From: Abdel Alkuor <alkuor@gmail.com>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: krzysztof.kozlowski+dt@linaro.org, bryan.odonoghue@linaro.org,
gregkh@linuxfoundation.org, robh+dt@kernel.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
conor+dt@kernel.org, linux-kernel@vger.kernel.org,
abdelalkuor@geotab.com
Subject: Re: [PATCH v5 10/15] USB: typec: Add port registration for tps25750
Date: Wed, 20 Sep 2023 10:53:23 -0400 [thread overview]
Message-ID: <ZQsHY/53tk0KJYUK@primary> (raw)
In-Reply-To: <ZQhJZ82nRCD797lA@kuha.fi.intel.com>
On Mon, Sep 18, 2023 at 03:58:15PM +0300, Heikki Krogerus wrote:
> On Sun, Sep 17, 2023 at 11:26:34AM -0400, Abdel Alkuor wrote:
> > From: Abdel Alkuor <abdelalkuor@geotab.com>
> >
> > TPS25750 doesn't have system configuration register to get dr/pr of the
> > current applied binary configuration.
> >
> > Get data role from the device node and power role from PD status register.
> >
> > Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com>
> > ---
> > drivers/usb/typec/tipd/core.c | 61 ++++++++++++++++++++++++++++++-
> > drivers/usb/typec/tipd/tps6598x.h | 10 +++++
> > 2 files changed, 70 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> > index 8218d88a4a06..a97fda68cb54 100644
> > --- a/drivers/usb/typec/tipd/core.c
> > +++ b/drivers/usb/typec/tipd/core.c
> > @@ -39,6 +39,7 @@
> > #define TPS_REG_CTRL_CONF 0x29
> > #define TPS_REG_BOOT_STATUS 0x2D
> > #define TPS_REG_POWER_STATUS 0x3f
> > +#define TPS_REG_PD_STATUS 0x40
> > #define TPS_REG_RX_IDENTITY_SOP 0x48
> > #define TPS_REG_DATA_STATUS 0x5f
> >
> > @@ -1028,6 +1029,60 @@ tps6598x_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode)
> > return 0;
> > }
> >
> > +static int
> > +tps25750_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode)
> > +{
> > + struct typec_capability typec_cap = { };
> > + const char *data_role;
> > + u8 pd_status;
> > + int ret;
> > +
> > + ret = tps6598x_read8(tps, TPS_REG_PD_STATUS, &pd_status);
> > + if (ret)
> > + return ret;
> > +
> > + ret = fwnode_property_read_string(fwnode, "data-role", &data_role);
> > + if (ret) {
> > + dev_err(tps->dev, "data-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_port_data_role(data_role);
> > + if (ret < 0) {
> > + dev_err(tps->dev, "unknown data-role: %s\n", data_role);
> > + return ret;
> > + }
> > +
> > + typec_cap.data = ret;
> > + typec_cap.revision = USB_TYPEC_REV_1_3;
> > + typec_cap.pd_revision = 0x300;
> > + typec_cap.driver_data = tps;
> > + typec_cap.ops = &tps6598x_ops;
> > + typec_cap.fwnode = fwnode;
> > + typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
> > +
> > + switch (TPS_PD_STATUS_PORT_TYPE(pd_status)) {
> > + case TPS_PD_STATUS_PORT_TYPE_SINK_SOURCE:
> > + case TPS_PD_STATUS_PORT_TYPE_SOURCE_SINK:
> > + typec_cap.type = TYPEC_PORT_DRP;
> > + break;
> > + case TPS_PD_STATUS_PORT_TYPE_SINK:
> > + typec_cap.type = TYPEC_PORT_SNK;
> > + break;
> > + case TPS_PD_STATUS_PORT_TYPE_SOURCE:
> > + typec_cap.type = TYPEC_PORT_SRC;
> > + break;
> > + default:
> > + return -ENODEV;
> > + }
> > +
> > + tps->port = typec_register_port(tps->dev, &typec_cap);
> > + if (IS_ERR(tps->port))
> > + return PTR_ERR(tps->port);
> > +
> > + return 0;
> > +}
> > +
> > static int tps6598x_probe(struct i2c_client *client)
> > {
> > irq_handler_t irq_handler = tps6598x_interrupt;
> > @@ -1124,7 +1179,11 @@ static int tps6598x_probe(struct i2c_client *client)
> > if (ret)
> > goto err_role_put;
> >
> > - ret = tps6598x_register_port(tps, fwnode);
> > + if (np && of_device_is_compatible(np, "ti,tps25750"))
>
> Why aren't you using is_tps25750 here?
Ops, I missed that. Will be fixed in v6.
>
> > + ret = tps25750_register_port(tps, fwnode);
> > + else
> > + ret = tps6598x_register_port(tps, fwnode);
> > +
> > if (ret)
> > goto err_role_put;
>
> thanks,
>
> --
> heikki
Thanks,
Abdel
next prev parent reply other threads:[~2023-09-20 15:06 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-17 15:26 [PATCH v5 00/15] Add TPS25750 USB type-C PD controller support Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 01/15] dt-bindings: usb: tps6598x: Add tps25750 Abdel Alkuor
2023-09-17 17:30 ` Krzysztof Kozlowski
2023-09-17 19:30 ` Abdel Alkuo
2023-09-17 15:26 ` [PATCH v5 02/15] USB: typec: Add cmd timeout and response delay Abdel Alkuor
2023-09-18 10:44 ` Heikki Krogerus
2023-09-20 14:29 ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 03/15] USB: typec: Add patch mode to tps6598x Abdel Alkuor
2023-09-18 11:07 ` Heikki Krogerus
2023-09-20 14:42 ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 04/15] USB: typec: Load TPS25750 patch bundle Abdel Alkuor
2023-09-17 17:04 ` kernel test robot
2023-09-17 17:24 ` kernel test robot
2023-09-18 11:31 ` Heikki Krogerus
2023-09-20 14:46 ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 05/15] USB: typec: Check for EEPROM present Abdel Alkuor
2023-09-18 12:45 ` Heikki Krogerus
2023-09-20 14:47 ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 06/15] USB: typec: Clear dead battery flag Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 07/15] USB: typec: Apply patch again after power resume Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 08/15] USB: typec: Add interrupt support for TPS25750 Abdel Alkuor
2023-09-18 12:46 ` Heikki Krogerus
2023-09-20 14:50 ` Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 09/15] USB: typec: Refactor tps6598x port registration Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 10/15] USB: typec: Add port registration for tps25750 Abdel Alkuor
2023-09-18 12:58 ` Heikki Krogerus
2023-09-20 14:53 ` Abdel Alkuor [this message]
2023-09-17 15:26 ` [PATCH v5 11/15] USB: typec: Enable sleep mode " Abdel Alkuor
2023-09-17 17:32 ` Krzysztof Kozlowski
2023-09-17 15:26 ` [PATCH v5 12/15] USB: typec: Add trace for tps25750 irq Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 13/15] USB: typec: Add power status trace for tps25750 Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 14/15] USB: typec: Add " Abdel Alkuor
2023-09-17 15:26 ` [PATCH v5 15/15] USB: typec: Do not check VID " Abdel Alkuor
2023-09-18 13:29 ` Heikki Krogerus
2023-09-20 15:10 ` Abdel Alkuor
2023-09-18 13:57 ` [PATCH v5 00/15] Add TPS25750 USB type-C PD controller support Heikki Krogerus
2023-09-20 15:21 ` Abdel Alkuor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZQsHY/53tk0KJYUK@primary \
--to=alkuor@gmail.com \
--cc=abdelalkuor@geotab.com \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).