Re: [PATCH v3 2/2] dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA

[Vinod Koul <vkoul@kernel.org>]

On 27-11-24, 15:46, Vaishnav Achath wrote:
> J722S CSI BCDMA is similar to J721S2 CSI BCDMA but there are slight
> integration differences like different PSIL thread base ID which is
> currently handled in the driver based on udma_of_match data. Add an
> entry to support J722S CSIRX.
> 
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> V2->V3 : Minor edit in commit message.
> 
> V1->V2:
> 	* Add new compatible for J722S instead of modifying AM62A
> 
>  drivers/dma/ti/k3-udma.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
> index b3f27b3f9209..7ed1956b4642 100644
> --- a/drivers/dma/ti/k3-udma.c
> +++ b/drivers/dma/ti/k3-udma.c
> @@ -4404,6 +4404,18 @@ static struct udma_match_data j721s2_bcdma_csi_data = {
>  	.soc_data = &j721s2_bcdma_csi_soc_data,
>  };
>  
> +static struct udma_match_data j722s_bcdma_csi_data = {
> +	.type = DMA_TYPE_BCDMA,
> +	.psil_base = 0x3100,
> +	.enable_memcpy_support = false,
> +	.burst_size = {
> +		TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES, /* Normal Channels */
> +		0, /* No H Channels */
> +		0, /* No UH Channels */

Why are these zeros? we expect valid size...

> +	},
> +	.soc_data = &j721s2_bcdma_csi_soc_data,
> +};
> +
>  static const struct of_device_id udma_of_match[] = {
>  	{
>  		.compatible = "ti,am654-navss-main-udmap",
> @@ -4435,6 +4447,10 @@ static const struct of_device_id udma_of_match[] = {
>  		.compatible = "ti,j721s2-dmss-bcdma-csi",
>  		.data = &j721s2_bcdma_csi_data,
>  	},
> +	{
> +		.compatible = "ti,j722s-dmss-bcdma-csi",
> +		.data = &j722s_bcdma_csi_data,
> +	},
>  	{ /* Sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, udma_of_match);
> -- 
> 2.34.1

-- 
~Vinod