: > > + items: > > + - const: seq0 > > + - const: seq1 > > + - const: vin1 > > + - const: rcv > > + - const: ferr > > + - const: ppi > > + - const: debug > > + > > + clocks: > > + items: > > + - description: DSI D-PHY PLL multiplied clock > > + - description: DSI D-PHY system clock > > + - description: DSI AXI bus clock > > + - description: DSI Register access clock > > + - description: DSI Video clock > > + - description: DSI D-PHY Escape mode Receive clock > > Isn't this the escape mode *transmit* clock ? Yep, There is a mismatch between clk document and hardware manual. I have reported this issue to HW team for fixing the clk document. > > > + > > + clock-names: > > + items: > > + - const: pllclk > > + - const: sysclk > > + - const: aclk > > + - const: pclk > > + - const: vclk > > + - const: lpclk > > + > > + resets: > > + items: > > + - description: MIPI_DSI_CMN_RSTB > > + - description: MIPI_DSI_ARESET_N > > + - description: MIPI_DSI_PRESET_N > > + > > + reset-names: > > + items: > > + - const: rst > > + - const: arst > > + - const: prst > > + > > + power-domains: > > + maxItems: 1 > > + > > + ports: > > + $ref: /schemas/graph.yaml#/properties/ports > > + > > + properties: > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: Parallel input port > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/$defs/port-base > > + unevaluatedProperties: false > > + description: DSI output port > > + > > + properties: > > + endpoint: > > + $ref: /schemas/media/video-interfaces.yaml# > > + unevaluatedProperties: false > > + > > + properties: > > + data-lanes: > > + minItems: 1 > > + maxItems: 4 > > You should specify the acceptable values, especially given that the > hardware doesn't seem to support lane reordering. OK. > > > + > > + required: > > + - data-lanes > > + > > + required: > > + - port@0 > > + - port@1 > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - interrupt-names > > + - clocks > > + - clock-names > > + - resets > > + - reset-names > > + - power-domains > > + - ports > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/clock/r9a07g044-cpg.h> > > Could you please swap those two lines to get them sorted alphabetically ? OK. Cheers, Biju > > With these comments addressed, > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > + > > + dsi0: dsi@10850000 { > > + compatible = "renesas,rzg2l-mipi-dsi"; > > + reg = <0x10850000 0x20000>; > > + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "seq0", "seq1", "vin1", "rcv", > > + "ferr", "ppi", "debug"; > > + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, > > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, > > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, > > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, > > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, > > + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; > > + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", > "lpclk"; > > + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, > > + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, > > + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; > > + reset-names = "rst", "arst", "prst"; > > + power-domains = <&cpg>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dsi0_in: endpoint { > > + remote-endpoint = <&du_out_dsi0>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + dsi0_out: endpoint { > > + data-lanes = <1 2 3 4>; > > + remote-endpoint = <&adv7535_in>; > > + }; > > + }; > > + }; > > + }; > > +... > > -- > Regards, > > Laurent Pinchart ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings 2022-03-28 6:49 ` [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings Biju Das 2022-04-01 0:38 ` Rob Herring 2022-04-15 10:16 ` Laurent Pinchart @ 2022-04-19 8:56 ` Geert Uytterhoeven 2022-04-19 14:53 ` Biju Das 2 siblings, 1 reply; 6+ messages in thread From: Geert Uytterhoeven @ 2022-04-19 8:56 UTC (permalink / raw) To: Biju Das Cc: David Airlie, Daniel Vetter, Rob Herring, DRI Development, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Geert Uytterhoeven, Chris Paterson, Biju Das, Prabhakar Mahadev Lad, Linux-Renesas Hi Biju, On Mon, Mar 28, 2022 at 8:49 AM Biju Das <biju.das.jz@bp.renesas.com> wrote: > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It > can operate in DSI mode, with up to four data lanes. > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Thanks for your patch! > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml > @@ -0,0 +1,175 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas RZ/G2L MIPI DSI Encoder > + > +maintainers: > + - Biju Das <biju.das.jz@bp.renesas.com> > + > +description: | > + This binding describes the MIPI DSI encoder embedded in the Renesas > + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with > + up to four data lanes. > + > +allOf: > + - $ref: /schemas/display/dsi-controller.yaml# > + > +properties: > + compatible: > + enum: > + - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L Do you want to define SoC-specific compatible values, or can the IP revision be read from the hardware? The rest LGTM (I'm no MIPI-DSI expert), so Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings 2022-04-19 8:56 ` Geert Uytterhoeven @ 2022-04-19 14:53 ` Biju Das 0 siblings, 0 replies; 6+ messages in thread From: Biju Das @ 2022-04-19 14:53 UTC (permalink / raw) To: Geert Uytterhoeven Cc: David Airlie, Daniel Vetter, Rob Herring, DRI Development, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Geert Uytterhoeven, Chris Paterson, Biju Das, Prabhakar Mahadev Lad, Linux-Renesas Hi Geert, Thanks for the feedback. > Subject: Re: [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L > MIPI DSI TX bindings > > Hi Biju, > > On Mon, Mar 28, 2022 at 8:49 AM Biju Das <biju.das.jz@bp.renesas.com> > wrote: > > The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. > > It can operate in DSI mode, with up to four data lanes. > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > > Thanks for your patch! > > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yam > > +++ l > > @@ -0,0 +1,175 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > + > > +title: Renesas RZ/G2L MIPI DSI Encoder > > + > > +maintainers: > > + - Biju Das <biju.das.jz@bp.renesas.com> > > + > > +description: | > > + This binding describes the MIPI DSI encoder embedded in the Renesas > > + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, > > +with > > + up to four data lanes. > > + > > +allOf: > > + - $ref: /schemas/display/dsi-controller.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - renesas,rzg2l-mipi-dsi # RZ/G2L and RZ/V2L > > Do you want to define SoC-specific compatible values, or can the IP > revision be read from the hardware? There is no IP revision register for DSI. "rzg2l-mipi-dsi" is generic Compatible for both RZ/G2L and RZ/V2L. So I can add SoC compatible for both these SoC's along with generic one. Regards, Biju > > The rest LGTM (I'm no MIPI-DSI expert), so > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux- > m68k.org > > In personal conversations with technical people, I call myself a hacker. > But when I'm talking to journalists I just say "programmer" or something > like that. > -- Linus Torvalds ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-04-19 14:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20220328064931.11612-1-biju.das.jz@bp.renesas.com>
2022-03-28 6:49 ` [PATCH v2 1/2] dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings Biju Das
2022-04-01 0:38 ` Rob Herring
2022-04-15 10:16 ` Laurent Pinchart
2022-04-18 19:48 ` Biju Das
2022-04-19 8:56 ` Geert Uytterhoeven
2022-04-19 14:53 ` Biju Das
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).