devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Kartik <kkartik@nvidia.com>
Cc: daniel.lezcano@linaro.org, tglx@linutronix.de,
	krzk+dt@kernel.org, thierry.reding@gmail.com,
	jonathanh@nvidia.com, spujar@nvidia.com, akhilrajeev@nvidia.com,
	rgumasta@nvidia.com, pshete@nvidia.com, vidyas@nvidia.com,
	mperttunen@nvidia.com, mkumard@nvidia.com,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-tegra@vger.kernel.org
Subject: Re: [PATCH 1/6] dt-bindings: timer: Add Tegra186 & Tegra234 Timer
Date: Thu, 14 Apr 2022 13:20:49 -0500	[thread overview]
Message-ID: <YlhmAQsZVU92OZ3W@robh.at.kernel.org> (raw)
In-Reply-To: <1649924738-17990-2-git-send-email-kkartik@nvidia.com>

On Thu, Apr 14, 2022 at 01:55:33PM +0530, Kartik wrote:
> The Tegra186 timer provides ten 29-bit timer counters and one 32-bit
> timestamp counter. The Tegra234 timer provides sixteen 29-bit timer
> counters and one 32-bit timestamp counter. Each NV timer selects its
> timing reference signal from the 1 MHz reference generated by USEC,
> TSC or either clk_m or OSC. Each TMR can be programmed to generate
> one-shot, periodic, or watchdog interrupts.
> 
> Signed-off-by: Kartik <kkartik@nvidia.com>

Full name please.

> ---
>  .../bindings/timer/nvidia,tegra186-timer.yaml | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> new file mode 100644
> index 000000000000..7841a68d19f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: NVIDIA Tegra186 timer
> +
> +maintainers:
> +  - Thierry Reding <treding@nvidia.com>
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: nvidia,tegra186-timer
> +    then:
> +      properties:
> +        interrupts:
> +          # Either a single combined interrupt or up to 14 individual interrupts

This can be part of 'description'

> +          minItems: 1
> +          maxItems: 10
> +          description: >
> +            A list of 10 interrupts; one per each timer channels 0 through 9.

Is it 10 or 14? I'm confused.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: nvidia,tegra234-timer
> +    then:
> +      properties:
> +        interrupts:
> +          # Either a single combined interrupt or up to 16 individual interrupts
> +          minItems: 1
> +          maxItems: 16
> +          description: >
> +            A list of 16 interrupts; one per each timer channels 0 through 15.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: nvidia,tegra186-timer
> +        description: >
> +          The Tegra186 timer provides ten 29-bit timer counters and one 32-bit
> +          timestamp counter. Each NV timer selects its timing reference signal
> +          from the 1 MHz reference generated by USEC, TSC or either clk_m or
> +          OSC. Each TMR can be programmed to generate one-shot, periodic, or
> +          watchdog interrupts.
> +      - const: nvidia,tegra234-timer
> +        description: >
> +          The Tegra234 timer provides sixteen 29-bit timer counters and one 32-bit
> +          timestamp counter. Each NV timer selects its timing reference signal
> +          from the 1 MHz reference generated by USEC, TSC or either clk_m or
> +          OSC. Each TMR can be programmed to generate one-shot, periodic, or
> +          watchdog interrupts.

Move all this description to top-level description leaving out the exact 
number of counters (as the schema defines that).

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    timer@3010000 {
> +        compatible = "nvidia,tegra186-timer";
> +        reg = <0x03010000 0x000e0000>;
> +        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +        status = "disabled";

Drop status.

> +    };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    timer@2080000 {
> +        compatible = "nvidia,tegra234-timer";
> +        reg = <0x02080000 0x00121000>;
> +        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> +        status = "disabled";
> +    };
> -- 
> 2.17.1
> 
> 

  reply	other threads:[~2022-04-14 18:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-14  8:25 [PATCH 0/6] Add watchdog timer support for Tegra186/194/234 SoCs Kartik
2022-04-14  8:25 ` [PATCH 1/6] dt-bindings: timer: Add Tegra186 & Tegra234 Timer Kartik
2022-04-14 18:20   ` Rob Herring [this message]
2022-04-20 13:14     ` Kartik
2022-04-14  8:25 ` [PATCH 2/6] clocksource: Add Tegra186 timers support Kartik
2022-04-14  8:25 ` [PATCH 3/6] clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC Kartik
2022-04-14  8:25 ` [PATCH 4/6] arm64: tegra: Enable native timers on Tegra186 Kartik
2022-04-14  8:25 ` [PATCH 5/6] arm64: tegra: Enable native timers on Tegra194 Kartik
2022-04-14  8:25 ` [PATCH 6/6] arm64: tegra: Enable native timers on Tegra234 Kartik
2022-06-20 15:45 ` [PATCH 0/6] Add watchdog timer support for Tegra186/194/234 SoCs Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YlhmAQsZVU92OZ3W@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=akhilrajeev@nvidia.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=kkartik@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mkumard@nvidia.com \
    --cc=mperttunen@nvidia.com \
    --cc=pshete@nvidia.com \
    --cc=rgumasta@nvidia.com \
    --cc=spujar@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).