From: Sam Ravnborg <sam@ravnborg.org>
To: Bastian Krause <bst@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org, kernel@pengutronix.de,
devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
Yannick Fertre <yannick.fertre@st.com>,
Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>
Subject: Re: [PATCH 2/2] drm/panel: simple: add AM-800600P5TMQW-TB8H
Date: Fri, 24 Jun 2022 21:54:57 +0200 [thread overview]
Message-ID: <YrYWkdqZG1sazr2N@ravnborg.org> (raw)
In-Reply-To: <20220610111511.1421067-2-bst@pengutronix.de>
Hi Bastian,
On Fri, Jun 10, 2022 at 01:15:11PM +0200, Bastian Krause wrote:
> Add support for the Ampire AM-800600P5TMQW-TB8H 800x600 panel. Data
> sheet is currently not publicly available, unfortunately.
>
> Signed-off-by: Bastian Krause <bst@pengutronix.de>
Applied to drm-misc (drm-misc-next).
When applying I fixed up the compatible to match the binding.
You may need to fix your DT files if they used the old compatible.
The one from the binding had a dash like similar panels, so that is
the one I picked.
See below for the fix-up.
Sam
> ---
> drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 4a2e580a2f7b7..3a61873dd887c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -778,6 +778,36 @@ static const struct panel_desc ampire_am800480r3tmqwa1h = {
> .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> };
>
> +static const struct display_timing ampire_am800600p5tmqw_tb8h_timing = {
> + .pixelclock = { 34500000, 39600000, 50400000 },
> + .hactive = { 800, 800, 800 },
> + .hfront_porch = { 12, 112, 312 },
> + .hback_porch = { 87, 87, 48 },
> + .hsync_len = { 1, 1, 40 },
> + .vactive = { 600, 600, 600 },
> + .vfront_porch = { 1, 21, 61 },
> + .vback_porch = { 38, 38, 19 },
> + .vsync_len = { 1, 1, 20 },
> + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
> + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
> + DISPLAY_FLAGS_SYNC_POSEDGE,
> +};
> +
> +static const struct panel_desc ampire_am800600p5tmqwtb8h = {
> + .timings = &ire_am800600p5tmqw_tb8h_timing,
> + .num_timings = 1,
> + .bpc = 6,
> + .size = {
> + .width = 162,
> + .height = 122,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> + DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
> + DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> +};
> +
> static const struct display_timing santek_st0700i5y_rbslw_f_timing = {
> .pixelclock = { 26400000, 33300000, 46800000 },
> .hactive = { 800, 800, 800 },
> @@ -3754,6 +3784,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "ampire,am800480r3tmqwa1h",
> .data = &ire_am800480r3tmqwa1h,
> + }, {
> + .compatible = "ampire,am800600p5tmqwtb8h",
was changed to
> + .compatible = "ampire,am800600p5tmqw-tb8h",
> + .data = &ire_am800600p5tmqwtb8h,
> }, {
> .compatible = "arm,rtsm-display",
> .data = &arm_rtsm,
> --
> 2.30.2
>
next prev parent reply other threads:[~2022-06-24 19:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-10 11:15 [PATCH 1/2] dt-bindings: display: simple: add Ampire AM-800600P5TMQW-TB8H panel Bastian Krause
2022-06-10 11:15 ` [PATCH 2/2] drm/panel: simple: add AM-800600P5TMQW-TB8H Bastian Krause
2022-06-24 19:54 ` Sam Ravnborg [this message]
2022-06-27 8:12 ` Bastian Krause
2022-06-16 17:15 ` [PATCH 1/2] dt-bindings: display: simple: add Ampire AM-800600P5TMQW-TB8H panel Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YrYWkdqZG1sazr2N@ravnborg.org \
--to=sam@ravnborg.org \
--cc=airlied@linux.ie \
--cc=bst@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).