From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Cc: agross@kernel.org, robh+dt@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, quic_rohkumar@quicinc.com,
srinivas.kandagatla@linaro.org, dianders@chromium.org,
swboyd@chromium.org, judyhsiao@chromium.org
Subject: Re: [PATCH v14 00/12] Add soundcard support for sc7280 based platforms.
Date: Thu, 7 Jul 2022 10:28:45 -0500 [thread overview]
Message-ID: <Ysb7rZ4tIpN9fm8w@builder.lan> (raw)
In-Reply-To: <1657200184-29565-1-git-send-email-quic_srivasam@quicinc.com>
On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote:
> This patch set is to add bolero digital macros, WCD and maxim codecs nodes
> for audio on sc7280 based platforms.
>
> This patch set depends on:
> [LPASS DTS: wcd related pinmux reorg]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
> [Clock DTS: reset control changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
> [Clock: External MCLK and reset control driver changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
As far as I understand I can't apply this series until Taniya's clock
patches has been picked up?
> [Clock DTS: lpasscc node disable and lpasscore node name changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
You're the author of these 3 other patch sets, so why are you asking me
to stitch them together, instead of just sending me one series that I
can easily apply.
If you want your patches merged, make it easy for the maintainer to
merge them!
Regards,
Bjorn
>
> Changes Since V13:
> -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches.
> -- Remove redundant output high setting in wcd reset node.
> -- Revert external mclk name.
> -- Update dependency list.
> -- Rebase as per latest kernel repository.
> Changes Since V12:
> -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches.
> -- Update external mclk0 name and it's source node.
> -- Move sound node to separate wcd specific dtsi file.
> -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file.
> -- Update dependency list.
> Changes Since V11:
> -- Remove output-low pinconf setting in wcd-reset-n-sleep node.
> -- Update dependency list.
> Changes Since V10:
> -- Modify digital macro codecs pin control labels.
> -- Updated dependency list.
> Changes Since V9:
> -- Move wcd codec and digital codec nodes to sc7280-qcard file.
> -- Modify the reg property as per link number in sound node.
> -- Fix the us-euro pin control usage in wcd codec node.
> -- Move wcd pin control nodes to specific crd board files.
> -- Sort max98360a codec node in alphabetical order.
> -- Modify the commit messages.
> Changes Since V8:
> -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
> -- Add corresponding dt nodes for herobrine crd boards.
> -- Update dai-link node names as per dt-bindings in sound node.
> -- Add reg property in sound node as per dt-bindings which was removed in previous series.
> -- Fix typo errors.
> -- Update wcd codec pin control properties in board specific files.
> Changes Since V7:
> -- Remove redundant interrupt names in soundwire node.
> -- Fix typo errors.
> -- Remove redundant reg property in sound node.
> -- Rebased on top of latest kernel tip.
> Changes Since V6:
> -- Modify link-names and audio routing in a sound node.
> -- Move amp_en pin control node to appropriate consumer patch.
> -- Split patches as per digital macro codecs and board specific codecs and sort it.
> -- Modify label and node names to lpass specific.
> Changes Since V5:
> -- Move soc specific bolero digital codec nodes to soc specific file.
> -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
> -- Change node name and remove redundant status property in sound node.
> Changes Since V4:
> -- Update nodes in sorting order.
> -- Update DTS node names as per dt-bindings.
> -- Update Node properties in proper order.
> -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
> -- Remove redundant labels.
> -- Remove unused size cells and address cells in tx macro node.
> -- Keep all same nodes at one place, which are defined in same file.
> -- Add max98360a codec node to herobrine board specific targets.
> Changes Since V3:
> -- Move digital codec macro nodes to board specific dtsi file.
> -- Update pin controls in lpass cpu node.
> -- Update dependency patch list.
> -- Create patches on latest kernel.
> Changes Since V2:
> -- Add power domains to digital codec macro nodes.
> -- Change clock node usage in lpass cpu node.
> -- Add codec mem clock to lpass cpu node.
> -- Modify the node names to be generic.
> -- Move sound and codec nodes to root node.
> -- sort dai links as per reg.
> -- Fix typo errors.
> Changes Since V1:
> -- Update the commit message of cpu node patch.
> -- Add gpio control property to support Euro headset in wcd938x node.
> -- Fix clock properties in lpass cpu and digital codec macro node.
>
> Srinivasa Rao Mandadapu (12):
> arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
> macro codecs
> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
> 1.0/2.0 and IDP boards
> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
> 3.0/3.1
> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and
> IDP boards
> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
> arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP
> boards
> arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
> arm64: dts: qcom: sc7280: Add lpass cpu node
> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and
> IDP boards.
> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
> arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP
> boards
> arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
>
> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++
> .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
> 6 files changed, 679 insertions(+)
>
> --
> 2.7.4
>
next prev parent reply other threads:[~2022-07-07 15:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 15:28 ` Bjorn Andersson [this message]
2022-07-08 4:03 ` [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-09-13 15:04 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Ysb7rZ4tIpN9fm8w@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=judyhsiao@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_rohkumar@quicinc.com \
--cc=quic_srivasam@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).