devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan McDowell <noodles@earth.li>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] ARM: dts: sun5i: Add port E pinmux settings for mmc2
Date: Thu, 20 Apr 2023 20:13:21 +0100	[thread overview]
Message-ID: <ZEGO0SbkBoPqV7kA@earth.li> (raw)
In-Reply-To: <20230416014756.2270af13@slackpad.lan>

On Sun, Apr 16, 2023 at 01:47:56AM +0100, Andre Przywara wrote:
> On Sat, 15 Apr 2023 18:46:24 +0100
> Jonathan McDowell <noodles@earth.li> wrote:
> 
> Hi,
> 
> > These alternate pins for mmc2 are brought out to the 40 pin U14 header
> > on the C.H.I.P and can be used to add an external MMC device with a 4
> > bit interface. See
> > 
> > https://byteporter.com/ntc-chip-micro-sd-slot/
> > 
> > for further details on how.
> > 
> > Signed-off-by: Jonathan McDowell <noodles@earth.li>
> > ---
> >  arch/arm/boot/dts/sun5i.dtsi | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
> > index 250d6b87ab4d..e4922506ce22 100644
> > --- a/arch/arm/boot/dts/sun5i.dtsi
> > +++ b/arch/arm/boot/dts/sun5i.dtsi
> > @@ -517,6 +517,14 @@ mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
> >  				bias-pull-up;
> >  			};
> > 
> 
> As this seems to be a highly non-standard and rare modification, that
> doesn't even get used in the mainline DT, please add a:
> 			/omit-if-no-ref/
> line, so we don't get this into every sun5i board.

Neat, will add in v2.

> Otherwise looks good, though I don't know if that should belong into
> the same DT overlay that is probably used to also enable the MMC2 node.

I pondered that, but we already have the mmc2-4bit-pc-pins definition
here so it seemed helpful to add the pe-pins too.

> > +			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
> > +				pins = "PE4", "PE5", "PE6", "PE7",
> > +				       "PE8", "PE9";
> > +				function = "mmc2";
> > +				drive-strength = <30>;
> > +				bias-pull-up;
> > +			};
> > +
> >  			mmc2_8bit_pins: mmc2-8bit-pins {
> >  				pins = "PC6", "PC7", "PC8", "PC9",
> >  				       "PC10", "PC11", "PC12", "PC13",
> 

J.

-- 
    "Where the f**k is all this    |  .''`.  Debian GNU/Linux Developer
  water coming from?" -- Captain   | : :' :  Happy to accept PGP signed
          of the Titanic           | `. `'   or encrypted mail - RSA
                                   |   `-    key on the keyservers.

  reply	other threads:[~2023-04-20 19:13 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-15 17:45 [PATCH 0/3] Minor device-tree additions for C.H.I.P Jonathan McDowell
2023-04-15 17:46 ` [PATCH 1/3] ARM: dts: sun5i: chip: Enable bluetooth Jonathan McDowell
2023-04-15 20:36   ` kernel test robot
2023-04-16  0:24   ` Andre Przywara
2023-04-20 19:12     ` Jonathan McDowell
2023-04-21  1:43       ` Saravana Kannan
2023-04-21  8:28         ` Jonathan McDowell
2023-04-21 22:45           ` Saravana Kannan
2023-04-24 17:34             ` Jonathan McDowell
2023-05-01 21:12               ` Saravana Kannan
2023-05-10 11:34                 ` Jonathan McDowell
2023-04-15 17:46 ` [PATCH 2/3] ARM: dts: sun5i: Add port E pinmux settings for mmc2 Jonathan McDowell
2023-04-16  0:47   ` Andre Przywara
2023-04-20 19:13     ` Jonathan McDowell [this message]
2023-04-15 17:47 ` [PATCH 3/3] ARM: dts: axp209: Add iio-hwmon node for internal temperature Jonathan McDowell
2023-04-16  7:27   ` Krzysztof Kozlowski
2023-04-20 19:06     ` Jonathan McDowell
2023-05-10 12:00 ` [PATCH v2 0/5] Minor device-tree additions for C.H.I.P Jonathan McDowell
2023-05-10 12:01   ` [PATCH v2 1/5] dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema Jonathan McDowell
2023-05-11 15:41     ` Jernej Škrabec
2023-05-11 18:55     ` Conor Dooley
2023-05-10 12:01   ` [PATCH v2 2/5] pinctrl: axp209: Add support for GPIO3 on the AXP209 Jonathan McDowell
2023-05-10 14:15     ` andy.shevchenko
2023-05-29  9:51     ` Linus Walleij
2023-06-01  7:30       ` Jonathan McDowell
2023-05-10 12:01   ` [PATCH v2 3/5] ARM: dts: sun5i: chip: Enable bluetooth Jonathan McDowell
2023-05-11 15:41     ` Jernej Škrabec
2023-05-10 12:02   ` [PATCH v2 4/5] ARM: dts: sun5i: Add port E pinmux settings for mmc2 Jonathan McDowell
2023-05-11 15:45     ` Jernej Škrabec
2023-05-10 12:02   ` [PATCH v2 5/5] ARM: dts: axp209: Add iio-hwmon node for internal temperature Jonathan McDowell
2023-05-11 16:11     ` Jernej Škrabec
2023-05-12 10:30       ` Jonathan McDowell
2023-05-12 16:37         ` Jernej Škrabec
2023-05-16 17:46   ` [PATCH v3 0/5] Minor device-tree additions for C.H.I.P Jonathan McDowell
2023-05-16 17:47     ` [PATCH v3 1/5] dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema Jonathan McDowell
2023-05-22  7:37       ` Linus Walleij
2023-05-26 12:24       ` Bartosz Golaszewski
2023-05-16 17:47     ` [PATCH v3 2/5] pinctrl: axp209: Add support for GPIO3 on the AXP209 Jonathan McDowell
2023-05-16 18:55       ` Andy Shevchenko
2023-05-18 21:21       ` Jernej Škrabec
2023-05-16 17:47     ` [PATCH v3 3/5] ARM: dts: sun5i: chip: Enable bluetooth Jonathan McDowell
2023-05-16 17:48     ` [PATCH v3 4/5] ARM: dts: sun5i: Add port E pinmux settings for mmc2 Jonathan McDowell
2023-05-16 17:48     ` [PATCH v3 5/5] ARM: dts: axp209: Add iio-hwmon node for internal temperature Jonathan McDowell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZEGO0SbkBoPqV7kA@earth.li \
    --to=noodles@earth.li \
    --cc=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).