Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL ADC

[Rob Herring <robh@kernel.org>]

On Tue, May 10, 2022 at 05:54:59AM +0000, Biju Das wrote:
> Hi Geert,
> 
> Thanks for the feedback.
> 
> > Subject: Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas RZ/G2UL
> > ADC
> > 
> > Hi Biju,
> > 
> > On Fri, May 6, 2022 at 10:40 AM Biju Das <biju.das.jz@bp.renesas.com>
> > wrote:
> > > > Subject: Re: [PATCH v2 1/2] dt-bindings: iio: adc: Document Renesas
> > > > RZ/G2UL On Thu, May 5, 2022 at 8:40 PM Biju Das
> > <biju.das.jz@bp.renesas.com> wrote:
> > > > > Document Renesas RZ/G2UL ADC bindings. RZ/G2UL ADC is almost
> > > > > identical to RZ/G2L, but it has 2 analog input channels compared
> > > > > to 8 channels on the RZ/G2L.
> > > > >
> > > > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> > 
> > > > > ---
> > > > > a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > > > > +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.
> > > > > +++ yaml
> > > > > @@ -74,18 +75,48 @@ patternProperties:
> > > > >        Represents the external channels which are connected to the
> > ADC.
> > > > >
> > > > >      properties:
> > > > > -      reg:
> > > > > -        description: |
> > > > > -          The channel number. It can have up to 8 channels numbered
> > from
> > > > 0 to 7.
> > > > > -        items:
> > > > > -          - minimum: 0
> > > > > -            maximum: 7
> > > > > -
> > > > > +      reg: true
> > > > >      required:
> > > > >        - reg
> > > > >
> > > > >      additionalProperties: false
> > > > >
> > > > > +allOf:
> > > > > +  - if:
> > > > > +      properties:
> > > > > +        compatible:
> > > > > +          contains:
> > > > > +            const: renesas,r9a07g043-adc
> > > > > +    then:
> > > > > +      patternProperties:
> > > > > +        "^channel@[0-7]$":
> > > >
> > > > [0-1]
> > >
> > > Looks like with this change, validation doesn't work as expected.
> > 
> > OK, keep it at [0-7].
> 
> OK.
> 
> > 
> > > > > +          type: object
> > > > > +          properties:
> > > > > +            reg:
> > > > > +              description: |
> > > > > +                The channel number. It can have up to 2 channels
> > > > numbered from 0 to 1.
> > > > > +              items:
> > > > > +                - minimum: 0
> > > > > +                  maximum: 1
> > > > > +  - if:
> > > > > +      properties:
> > > > > +        compatible:
> > > > > +          contains:
> > > > > +            enum:
> > > > > +              - renesas,r9a07g044-adc
> > > > > +              - renesas,r9a07g054-adc
> > > > > +    then:
> > > > > +      patternProperties:
> > > > > +        "^channel@[0-7]$":
> > > > > +          type: object
> > > > > +          properties:
> > > > > +            reg:
> > > > > +              description: |
> > > > > +                The channel number. It can have up to 8 channels
> > > > numbered from 0 to 7.
> > > > > +              items:
> > > > > +                - minimum: 0
> > > > > +                  maximum: 7
> > > > > +
> > > > >  additionalProperties: false
> > > > >
> > > > >  examples:
> > > >
> > > > The rest LGTM, but I'm wondering if more of the channel subnodes
> > > > description can be factored out to the common part?
> > >
> > > You mean above reg: true?? ie, add as part of the below description??
> > >
> > > type: object
> > >     description: |
> > >       Represents the external channels which are connected to the ADC.
> > 
> > I think I've found a solution while converting the R-Car Gen2 USB PHY
> > bindings.  You can mark channels 3-7 false on RZ/G2UL, cfr. the second
> > channel on RZ/G1C in "[PATCH] dt-bindings:
> 
> I just added similar check for RZ/G2UL by making channel@2-7 false and But dt-binding checks is passing
> with channel@2-7 present in the example. Validation should fail, but it is passing. I will go with current implementation, as it does proper validation.
> 
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        const: renesas,r9a07g043-adc
> +  then:
> +    properties:
> +      channel@2: false
> +      channel@3: false
> +      channel@4: false
> +      channel@5: false
> +      channel@6: false
> +      channel@7: false

patternProperties:
  '^channel@[2-7]$': false

>  
>  additionalProperties: false
>  
> @@ -125,7 +105,7 @@ examples:
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
>      adc: adc@10059000 {
> -      compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
> +      compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
> 
> $ make ARCH=arm64 DT_CHECKER_FLAGS=-m DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml CROSS_COMPILE=~/gcc-arm-10.3-2021.07-x86_64-aarch64-none-linux-gnu/bin/aarch64-none-linux-gnu- dt_binding_check -j8
>   LINT    Documentation/devicetree/bindings
>   DTEX    Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.example.dts
>   CHKDT   Documentation/devicetree/bindings/processed-schema.json
>   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
>   DTC     Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.example.dtb
>   CHECK   Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.example.dtb
> 
> Cheers,
> Biju
> 
>