[PATCH v1 3/3] iio: pressure: bmp280: Make time vars intuitive and move to fsleep

Vasileios Amoiridis
2024-11-28T23:25:10Z

Add time unit abbreviation in the end of the variables to make the names
more intuitive. While at it, move to new fsleep().

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
drivers/iio/pressure/bmp280-core.c | 39 +++++++++++++++---------------
drivers/iio/pressure/bmp280.h | 4 +--
2 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index e5ec8137961f..b39ef30f8eda 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1002,7 +1002,7 @@ static int bmp280_preinit(struct bmp280_data *data)
* after resetting, the device uses the complete power-on sequence so
* it needs to wait for the defined start-up time.
*/
- fsleep(data->start_up_time);
+ fsleep(data->start_up_time_us);

ret = regmap_read(data->regmap, BMP280_REG_STATUS, &reg);
if (ret)
@@ -1161,7 +1161,7 @@ const struct bmp280_chip_info bmp280_chip_info = {
.chip_id = bmp280_chip_ids,
.num_chip_id = ARRAY_SIZE(bmp280_chip_ids),
.regmap_config = &bmp280_regmap_config,
- .start_up_time = 2000,
+ .start_up_time_us = 2000,
.channels = bmp280_channels,
.num_channels = ARRAY_SIZE(bmp280_channels),
.avail_scan_masks = bmp280_avail_scan_masks,
@@ -1347,7 +1347,7 @@ const struct bmp280_chip_info bme280_chip_info = {
.chip_id = bme280_chip_ids,
.num_chip_id = ARRAY_SIZE(bme280_chip_ids),
.regmap_config = &bme280_regmap_config,
- .start_up_time = 2000,
+ .start_up_time_us = 2000,
.channels = bme280_channels,
.num_channels = ARRAY_SIZE(bme280_channels),
.avail_scan_masks = bme280_avail_scan_masks,
@@ -1414,7 +1414,7 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
return ret;
}
/* Wait for 2ms for command to be processed */
- usleep_range(data->start_up_time, data->start_up_time + 100);
+ fsleep(data->start_up_time_us);
/* Check for command processing error */
ret = regmap_read(data->regmap, BMP380_REG_ERROR, &reg);
if (ret) {
@@ -1806,7 +1806,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
* formula in datasheet section 3.9.2 with an offset of ~+15%
* as it seen as well in table 3.9.1.
*/
- msleep(150);
+ fsleep(150 * USEC_PER_MSEC);

/* Check config error flag */
ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);
@@ -1957,7 +1957,7 @@ const struct bmp280_chip_info bmp380_chip_info = {
.num_chip_id = ARRAY_SIZE(bmp380_chip_ids),
.regmap_config = &bmp380_regmap_config,
.spi_read_extra_byte = true,
- .start_up_time = 2000,
+ .start_up_time_us = 2000,
.channels = bmp380_channels,
.num_channels = ARRAY_SIZE(bmp380_channels),
.avail_scan_masks = bmp280_avail_scan_masks,
@@ -2006,7 +2006,8 @@ static int bmp580_soft_reset(struct bmp280_data *data)
dev_err(data->dev, "failed to send reset command to device\n");
return ret;
}
- usleep_range(2000, 2500);
+ /* From datasheet's table 4: electrical characteristics */
+ fsleep(2000);

/* Dummy read of chip_id */
ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, &reg);
@@ -2208,7 +2209,7 @@ static int bmp580_nvmem_read_impl(void *priv, unsigned int offset, void *val,
goto exit;
}
/* Wait standby transition time */
- usleep_range(2500, 3000);
+ fsleep(2500);

while (bytes >= sizeof(*dst)) {
addr = bmp580_nvmem_addrs[offset / sizeof(*dst)];
@@ -2274,7 +2275,7 @@ static int bmp580_nvmem_write_impl(void *priv, unsigned int offset, void *val,
goto exit;
}
/* Wait standby transition time */
- usleep_range(2500, 3000);
+ fsleep(2500);

while (bytes >= sizeof(*buf)) {
addr = bmp580_nvmem_addrs[offset / sizeof(*buf)];
@@ -2458,7 +2459,7 @@ static int bmp580_chip_config(struct bmp280_data *data)
return ret;
}
/* From datasheet's table 4: electrical characteristics */
- usleep_range(2500, 3000);
+ fsleep(2500);

/* Set default DSP mode settings */
reg_val = FIELD_PREP(BMP580_DSP_COMP_MASK, BMP580_DSP_PRESS_TEMP_COMP_EN) |
@@ -2649,7 +2650,7 @@ const struct bmp280_chip_info bmp580_chip_info = {
.chip_id = bmp580_chip_ids,
.num_chip_id = ARRAY_SIZE(bmp580_chip_ids),
.regmap_config = &bmp580_regmap_config,
- .start_up_time = 2000,
+ .start_up_time_us = 2000,
.channels = bmp580_channels,
.num_channels = ARRAY_SIZE(bmp580_channels),
.avail_scan_masks = bmp280_avail_scan_masks,
@@ -2720,7 +2721,7 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
delay_us =
conversion_time_max[data->oversampling_press];

- usleep_range(delay_us, delay_us + 1000);
+ fsleep(delay_us);
}

ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
@@ -2988,7 +2989,7 @@ const struct bmp280_chip_info bmp180_chip_info = {
.chip_id = bmp180_chip_ids,
.num_chip_id = ARRAY_SIZE(bmp180_chip_ids),
.regmap_config = &bmp180_regmap_config,
- .start_up_time = 2000,
+ .start_up_time_us = 2000,
.channels = bmp280_channels,
.num_channels = ARRAY_SIZE(bmp280_channels),
.avail_scan_masks = bmp280_avail_scan_masks,
@@ -3066,7 +3067,7 @@ const struct bmp280_chip_info bmp085_chip_info = {
.chip_id = bmp180_chip_ids,
.num_chip_id = ARRAY_SIZE(bmp180_chip_ids),
.regmap_config = &bmp180_regmap_config,
- .start_up_time = 2000,
+ .start_up_time_us = 2000,
.channels = bmp280_channels,
.num_channels = ARRAY_SIZE(bmp280_channels),
.avail_scan_masks = bmp280_avail_scan_masks,
@@ -3175,7 +3176,7 @@ int bmp280_common_probe(struct device *dev,
data->oversampling_temp = chip_info->oversampling_temp_default;
data->iir_filter_coeff = chip_info->iir_filter_coeff_default;
data->sampling_freq = chip_info->sampling_freq_default;
- data->start_up_time = chip_info->start_up_time;
+ data->start_up_time_us = chip_info->start_up_time_us;

/* Bring up regulators */
regulator_bulk_set_supply_names(data->supplies,
@@ -3201,7 +3202,7 @@ int bmp280_common_probe(struct device *dev,
return ret;

/* Wait to make sure we started up properly */
- usleep_range(data->start_up_time, data->start_up_time + 100);
+ fsleep(data->start_up_time_us);

/* Bring chip out of reset if there is an assigned GPIO line */
gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
@@ -3287,7 +3288,7 @@ int bmp280_common_probe(struct device *dev,
* Set autosuspend to two orders of magnitude larger than the
* start-up time.
*/
- pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
+ pm_runtime_set_autosuspend_delay(dev, data->start_up_time_us / 10);
pm_runtime_use_autosuspend(dev);
pm_runtime_put(dev);

@@ -3306,7 +3307,7 @@ static int bmp280_runtime_suspend(struct device *dev)

data->chip_info->set_mode(data, BMP280_SLEEP);

- fsleep(data->start_up_time);
+ fsleep(data->start_up_time_us);
return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
}

@@ -3320,7 +3321,7 @@ static int bmp280_runtime_resume(struct device *dev)
if (ret)
return ret;

- usleep_range(data->start_up_time, data->start_up_time + 100);
+ fsleep(data->start_up_time_us);

ret = data->chip_info->chip_config(data);
if (ret)
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index a3631bc0e188..5b2ee1d0ee46 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -434,7 +434,7 @@ struct bmp280_data {
struct bmp380_calib bmp380;
} calib;
struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
- unsigned int start_up_time; /* in microseconds */
+ unsigned int start_up_time_us;

/* log of base 2 of oversampling rate */
u8 oversampling_press;
@@ -490,7 +490,7 @@ struct bmp280_chip_info {

const struct iio_chan_spec *channels;
int num_channels;
- unsigned int start_up_time;
+ unsigned int start_up_time_us;
const unsigned long *avail_scan_masks;

const int *oversampling_temp_avail;
--
2.43.0