From: Drew Fustini <drew@pdp7.com>
To: Michal Wilczynski <m.wilczynski@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
guoren@kernel.org, wefu@redhat.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org,
paul.walmsley@sifive.com, palmer@dabbelt.com,
aou@eecs.berkeley.edu, alex@ghiti.fr, jszhang@kernel.org,
m.szyprowski@samsung.com, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org
Subject: Re: [PATCH v8 0/5] TH1520 SoC: Add AON firmware & power-domain support
Date: Thu, 13 Mar 2025 01:12:00 -0700 [thread overview]
Message-ID: <Z9KTUIix4z7xb/e1@x1> (raw)
In-Reply-To: <4b45236e-8252-4dd5-b3f7-3595b0924182@samsung.com>
On Wed, Mar 12, 2025 at 03:31:04PM +0100, Michal Wilczynski wrote:
>
>
> On 3/12/25 14:40, Ulf Hansson wrote:
> > On Tue, 11 Mar 2025 at 18:20, Michal Wilczynski
> > <m.wilczynski@samsung.com> wrote:
> >>
> >> This patch series introduces and documents power management (PM) support and
> >> the AON firmware driver for the T-Head TH1520 SoC, as used on the LicheePi 4A
> >> board. While part of a larger effort to enable the Imagination BXM-4-64 GPU
> >> upstream, these patches can merge independently.
> >>
> >> Bigger series cover letter:
> >> https://lore.kernel.org/all/20250219140239.1378758-1-m.wilczynski@samsung.com/
> >>
> >> This series is versioned to maintain continuity with the bigger patchset it is
> >> a subseries of. Please find below a changelog for the AON & power-domain:
> >
> > I can pick up patch1 -> patch4 via my pmdomain tree, assuming I can
> > get an ack from some of the thead-SoC maintainers.
> >
> > Patch5 is probably better to be routed through the SoC maintainers
> > tree, but let me know if you prefer me to take this one too.
>
> Thanks, I don't have a preference, I'll leave it up to SoC maintainers.
> I haven't included the device tree changes in this mini-series, as then
> the PM & firmware, clock, and reset mini-series might conflict with each
> other in th1520.dtsi file, but SoC maintainers might also find it useful
> to pick this commit [1], along with the patch5.
>
> [1] - https://lore.kernel.org/all/20250219140239.1378758-20-m.wilczynski@samsung.com/
I applied this series on top of next along with the above dts patch.
The existing functionality of ethernet and emmc continues to work
correctly. I can apply the dts to my for-next tree once this series
lands in next.
root@lpi4amain:/sys/kernel/debug/pm_genpd# cat pm_genpd_summary
domain status children performance
/device runtime status managed by
------------------------------------------------------------------------------
dsp1 off-0 0
dsp0 off-0 0
gpu off-0 0
venc off-0 0
npu off-0 0
vdec off-0 0
Thanks,
Drew
>
> >
> > Kind regards
> > Uffe
> >
> >
> >>
> >> v8:
> >> - add proper cleanup in the th1520_pd_probe()
> >> - add "suppress_bind_attrs = true", since there is no need to unbound the driver
> >> during runtime. This simplifies the code by eliminating the remove function
> >>
> >> v7:
> >> - add '#include <linux/slab.h", due to kernel robot issue
> >>
> >> v6:
> >> - split the firmware & power-domain patches into a separate series
> >>
> >> v5:
> >> - changed the AON driver to be a set of library functions rather than a
> >> standalone driver
> >>
> >> v4:
> >> - added workaround to disable AUDIO power domain to prevent firmware crashes
> >>
> >> v3:
> >> - consolidated device tree representation by merging aon and power-domain nodes
> >> while maintaining separate drivers internally
> >> - power-domain driver is now instantiated from within the aon driver
> >> - fixed optional module dependencies in Kconfig
> >> - added kernel-doc comments for all exported functions
> >> - implemented th1520_aon_remove() to properly clean up mailbox channel
> >> resources
> >>
> >> v2:
> >> - introduced a new firmware driver to manage power-related operations.
> >> - rewrote the power-domain driver to function alongside the firmware driver.
> >> These nodes in the device tree lack direct address spaces, despite
> >> representing HW blocks. Control is achieved via firmware protocol messages
> >> transmitted through a mailbox to the E902 core.
> >> - added new dt-bindings for power and firmware nodes.
> >> - ran dtbs_check and dt_binding_check to ensure compliance.
> >>
> >> Michal Wilczynski (5):
> >> dt-bindings: firmware: thead,th1520: Add support for firmware node
> >> firmware: thead: Add AON firmware protocol driver
> >> dt-bindings: power: Add TH1520 SoC power domains
> >> pmdomain: thead: Add power-domain driver for TH1520
> >> riscv: Enable PM_GENERIC_DOMAINS for T-Head SoCs
> >>
> >> .../bindings/firmware/thead,th1520-aon.yaml | 53 ++++
> >> MAINTAINERS | 5 +
> >> arch/riscv/Kconfig.socs | 1 +
> >> drivers/firmware/Kconfig | 9 +
> >> drivers/firmware/Makefile | 1 +
> >> drivers/firmware/thead,th1520-aon.c | 248 ++++++++++++++++++
> >> drivers/pmdomain/Kconfig | 1 +
> >> drivers/pmdomain/Makefile | 1 +
> >> drivers/pmdomain/thead/Kconfig | 12 +
> >> drivers/pmdomain/thead/Makefile | 2 +
> >> drivers/pmdomain/thead/th1520-pm-domains.c | 218 +++++++++++++++
> >> .../dt-bindings/power/thead,th1520-power.h | 19 ++
> >> .../linux/firmware/thead/thead,th1520-aon.h | 200 ++++++++++++++
> >> 13 files changed, 770 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml
> >> create mode 100644 drivers/firmware/thead,th1520-aon.c
> >> create mode 100644 drivers/pmdomain/thead/Kconfig
> >> create mode 100644 drivers/pmdomain/thead/Makefile
> >> create mode 100644 drivers/pmdomain/thead/th1520-pm-domains.c
> >> create mode 100644 include/dt-bindings/power/thead,th1520-power.h
> >> create mode 100644 include/linux/firmware/thead/thead,th1520-aon.h
> >>
> >> --
> >> 2.34.1
> >>
> >
next prev parent reply other threads:[~2025-03-13 8:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20250311172030eucas1p12dda42760f751174e774b8d1a3d3f4cd@eucas1p1.samsung.com>
2025-03-11 17:18 ` [PATCH v8 0/5] TH1520 SoC: Add AON firmware & power-domain support Michal Wilczynski
2025-03-11 17:18 ` [PATCH v8 1/5] dt-bindings: firmware: thead,th1520: Add support for firmware node Michal Wilczynski
2025-03-11 17:18 ` [PATCH v8 2/5] firmware: thead: Add AON firmware protocol driver Michal Wilczynski
2025-03-11 17:18 ` [PATCH v8 3/5] dt-bindings: power: Add TH1520 SoC power domains Michal Wilczynski
2025-03-11 17:18 ` [PATCH v8 4/5] pmdomain: thead: Add power-domain driver for TH1520 Michal Wilczynski
2025-03-11 17:19 ` [PATCH v8 5/5] riscv: Enable PM_GENERIC_DOMAINS for T-Head SoCs Michal Wilczynski
2025-04-04 18:55 ` Drew Fustini
2025-04-07 15:50 ` Conor Dooley
2025-03-12 13:40 ` [PATCH v8 0/5] TH1520 SoC: Add AON firmware & power-domain support Ulf Hansson
2025-03-12 14:31 ` Michal Wilczynski
2025-03-13 8:12 ` Drew Fustini [this message]
2025-03-13 8:19 ` Drew Fustini
2025-03-13 7:56 ` Drew Fustini
2025-03-13 13:46 ` Ulf Hansson
2025-04-07 15:53 ` (subset) " Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z9KTUIix4z7xb/e1@x1 \
--to=drew@pdp7.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=guoren@kernel.org \
--cc=jszhang@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=m.szyprowski@samsung.com \
--cc=m.wilczynski@samsung.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).