devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3] Support Honeywell mpr pressure sensor
@ 2023-04-01  9:09 Andreas Klinger
  2023-04-01  9:38 ` Krzysztof Kozlowski
  0 siblings, 1 reply; 2+ messages in thread
From: Andreas Klinger @ 2023-04-01  9:09 UTC (permalink / raw)
  To: linux-iio, devicetree
  Cc: Jonathan Cameron, Lars-Peter Clausen, Rob Herring,
	Krzysztof Kozlowski, Angel Iglesias, linux-kernel

Support Honeywell mpr pressure sensor.

This patch series adds support for Honeywell mpr pressure sensors. There are a variety of sensors
with different pressure range supported. The pressure range needs to be set up in the device tree as
minimum and maximum pressure in Pascal.


Andreas Klinger (3):
  dt-bindings: iio: pressure: Support Honeywell mpr sensors
  iio: pressure: Honeywell mpr pressure sensor
  MAINTAINERS: Add Honeywell mpr sensor

 .../bindings/iio/pressure/honeywell,mpr.yaml  |  74 +++++
 MAINTAINERS                                   |   7 +
 drivers/iio/pressure/Kconfig                  |  12 +
 drivers/iio/pressure/Makefile                 |   1 +
 drivers/iio/pressure/mpr.c                    | 307 ++++++++++++++++++
 5 files changed, 401 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,mpr.yaml
 create mode 100644 drivers/iio/pressure/mpr.c

-- 
2.30.2

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH 0/3] Support Honeywell mpr pressure sensor
  2023-04-01  9:09 [PATCH 0/3] Support Honeywell mpr pressure sensor Andreas Klinger
@ 2023-04-01  9:38 ` Krzysztof Kozlowski
  0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-01  9:38 UTC (permalink / raw)
  To: Andreas Klinger, linux-iio, devicetree
  Cc: Jonathan Cameron, Lars-Peter Clausen, Rob Herring,
	Krzysztof Kozlowski, Angel Iglesias, linux-kernel

On 01/04/2023 11:09, Andreas Klinger wrote:
> Support Honeywell mpr pressure sensor.
> 
> This patch series adds support for Honeywell mpr pressure sensors. There are a variety of sensors
> with different pressure range supported. The pressure range needs to be set up in the device tree as
> minimum and maximum pressure in Pascal.
> 
Your threading is missing thus patches are scattered all over the inbox.

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-04-01  9:38 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-04-01  9:09 [PATCH 0/3] Support Honeywell mpr pressure sensor Andreas Klinger
2023-04-01  9:38 ` Krzysztof Kozlowski

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).