From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: agross@kernel.org, robh+dt@kernel.org, krzk+dt@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
dmitry.baryshkov@linaro.org, jonathan@marek.ca, hfink@snap.com,
jgrahsl@snap.com
Subject: Re: [PATCH 2/4] arm64: dts: qcom: sm8250: camss: Add CAMSS block definition
Date: Mon, 11 Apr 2022 21:07:27 -0500 [thread overview]
Message-ID: <YlTe3/RSGwMNuwOJ@builder.lan> (raw)
In-Reply-To: <20220409164556.2832782-3-bryan.odonoghue@linaro.org>
On Sat 09 Apr 11:45 CDT 2022, Bryan O'Donoghue wrote:
> Adds a CAMSS definition block.
>
> Co-developed-by: Julian Grahsl <jgrahsl@snap.com>
> Signed-off-by: Julian Grahsl <jgrahsl@snap.com>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 153 +++++++++++++++++++++++++++
> 1 file changed, 153 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 906bc8ed25b7..3d6c617de045 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3150,6 +3150,159 @@ videocc: clock-controller@abf0000 {
> #power-domain-cells = <1>;
> };
>
> + camss: camss@ac6a000 {
> + compatible = "qcom,sm8250-camss";
> + status = "disabled";
> +
> + reg = <0 0xac6a000 0 0x2000>,
> + <0 0xac6c000 0 0x2000>,
> + <0 0xac6e000 0 0x1000>,
> + <0 0xac70000 0 0x1000>,
> + <0 0xac72000 0 0x1000>,
> + <0 0xac74000 0 0x1000>,
> + <0 0xacb4000 0 0xd000>,
> + <0 0xacc3000 0 0xd000>,
> + <0 0xacd9000 0 0x2200>,
> + <0 0xacdb200 0 0x2200>;
> + reg-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "vfe0",
> + "vfe1",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + power-domains = <&camcc IFE_0_GDSC>,
> + <&camcc IFE_1_GDSC>,
> + <&camcc TITAN_TOP_GDSC>;
> +
> + clocks = <&gcc GCC_CAMERA_AHB_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&gcc GCC_CAMERA_SF_AXI_CLK>,
> + <&camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
> + <&camcc CAM_CC_CORE_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY1_CLK>,
> + <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY2_CLK>,
> + <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY3_CLK>,
> + <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY5_CLK>,
> + <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
> + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
> + <&camcc CAM_CC_IFE_0_AHB_CLK>,
> + <&camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_0_CSID_CLK>,
> + <&camcc CAM_CC_IFE_0_AREG_CLK>,
> + <&camcc CAM_CC_IFE_1_AHB_CLK>,
> + <&camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&camcc CAM_CC_IFE_1_CLK>,
> + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&camcc CAM_CC_IFE_1_AREG_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
> +
> + clock-names = "cam_ahb_clk",
> + "cam_hf_axi",
> + "cam_sf_axi",
> + "camnoc_axi",
> + "camnoc_axi_src",
> + "core_ahb",
> + "cpas_ahb",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "csiphy5",
> + "csiphy5_timer",
> + "slow_ahb_src",
> + "vfe0_ahb",
> + "vfe0_axi",
> + "vfe0",
> + "vfe0_cphy_rx",
> + "vfe0_csid",
> + "vfe0_areg",
> + "vfe1_ahb",
> + "vfe1_axi",
> + "vfe1",
> + "vfe1_cphy_rx",
> + "vfe1_csid",
> + "vfe1_areg",
> + "vfe_lite_ahb",
> + "vfe_lite_axi",
> + "vfe_lite",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_csid";
> +
> + iommus = <&apps_smmu 0x800 0x400>,
> + <&apps_smmu 0x801 0x400>,
> + <&apps_smmu 0x840 0x400>,
> + <&apps_smmu 0x841 0x400>,
> + <&apps_smmu 0xC00 0x400>,
> + <&apps_smmu 0xC01 0x400>,
> + <&apps_smmu 0xC40 0x400>,
> + <&apps_smmu 0xC41 0x400>;
Please use lower case hex digits in the iommus property as well.
Thanks,
Bjorn
> +
> + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
> + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
> + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
> + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
> + interconnect-names = "cam_ahb",
> + "cam_hf_0_mnoc",
> + "cam_sf_0_mnoc",
> + "cam_sf_icp_mnoc";
> + };
> +
> camcc: clock-controller@ad00000 {
> compatible = "qcom,sm8250-camcc";
> reg = <0 0x0ad00000 0 0x10000>;
> --
> 2.35.1
>
next prev parent reply other threads:[~2022-04-12 2:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-09 16:45 [PATCH 0/4] Add camss to SM8250 dtsi Bryan O'Donoghue
2022-04-09 16:45 ` [PATCH 1/4] arm64: dts: qcom: sm8250: Add camcc DT node Bryan O'Donoghue
2022-04-09 16:45 ` [PATCH 2/4] arm64: dts: qcom: sm8250: camss: Add CAMSS block definition Bryan O'Donoghue
2022-04-12 2:07 ` Bjorn Andersson [this message]
2022-04-09 16:45 ` [PATCH 3/4] arm64: dts: qcom: sm8250: camss: Add downstream camera pin definitions Bryan O'Donoghue
2022-04-12 2:04 ` Bjorn Andersson
2022-04-12 23:50 ` Bryan O'Donoghue
2022-04-09 16:45 ` [PATCH 4/4] arm64: dts: qcom: sm8250: camss: Add CCI definitions Bryan O'Donoghue
2022-04-12 2:06 ` Bjorn Andersson
2022-04-12 23:58 ` Bryan O'Donoghue
2022-04-13 1:08 ` Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YlTe3/RSGwMNuwOJ@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=hfink@snap.com \
--cc=jgrahsl@snap.com \
--cc=jonathan@marek.ca \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).