[PATCH v2] ARM: dts: vfxxx: Fix the order of the DMA entries

[PATCH v2] ARM: dts: vfxxx: Fix the order of the DMA entries

[Fabio Estevam]

From: Fabio Estevam <festevam@denx.de>

According to fsl,dspi.yaml the expected order for describing the dmas
and dma-names properties is "tx" first, followed by "rx".

Adjust it acordingly to fix the following dt-schema warnings:

spi@4002c000: dma-names:0: 'tx' was expected
spi@4002c000: dma-names:1: 'rx' was expected

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v1:
- Fixed Subject.

 arch/arm/boot/dts/nxp/vf/vfxxx.dtsi | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index 6334ad4aec4b..597f20be82f1 100644
--- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -158,8 +158,8 @@ dspi0: spi@4002c000 {
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <6>;
-				dmas = <&edma1 1 12>, <&edma1 1 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 13>, <&edma1 1 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -172,8 +172,8 @@ dspi1: spi@4002d000 {
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
 				spi-num-chipselects = <4>;
-				dmas = <&edma1 1 14>, <&edma1 1 15>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 1 15>, <&edma1 1 14>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -529,9 +529,8 @@ dspi2: spi@400ac000 {
 				clocks = <&clks VF610_CLK_DSPI2>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 10>,
-					<&edma1 0 11>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 11>, <&edma1 0 10>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -544,8 +543,8 @@ dspi3: spi@400ad000 {
 				clocks = <&clks VF610_CLK_DSPI3>;
 				clock-names = "dspi";
 				spi-num-chipselects = <2>;
-				dmas = <&edma1 0 12>, <&edma1 0 13>;
-				dma-names = "rx", "tx";
+				dmas = <&edma1 0 13>, <&edma1 0 12>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
-- 
2.34.1

Re: [PATCH v2] ARM: dts: vfxxx: Fix the order of the DMA entries

[Shawn Guo]

On Thu, Feb 20, 2025 at 09:48:09AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> According to fsl,dspi.yaml the expected order for describing the dmas
> and dma-names properties is "tx" first, followed by "rx".
> 
> Adjust it acordingly to fix the following dt-schema warnings:
> 
> spi@4002c000: dma-names:0: 'tx' was expected
> spi@4002c000: dma-names:1: 'rx' was expected
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>

Applied, thanks!