Re: [PATCH v3 13/13] ARM: dts: qcom: msm8226-samsung-matisse-common: Enable modem

[Stephan Gerhold <stephan.gerhold@linaro.org>]

On Mon, Jan 27, 2025 at 11:45:45PM +0100, Luca Weiss wrote:
> From: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> 
> Enable modem remoteproc on samsung,matisse-wifi & matisselte.
> 
> The mattisselte - being msm8926 - requires an extra mss-supply, so add
> that as well.
> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>

Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>

> ---
>  arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi | 7 +++++++
>  arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts      | 4 ++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> index 0a3147656f36ca2616e0e3cc7c1dd808b55f3a88..f1544a7e8369c329360e235c48291a5d4c261fdc 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
> @@ -229,6 +229,13 @@ &blsp1_uart3 {
>  	status = "okay";
>  };
>  
> +&modem {
> +	mx-supply = <&pm8226_l3>;
> +	pll-supply = <&pm8226_l8>;
> +
> +	status = "okay";
> +};
> +
>  &rpm_requests {
>  	regulators {
>  		compatible = "qcom,rpm-pm8226-regulators";
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
> index 772827cad972ad4ff032cfb9310568c5d2f0170f..73e19176eb97af569d99580c6b28fb2e0ec7f1b3 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
> @@ -28,6 +28,10 @@ reg_tsp_3p3v: regulator-tsp-3p3v {
>  	};
>  };
>  
> +&modem {
> +	mss-supply = <&pm8226_s5>;
> +};
> +
>  &tlmm {
>  	tsp_en1_default_state: tsp-en1-default-state {
>  		pins = "gpio32";
> 
> -- 
> 2.48.1
>