Re: [PATCH 0/5] Add support for RZ/G3E WDT

[Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>]

Hi Biju,

On Wed, Jan 15, 2025 at 10:38:49AM +0000, Biju Das wrote:
> The RZ/G3E WDT IP is similar to RZ/V2H WDT. WDT0 can be used for CM33 cold
> reset, system reset and asserting WDTUDFCM pin where as WDT1 can be used
> for CA55 cold reset, system reset and asserting WDTUDFCA pin. Other 2
> watchdogs can be used for system reset. So define WDT{1..3} in SoC dtsi.

For all the series:
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>

> 
> Biju Das (5):
>   dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
>   clk: renesas: r9a09g047: Add WDT clocks/resets
>   watchdog: Make RZV2HWDT driver depend on ARCH_R9A09G47
>   arm64: dts: renesas: r9a09g047: Add WDT1-WDT3 nodes
>   arm64: dts: renesas: r9a09g047e57-smarc: Enable watchdog
> 
>  .../bindings/watchdog/renesas,wdt.yaml        |  4 +++
>  arch/arm64/boot/dts/renesas/r9a09g047.dtsi    | 30 +++++++++++++++++++
>  .../boot/dts/renesas/r9a09g047e57-smarc.dts   |  4 +++
>  drivers/clk/renesas/r9a09g047-cpg.c           | 15 ++++++++++
>  drivers/watchdog/Kconfig                      |  7 +++--
>  5 files changed, 57 insertions(+), 3 deletions(-)
> 
> -- 
> 2.43.0
> 
> 

Thanks & Regards,
Tommaso