From: Abdel Alkuor <alkuor@gmail.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: devicetree@vger.kernel.org, gregkh@linuxfoundation.org,
robh+dt@kernel.org, conor+dt@kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
abdelalkuor@geotab.com
Subject: Re: [PATCH v3 2/2] USB: typec: Add TI TPS25750 USB Type-C controller
Date: Sun, 20 Aug 2023 15:55:52 -0400 [thread overview]
Message-ID: <ZOJvyMMgu0sN8jGM@abdel> (raw)
In-Reply-To: <a13e829e-f238-41e8-1877-50c8cf009547@linaro.org>
On Sun, Aug 20, 2023 at 08:24:18AM +0200, Krzysztof Kozlowski wrote:
> On 20/08/2023 07:23, Abdel Alkuor wrote:
> > From: Abdel Alkuor <abdelalkuor@geotab.com>
> >
> > TPS25750 is USB Type-C controller and Power Delivery controller.
> >
> > TPS25750 needs to be configured after a cold reset. The configuration
> > can be applied either from an external EEPROM connected to the
> > controller or by a host using I2C. TI provides an online GUI that
> > can be used to generate the configuration binary.
> > Tool link: https://tinyurl.com/2s3watcm
> > P.S. It requires a TI account to be able to use the tool.
> >
> ...
>
>
> > +
> > +static void tps25750_remove(struct i2c_client *client)
> > +{
> > + struct tps25750 *tps = i2c_get_clientdata(client);
> > +
> > + tps25750_disconnect(tps, 0);
> > + typec_unregister_port(tps->port);
> > + usb_role_switch_put(tps->role_sw);
> > +
> > + /* clear the patch by a hard reset */
> > + tps25750_exec_normal_cmd(tps, TPS_4CC_GAID);
> > +}
> > +
> > +static int __maybe_unused tps25750_suspend(struct device *dev)
> > +{
> > + /* TODO: should we remove the patch? */
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused tps25750_resume(struct device *dev)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct tps25750 *tps = i2c_get_clientdata(client);
> > +
> > + /* The controller needs to be reinitialized again
>
> Format is:
>
> /*
> * The....
>
Fixed all mult-line comments in v4.
> > + * if it is powered off as config is not persisted
> > + */
> > + return tps25750_init(tps);
> > +}
> > +
> > +static const struct dev_pm_ops tps25750_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(tps25750_suspend, tps25750_resume)
> > +};
> > +
> > +static const struct of_device_id tps25750_of_match[] = {
> > + { .compatible = "ti,tps25750", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, tps25750_of_match);
> > +
> > +static const struct i2c_device_id tps25750_id[] = {
> > + { "tps25750" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, tps25750_id);
> > +
> > +static struct i2c_driver tps25750_i2c_driver = {
> > + .driver = {
> > + .name = "tps25750",
> > + .pm = pm_ptr(&tps25750_pm_ops),
> > + .of_match_table = of_match_ptr(tps25750_of_match),
>
> Drop of_match_ptr(). It will cause warnings.
>
Removed in v4.
> > + },
> > + .probe_new = tps25750_probe,
> > + .remove = tps25750_remove,
> > + .id_table = tps25750_id,
> > +};
> > +module_i2c_driver(tps25750_i2c_driver);
>
>
> Best regards,
> Krzysztof
>
Thanks,
Abdel
prev parent reply other threads:[~2023-08-20 19:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-20 5:23 [PATCH v3 0/2] Add support for TPS25750 Abdel Alkuor
2023-08-20 5:23 ` [PATCH v3 1/2] dt-bindings: usb: Add ti,tps25750 Abdel Alkuor
2023-08-20 6:17 ` Krzysztof Kozlowski
2023-08-20 5:23 ` [PATCH v3 2/2] USB: typec: Add TI TPS25750 USB Type-C controller Abdel Alkuor
2023-08-20 6:24 ` Krzysztof Kozlowski
2023-08-20 19:55 ` Abdel Alkuor [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZOJvyMMgu0sN8jGM@abdel \
--to=alkuor@gmail.com \
--cc=abdelalkuor@geotab.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).