From: Sukrut Bellary <sbellary@baylibre.com>
To: Rob Herring <robh@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Tero Kristo <kristo@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Andreas Kemnade <andreas@kemnade.info>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] dt-bindings: clock: ti: add ti,autoidle.yaml reference
Date: Wed, 9 Apr 2025 01:40:27 -0700 [thread overview]
Message-ID: <Z/Yye/z+g5CZJRzg@dev-linux> (raw)
In-Reply-To: <20250404194206.GA171263-robh@kernel.org>
On Fri, Apr 04, 2025 at 02:42:06PM -0500, Rob Herring wrote:
> On Thu, Apr 03, 2025 at 06:45:00PM -0700, Sukrut Bellary wrote:
> > ti,divider-clock uses properties from ti,autoidle.
> >
> > As we are converting autoidle binding to ti,autoidle.yaml,
> > fix the reference here.
> >
> > Add dual license.
>
> Do you have rights to do so?
I will keep it as is.
May be Andreas can take care of this.
> >
> > Signed-off-by: Sukrut Bellary <sbellary@baylibre.com>
> > ---
> > .../bindings/clock/ti/ti,divider-clock.yaml | 24 ++++---------------
> > 1 file changed, 5 insertions(+), 19 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > index 3fbe236eb565..aba879ae302d 100644
> > --- a/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > +++ b/Documentation/devicetree/bindings/clock/ti/ti,divider-clock.yaml
> > @@ -1,4 +1,4 @@
> > -# SPDX-License-Identifier: GPL-2.0-only
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > %YAML 1.2
> > ---
> > $id: http://devicetree.org/schemas/clock/ti/ti,divider-clock.yaml#
> > @@ -55,9 +55,10 @@ description: |
> > is missing it is the same as supplying a zero shift.
> >
> > This binding can also optionally provide support to the hardware autoidle
> > - feature, see [1].
> > + feature.
> >
> > - [1] Documentation/devicetree/bindings/clock/ti/autoidle.txt
> > +allOf:
> > + - $ref: /schemas/clock/ti/ti,autoidle.yaml#
> >
> > properties:
> > compatible:
> > @@ -97,7 +98,6 @@ properties:
> > minimum: 1
> > default: 1
> >
> > -
> > ti,max-div:
> > $ref: /schemas/types.yaml#/definitions/uint32
> > description:
> > @@ -116,20 +116,6 @@ properties:
> > valid divisor programming must be a power of two,
> > only valid if ti,dividers is not defined.
> >
> > - ti,autoidle-shift:
> > - $ref: /schemas/types.yaml#/definitions/uint32
> > - description:
> > - bit shift of the autoidle enable bit for the clock,
> > - see [1].
> > - maximum: 31
> > - default: 0
> > -
> > - ti,invert-autoidle-bit:
> > - type: boolean
> > - description:
> > - autoidle is enabled by setting the bit to 0,
> > - see [1]
> > -
> > ti,set-rate-parent:
> > type: boolean
> > description:
> > @@ -156,7 +142,7 @@ required:
> > - clocks
> > - reg
> >
> > -additionalProperties: false
> > +unevaluatedProperties: false
> >
> > examples:
> > - |
> > --
> > 2.34.1
> >
next prev parent reply other threads:[~2025-04-09 8:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-04 1:44 [PATCH 0/4] dt-bindings: clock: ti: convert to yaml Sukrut Bellary
2025-04-04 1:44 ` [PATCH 1/4] dt-bindings: clock: ti: Convert " Sukrut Bellary
2025-04-04 10:44 ` Krzysztof Kozlowski
2025-04-05 19:55 ` Andreas Kemnade
2025-04-09 8:11 ` Sukrut Bellary
2025-04-09 7:46 ` Sukrut Bellary
2025-04-04 15:19 ` Rob Herring
2025-04-09 8:21 ` Sukrut Bellary
2025-04-04 1:44 ` [PATCH 2/4] " Sukrut Bellary
2025-04-04 5:51 ` kernel test robot
2025-04-04 10:46 ` Krzysztof Kozlowski
2025-04-09 8:23 ` Sukrut Bellary
2025-04-04 14:56 ` Rob Herring (Arm)
2025-04-09 8:35 ` Sukrut Bellary
2025-04-09 9:10 ` Andreas Kemnade
2025-04-10 17:49 ` Sukrut Bellary
2025-04-04 1:44 ` [PATCH 3/4] dt-bindings: clock: ti: Convert fixed-factor-clock " Sukrut Bellary
2025-04-04 19:40 ` Rob Herring
2025-04-09 8:38 ` Sukrut Bellary
2025-04-04 1:45 ` [PATCH 4/4] dt-bindings: clock: ti: add ti,autoidle.yaml reference Sukrut Bellary
2025-04-04 19:42 ` Rob Herring
2025-04-09 8:40 ` Sukrut Bellary [this message]
2025-04-05 19:49 ` Andreas Kemnade
2025-04-09 8:43 ` Sukrut Bellary
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z/Yye/z+g5CZJRzg@dev-linux \
--to=sbellary@baylibre.com \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).