* [PATCH] mips: dts: ingenic: x1000: Add PWM device tree node @ 2022-04-11 10:01 Aidan MacDonald 2022-04-11 12:41 ` Zhou Yanjie 0 siblings, 1 reply; 4+ messages in thread From: Aidan MacDonald @ 2022-04-11 10:01 UTC (permalink / raw) To: robh+dt, krzk+dt; +Cc: paul, linux-mips, devicetree, linux-kernel Copied from the jz4740 devicetree and trimmed to 5 timers, which is what the hardware supports. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- arch/mips/boot/dts/ingenic/x1000.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi index 8bd27edef216..0dcf37527c8e 100644 --- a/arch/mips/boot/dts/ingenic/x1000.dtsi +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi @@ -127,6 +127,19 @@ wdt: watchdog@0 { clocks = <&tcu TCU_CLK_WDT>; clock-names = "wdt"; }; + + pwm: pwm@40 { + compatible = "ingenic,x1000-pwm"; + reg = <0x40 0x80>; + + #pwm-cells = <3>; + + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, + <&tcu TCU_CLK_TIMER4>; + clock-names = "timer0", "timer1", "timer2", + "timer3", "timer4"; + }; }; rtc: rtc@10003000 { -- 2.35.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] mips: dts: ingenic: x1000: Add PWM device tree node 2022-04-11 10:01 [PATCH] mips: dts: ingenic: x1000: Add PWM device tree node Aidan MacDonald @ 2022-04-11 12:41 ` Zhou Yanjie 2022-04-11 15:47 ` Aidan MacDonald 0 siblings, 1 reply; 4+ messages in thread From: Zhou Yanjie @ 2022-04-11 12:41 UTC (permalink / raw) To: Aidan MacDonald, robh+dt, krzk+dt Cc: paul, linux-mips, devicetree, linux-kernel Hi Aidan, On 2022/4/11 下午6:01, Aidan MacDonald wrote: > Copied from the jz4740 devicetree and trimmed to 5 timers, which > is what the hardware supports. > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- > arch/mips/boot/dts/ingenic/x1000.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi > index 8bd27edef216..0dcf37527c8e 100644 > --- a/arch/mips/boot/dts/ingenic/x1000.dtsi > +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi > @@ -127,6 +127,19 @@ wdt: watchdog@0 { > clocks = <&tcu TCU_CLK_WDT>; > clock-names = "wdt"; > }; > + > + pwm: pwm@40 { > + compatible = "ingenic,x1000-pwm"; > + reg = <0x40 0x80>; It seems more reasonable to use "reg = <0x40 0x80>" since the X1000 has only 5 PWM channels. > + > + #pwm-cells = <3>; > + > + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, > + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, > + <&tcu TCU_CLK_TIMER4>; > + clock-names = "timer0", "timer1", "timer2", > + "timer3", "timer4"; One line is now allowed to hold at most 100 characters, so it is possible to use only one line like: clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; to reduce the number of lines in the dtsi file. Thanks and best regards! > + }; > }; > > rtc: rtc@10003000 { ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mips: dts: ingenic: x1000: Add PWM device tree node 2022-04-11 12:41 ` Zhou Yanjie @ 2022-04-11 15:47 ` Aidan MacDonald 2022-04-11 16:08 ` Zhou Yanjie 0 siblings, 1 reply; 4+ messages in thread From: Aidan MacDonald @ 2022-04-11 15:47 UTC (permalink / raw) To: Zhou Yanjie; +Cc: devicetree, krzk+dt, linux-kernel, linux-mips, paul, robh+dt On Mon, Apr 11, 2022 at 08:41:26PM +0800, Zhou Yanjie wrote: > Hi Aidan, > > On 2022/4/11 下午6:01, Aidan MacDonald wrote: > > Copied from the jz4740 devicetree and trimmed to 5 timers, which > > is what the hardware supports. > > > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > > --- > > arch/mips/boot/dts/ingenic/x1000.dtsi | 13 +++++++++++++ > > 1 file changed, 13 insertions(+) > > > > diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi > > index 8bd27edef216..0dcf37527c8e 100644 > > --- a/arch/mips/boot/dts/ingenic/x1000.dtsi > > +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi > > @@ -127,6 +127,19 @@ wdt: watchdog@0 { > > clocks = <&tcu TCU_CLK_WDT>; > > clock-names = "wdt"; > > }; > > + > > + pwm: pwm@40 { > > + compatible = "ingenic,x1000-pwm"; > > + reg = <0x40 0x80>; > > > It seems more reasonable to use "reg = <0x40 0x80>" since the > X1000 has only 5 PWM channels. I think you mean "reg = <0x40 0x60>" but I'll do that, thanks! > > + > > + #pwm-cells = <3>; > > + > > + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, > > + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, > > + <&tcu TCU_CLK_TIMER4>; > > + clock-names = "timer0", "timer1", "timer2", > > + "timer3", "timer4"; > > > One line is now allowed to hold at most 100 characters, > so it is possible to use only one line like: > > clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; > > to reduce the number of lines in the dtsi file. Sounds good to me. > > > Thanks and best regards! > > > > + }; > > }; > > > > rtc: rtc@10003000 { Regards, Aidan ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] mips: dts: ingenic: x1000: Add PWM device tree node 2022-04-11 15:47 ` Aidan MacDonald @ 2022-04-11 16:08 ` Zhou Yanjie 0 siblings, 0 replies; 4+ messages in thread From: Zhou Yanjie @ 2022-04-11 16:08 UTC (permalink / raw) To: Aidan MacDonald Cc: devicetree, krzk+dt, linux-kernel, linux-mips, paul, robh+dt Hi Aidan, On 2022/4/11 下午11:47, Aidan MacDonald wrote: > On Mon, Apr 11, 2022 at 08:41:26PM +0800, Zhou Yanjie wrote: >> Hi Aidan, >> >> On 2022/4/11 下午6:01, Aidan MacDonald wrote: >>> Copied from the jz4740 devicetree and trimmed to 5 timers, which >>> is what the hardware supports. >>> >>> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> >>> --- >>> arch/mips/boot/dts/ingenic/x1000.dtsi | 13 +++++++++++++ >>> 1 file changed, 13 insertions(+) >>> >>> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi >>> index 8bd27edef216..0dcf37527c8e 100644 >>> --- a/arch/mips/boot/dts/ingenic/x1000.dtsi >>> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi >>> @@ -127,6 +127,19 @@ wdt: watchdog@0 { >>> clocks = <&tcu TCU_CLK_WDT>; >>> clock-names = "wdt"; >>> }; >>> + >>> + pwm: pwm@40 { >>> + compatible = "ingenic,x1000-pwm"; >>> + reg = <0x40 0x80>; >> >> It seems more reasonable to use "reg = <0x40 0x80>" since the >> X1000 has only 5 PWM channels. > I think you mean "reg = <0x40 0x60>" but I'll do that, thanks! Ah, yes, what a what a stupid mistake... :( > >>> + >>> + #pwm-cells = <3>; >>> + >>> + clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, >>> + <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, >>> + <&tcu TCU_CLK_TIMER4>; >>> + clock-names = "timer0", "timer1", "timer2", >>> + "timer3", "timer4"; >> >> One line is now allowed to hold at most 100 characters, >> so it is possible to use only one line like: >> >> clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; >> >> to reduce the number of lines in the dtsi file. > Sounds good to me. > >> >> Thanks and best regards! >> >> >>> + }; >>> }; >>> >>> rtc: rtc@10003000 { > Regards, > Aidan ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-04-11 16:08 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-04-11 10:01 [PATCH] mips: dts: ingenic: x1000: Add PWM device tree node Aidan MacDonald 2022-04-11 12:41 ` Zhou Yanjie 2022-04-11 15:47 ` Aidan MacDonald 2022-04-11 16:08 ` Zhou Yanjie
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).