From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 38569C433FE for ; Thu, 29 Sep 2022 17:54:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234827AbiI2Rx7 (ORCPT ); Thu, 29 Sep 2022 13:53:59 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47760 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234542AbiI2Rx6 (ORCPT ); Thu, 29 Sep 2022 13:53:58 -0400 Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 603D3151022; Thu, 29 Sep 2022 10:53:56 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id 58E91620CC; Thu, 29 Sep 2022 17:53:55 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 88C9BC433D6; Thu, 29 Sep 2022 17:53:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1664474034; bh=hqNGIz74XJALiZdC92LkHNf7maYmO1ePAPxXD39SbiE=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=GmbncH0j0qPxY/oBF2IfwYY8fXJR6hbKUaWHCKYnDAvM3G5YOOTx+IPJa2za6cok3 QZlEhu29y3UNewBiEUugLbmWG55IOthtcukZcZmt14TXKLG/3Tnie8YZ+O2MMDNzrh 1S+177buqBIO//l2zW0ojBVUZnNXKkXr1jVk6ciaSXZYm/fxKqrZFSJjMdN6EcybeF 7hHypvija+A2Gn5TLv+MT2tQHsFqk9zZZZOnphW7UhbUGHIlSKmMzqikpld/JpvZbf tQx1PmAx+wpzDzN4NwWiuu/2jdU3KgF0PH90KgHHQ7ZazYGT8HmQDns1KsY+SZneng m77XV6uTVmWZA== Date: Thu, 29 Sep 2022 18:53:49 +0100 From: Lee Jones To: Biju Das Cc: Rob Herring , Krzysztof Kozlowski , devicetree@vger.kernel.org, Geert Uytterhoeven , Chris Paterson , Biju Das , Prabhakar Mahadev Lad , linux-renesas-soc@vger.kernel.org Subject: Re: [PATCH RFC 1/7] dt-bindings: mfd: Document RZ/G2L MTU3a bindings Message-ID: References: <20220929103043.1228235-1-biju.das.jz@bp.renesas.com> <20220929103043.1228235-2-biju.das.jz@bp.renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20220929103043.1228235-2-biju.das.jz@bp.renesas.com> Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Thu, 29 Sep 2022, Biju Das wrote: > The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in > the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer > channels and one 32-bit timer channel. It supports the following > functions > - Counter > - Timer > - PWM > > Signed-off-by: Biju Das > --- > It is same as [1]. Just sending this patch to avoid any bot error for > the subsequent patches. > [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220926132114.60396-3-biju.das.jz@bp.renesas.com/ > --- > .../bindings/mfd/renesas,rzg2l-mtu3.yaml | 275 ++++++++++++++++++ > 1 file changed, 275 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml b/Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml > new file mode 100644 > index 000000000000..c1fae8e8d9f9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/renesas,rzg2l-mtu3.yaml > @@ -0,0 +1,275 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/renesas,rzg2l-mtu3.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a) bindings > + > +maintainers: > + - Biju Das > + > +description: | > + This hardware block pconsisting of eight 16-bit timer channels and one > + 32- bit timer channel. It supports the following specifications: > + - Pulse input/output: 28 lines max. > + - Pulse input 3 lines > + - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks > + for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination > + (when LWA = 1)) > + - Operating frequency Up to 100 MHz > + - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8] > + - Waveform output on compare match > + - Input capture function (noise filter setting available) > + - Counter-clearing operation > + - Simultaneous writing to multiple timer counters (TCNT) > + (excluding MTU8). > + - Simultaneous clearing on compare match or input capture > + (excluding MTU8). > + - Simultaneous input and output to registers in synchronization with > + counter operations (excluding MTU8). > + - Up to 12-phase PWM output in combination with synchronous operation > + (excluding MTU8) > + - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] > + - Buffer operation specifiable > + - [MTU1, MTU2] > + - Phase counting mode can be specified independently > + - 32-bit phase counting mode can be specified for interlocked operation > + of MTU1 and MTU2 (when TMDR3.LWA = 1) > + - Cascade connection operation available > + - [MTU3, MTU4, MTU6, and MTU7] > + - Through interlocked operation of MTU3/4 and MTU6/7, the positive and > + negative signals in six phases (12 phases in total) can be output in > + complementary PWM and reset-synchronized PWM operation. > + - In complementary PWM mode, values can be transferred from buffer > + registers to temporary registers at crests and troughs of the timer- > + counter values or when the buffer registers (TGRD registers in MTU4 > + and MTU7) are written to. > + - Double-buffering selectable in complementary PWM mode. > + - [MTU3 and MTU4] > + - Through interlocking with MTU0, a mode for driving AC synchronous > + motors (brushless DC motors) by using complementary PWM output and > + reset-synchronized PWM output is settable and allows the selection > + of two types of waveform output (chopping or level). > + - [MTU5] > + - Capable of operation as a dead-time compensation counter. > + - [MTU0/MTU5, MTU1, MTU2, and MTU8] > + - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and > + through interlocked operation with MTU0/MTU5 and MTU8. > + - Interrupt-skipping function > + - In complementary PWM mode, interrupts on crests and troughs of counter > + values and triggers to start conversion by the A/D converter can be > + skipped. > + - Interrupt sources: 43 sources. > + - Buffer operation: > + - Automatic transfer of register data (transfer from the buffer > + register to the timer register). > + - Trigger generation > + - A/D converter start triggers can be generated > + - A/D converter start request delaying function enables A/D converter > + to be started with any desired timing and to be synchronized with > + PWM output. > + - Low power consumption function > + - The MTU3a can be placed in the module-stop state. > + > +properties: > + compatible: > + items: > + - enum: > + - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} > + - renesas,r9a07g054-mtu3 # RZ/V2L > + - const: renesas,rzg2l-mtu3 > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: MTU0.TGRA input capture/compare match > + - description: MTU0.TGRB input capture/compare match > + - description: MTU0.TGRC input capture/compare match > + - description: MTU0.TGRD input capture/compare match > + - description: MTU0.TCNT overflow > + - description: MTU0.TGRE compare match > + - description: MTU0.TGRF compare match > + - description: MTU1.TGRA input capture/compare match > + - description: MTU1.TGRB input capture/compare match > + - description: MTU1.TCNT overflow > + - description: MTU1.TCNT underflow > + - description: MTU2.TGRA input capture/compare match > + - description: MTU2.TGRB input capture/compare match > + - description: MTU2.TCNT overflow > + - description: MTU2.TCNT underflow > + - description: MTU3.TGRA input capture/compare match > + - description: MTU3.TGRB input capture/compare match > + - description: MTU3.TGRC input capture/compare match > + - description: MTU3.TGRD input capture/compare match > + - description: MTU3.TCNT overflow > + - description: MTU4.TGRA input capture/compare match > + - description: MTU4.TGRB input capture/compare match > + - description: MTU4.TGRC input capture/compare match > + - description: MTU4.TGRD input capture/compare match > + - description: MTU4.TCNT overflow/underflow > + - description: MTU5.TGRU input capture/compare match > + - description: MTU5.TGRV input capture/compare match > + - description: MTU5.TGRW input capture/compare match > + - description: MTU6.TGRA input capture/compare match > + - description: MTU6.TGRB input capture/compare match > + - description: MTU6.TGRC input capture/compare match > + - description: MTU6.TGRD input capture/compare match > + - description: MTU6.TCNT overflow > + - description: MTU7.TGRA input capture/compare match > + - description: MTU7.TGRB input capture/compare match > + - description: MTU7.TGRC input capture/compare match > + - description: MTU7.TGRD input capture/compare match > + - description: MTU7.TCNT overflow/underflow > + - description: MTU8.TGRA input capture/compare match > + - description: MTU8.TGRB input capture/compare match > + - description: MTU8.TGRC input capture/compare match > + - description: MTU8.TGRD input capture/compare match > + - description: MTU8.TCNT overflow > + - description: MTU8.TCNT underflow > + > + interrupt-names: > + items: > + - const: tgia0 > + - const: tgib0 > + - const: tgic0 > + - const: tgid0 > + - const: tgiv0 > + - const: tgie0 > + - const: tgif0 > + - const: tgia1 > + - const: tgib1 > + - const: tgiv1 > + - const: tgiu1 > + - const: tgia2 > + - const: tgib2 > + - const: tgiv2 > + - const: tgiu2 > + - const: tgia3 > + - const: tgib3 > + - const: tgic3 > + - const: tgid3 > + - const: tgiv3 > + - const: tgia4 > + - const: tgib4 > + - const: tgic4 > + - const: tgid4 > + - const: tgiv4 > + - const: tgiu5 > + - const: tgiv5 > + - const: tgiw5 > + - const: tgia6 > + - const: tgib6 > + - const: tgic6 > + - const: tgid6 > + - const: tgiv6 > + - const: tgia7 > + - const: tgib7 > + - const: tgic7 > + - const: tgid7 > + - const: tgiv7 > + - const: tgia8 > + - const: tgib8 > + - const: tgic8 > + - const: tgid8 > + - const: tgiv8 > + - const: tgiu8 > + > + clocks: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + - clocks > + - power-domains > + - resets > + > +additionalProperties: false > + > +examples: > + - | > + #include > + #include > + > + mtu3: timer@10001200 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "renesas,r9a07g044-mtu3", "renesas,rzg2l-mtu3"; > + reg = <0x10001200 0xb00>; > + interrupts = , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + , > + ; > + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0", > + "tgif0", > + "tgia1", "tgib1", "tgiv1", "tgiu1", > + "tgia2", "tgib2", "tgiv2", "tgiu2", > + "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3", > + "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4", > + "tgiu5", "tgiv5", "tgiw5", > + "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6", > + "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7", > + "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8"; Not sure you need to list all of the IRQs in the example. > + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; > + power-domains = <&cpg>; > + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; > + }; > + > +... -- Lee Jones [李琼斯]