Re: [PATCH 1/4] dt-bindings: clock: ti: Convert to yaml

[Sukrut Bellary <sbellary@baylibre.com>]

On Fri, Apr 04, 2025 at 12:44:39PM +0200, Krzysztof Kozlowski wrote:
> On Thu, Apr 03, 2025 at 06:44:57PM GMT, Sukrut Bellary wrote:
> > +properties:
> > +  reg:
> > +    maxItems: 1
> 
> How reg is part of this? Every clock has reg, doesn't it? Otherwise how
> do you control it? Drop.

Thanks for the review.
I will drop.

> > +
> > +  ti,autoidle-shift:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      bit shift of the autoidle enable bit for the clock
> > +    maximum: 31
> > +    default: 0
> > +
> > +  ti,invert-autoidle-bit:
> > +    type: boolean
> > +    description:
> > +      autoidle is enabled by setting the bit to 0
> 
> required:
>   - ti,autoidle-shift
>   - ti,invert-autoidle-bit - although this makes no sense, so probably
> old binding was not correct here

Yes, all clocks don't support autoidle. So, required is not applicable
here.

> > +
> > +additionalProperties: true
> > +
> > +examples:
> > +  - |
> > +    bus {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      clock@1b4 {
> > +        reg = <0x01b4>;
> > +        ti,autoidle-shift = <8>;
> > +        ti,invert-autoidle-bit;
> > +      };
> 
> Drop example, pointless here - noop due to lack of compatible. Instead
> provide complete examples in schemas referencing this.

Ok, will remove from here.

> > +    };
> > -- 
> > 2.34.1
> >