From: Jeff LaBundy <jeff@labundy.com>
To: Fei Shao <fshao@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>,
Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
linux-mediatek <linux-mediatek@lists.infradead.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property
Date: Wed, 26 Apr 2023 20:01:43 -0500 [thread overview]
Message-ID: <ZEnJd5ph4LCGPBwF@nixie71> (raw)
In-Reply-To: <20230426144423.2820826-2-fshao@chromium.org>
Hi Fei,
On Wed, Apr 26, 2023 at 10:44:21PM +0800, Fei Shao wrote:
> We observed that on Chromebook device Steelix, if Goodix GT7375P
> touchscreen is powered in suspend (because, for example, it connects to
> an always-on regulator) and with the reset GPIO asserted, it will
> introduce about 14mW power leakage.
>
> To address that, we add this property to skip reset during suspend.
> If it's set, the driver will stop asserting the reset GPIO during
> power-down. Refer to the comments in the driver for details.
>
> Signed-off-by: Fei Shao <fshao@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
>
> (no changes since v2)
>
> Changes in v2:
> - Use a more accurate property name and with "goodix," prefix.
>
> .../devicetree/bindings/input/goodix,gt7375p.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
> index ce18d7dadae2..1edad1da1196 100644
> --- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
> +++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
> @@ -43,6 +43,15 @@ properties:
> itself as long as it allows the main board to make signals compatible
> with what the touchscreen is expecting for its IO rails.
>
> + goodix,no-reset-during-suspend:
> + description:
> + Set this to true to enforce the driver to not assert the reset GPIO
> + during suspend.
> + Due to potential touchscreen hardware flaw, back-powering could happen in
> + suspend if the power supply is on and with active-low reset GPIO asserted.
> + This property is used to avoid the back-powering issue.
> + type: boolean
> +
> required:
> - compatible
> - reg
> --
> 2.40.1.495.gc816e09b53d-goog
>
Many thanks to you and Doug for the informative discussion.
Kind regards,
Jeff LaBundy
prev parent reply other threads:[~2023-04-27 1:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-26 14:44 [PATCH v3 0/2] Fix Goodix touchscreen power leakage for MT8186 boards Fei Shao
2023-04-26 14:44 ` [PATCH v3 1/2] dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property Fei Shao
2023-04-27 1:01 ` Jeff LaBundy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZEnJd5ph4LCGPBwF@nixie71 \
--to=jeff@labundy.com \
--cc=benjamin.tissoires@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=fshao@chromium.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).