Re: [PATCH v1 1/8] MT9M114: Add bypass-pll DT-binding

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Mathis,

Please see which subject prefix has been used in the past for these
bindings.

On Wed, Feb 26, 2025 at 04:39:22PM +0100, Mathis Foerst wrote:
> The MT9M114 sensor has an internal PLL that generates the required SYSCLK
> from EXTCLK. It also has the option to bypass the PLL and use EXTCLK
> directly as SYSCLK.
> The current driver implementation uses a hardcoded PLL configuration that
> requires a specific EXTCLK frequency. Depending on the available clocks,
> it can be desirable to use a different PLL configuration or to bypass it.
> 
> Add the 'bypass-pll' property to the MT9M114 DT-bindings to allow selecting
> the PLL bypass mode.
> 
> Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
> ---
>  Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> index f6b87892068a..72e258d57186 100644
> --- a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> @@ -70,6 +70,10 @@ properties:
>            - bus-type
>            - link-frequencies
>  
> +  onnn,bypass-pll:
> +    description: Bypass the internal PLL of the sensor to use EXTCLK directly as SYSCLK.
> +    type: boolean
> +

But on the content itself: do you need this? Could you instead compare the
external clock frequency to the link-frequencies property value(s)?

>  required:
>    - compatible
>    - reg

-- 
Regards,

Sakari Ailus