From: Yixun Lan <dlan@gentoo.org>
To: Yangtao Li <frank.li@vivo.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Jisheng Zhang <jszhang@kernel.org>, Wei Fu <wefu@redhat.com>,
Icenowy Zheng <uwu@icenowy.me>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/5] riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
Date: Thu, 11 May 2023 08:42:31 +0800 [thread overview]
Message-ID: <ZFw59xlxoCSyb--J@ofant> (raw)
In-Reply-To: <20230510204456.57202-3-frank.li@vivo.com>
Hi Yangtao:
On 04:44 Thu 11 May , Yangtao Li wrote:
> From: Jisheng Zhang <jszhang@kernel.org>
>
> Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
> module which is powered by T-HEAD's light(a.k.a TH1520) SoC. Add
> minimal device tree files for the core module and the development
> board.
>
> Support basic uart/gpio/dmac drivers, so supports booting to a basic
> shell.
>
> Cc: Icenowy Zheng <uwu@icenowy.me>
> Cc: Wei Fu <wefu@redhat.com>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> ---
> v2:
> -cleanup `light`
> arch/riscv/boot/dts/Makefile | 1 +
> arch/riscv/boot/dts/thead/Makefile | 2 +
> .../dts/thead/th1520-lichee-module-4a.dtsi | 39 +++++++++++++++++++
> .../boot/dts/thead/th1520-lichee-pi-4a.dts | 33 ++++++++++++++++
> 4 files changed, 75 insertions(+)
> create mode 100644 arch/riscv/boot/dts/thead/Makefile
> create mode 100644 arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> create mode 100644 arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
>
> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> index f0d9f89054f8..1e884868ccba 100644
> --- a/arch/riscv/boot/dts/Makefile
> +++ b/arch/riscv/boot/dts/Makefile
> @@ -2,6 +2,7 @@
> subdir-y += allwinner
> subdir-y += sifive
> subdir-y += starfive
> +subdir-y += thead
> subdir-y += canaan
> subdir-y += microchip
> subdir-y += renesas
> diff --git a/arch/riscv/boot/dts/thead/Makefile b/arch/riscv/boot/dts/thead/Makefile
> new file mode 100644
> index 000000000000..e311fc9a5939
> --- /dev/null
> +++ b/arch/riscv/boot/dts/thead/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_THEAD) += th1520-lichee-pi-4a.dtb
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> new file mode 100644
> index 000000000000..bc5f8677d546
> --- /dev/null
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
> + * Copyright (C) 2023 Yangtao Li <frank.li@vivo.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "th1520.dtsi"
> +
> +/ {
> + model = "Sipeed Lichee Module 4A";
> + compatible = "sipeed,lichee-module-4a", "thead,th1520";
we should have these compatibles documented, so a DT-Binding should go first
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x00000000 0x2 0x00000000>;
> + };
> +};
> +
> +&osc {
> + clock-frequency = <24000000>;
> +};
> +
> +&osc_32k {
> + clock-frequency = <32768>;
> +};
> +
> +&apb_clk {
> + clock-frequency = <62500000>;
> +};
> +
> +&uart_sclk {
> + clock-frequency = <100000000>;
> +};
for all the above clock-frequency, if it's a real fixed one - so should all hardware
be the same? then probably moving them to th1520.dtsi would be better?
> +
> +&dmac0 {
> + status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> new file mode 100644
> index 000000000000..86d677175feb
> --- /dev/null
> +++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
> + * Copyright (C) 2023 Yangtao Li <frank.li@vivo.com>
> + */
> +
> +#include "th1520-lichee-module-4a.dtsi"
> +
> +/ {
> + model = "Sipeed Lichee Pi 4A";
> + compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", "thead,th1520";
ditto
> +
> + aliases {
> + gpio0 = &gpio0;
> + gpio1 = &gpio1;
> + gpio2 = &gpio2;
> + gpio3 = &gpio3;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + serial4 = &uart4;
> + serial5 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> --
> 2.34.1
>
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
next prev parent reply other threads:[~2023-05-11 0:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230510204456.57202-1-frank.li@vivo.com>
2023-05-10 20:44 ` [PATCH v2 2/5] riscv: dts: add initial T-HEAD light SoC device tree Yangtao Li
2023-05-11 0:35 ` Yixun Lan
2023-05-11 0:39 ` Jisheng Zhang
2023-05-11 9:05 ` Krzysztof Kozlowski
2023-05-10 20:44 ` [PATCH v2 3/5] riscv: dts: thead: add sipeed Lichee Pi 4A board " Yangtao Li
2023-05-11 0:42 ` Yixun Lan [this message]
2023-05-11 9:12 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZFw59xlxoCSyb--J@ofant \
--to=dlan@gentoo.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank.li@vivo.com \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=uwu@icenowy.me \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox