From: Daniel Golle <daniel@makrotopia.org>
To: Frank Wunderlich <linux@fw-web.de>
Cc: linux-mediatek@lists.infradead.org,
Frank Wunderlich <frank-w@public-files.de>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable
Date: Thu, 28 Sep 2023 00:55:33 +0100 [thread overview]
Message-ID: <ZRTA9UtVm9zxf2QD@pidgin.makrotopia.org> (raw)
In-Reply-To: <20230922055020.6436-4-linux@fw-web.de>
On Fri, Sep 22, 2023 at 07:50:19AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
>
> The upcoming mt7988 has different temperature coefficients so we
> cannot use constants in the functions lvts_golden_temp_init,
> lvts_golden_temp_init and lvts_raw_to_temp anymore.
>
> Add a field in the lvts_ctrl pointing to the lvts_data which now
> contains the soc-specific temperature coefficents.
>
> To make the code better readable, rename static int coeff_b to
> golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.
>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
> ---
> v2:
> - rename static int coeff_b to golden_temp_offset
> - rename coeff.a to temp_factor and coeff.b to temp_offset
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
> 1 file changed, 34 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index effd9b00a424..c2669f405a94 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -80,8 +80,8 @@
> #define LVTS_SENSOR_MAX 4
> #define LVTS_GOLDEN_TEMP_MAX 62
> #define LVTS_GOLDEN_TEMP_DEFAULT 50
> -#define LVTS_COEFF_A -250460
> -#define LVTS_COEFF_B 250460
> +#define LVTS_COEFF_A_MT8195 -250460
> +#define LVTS_COEFF_B_MT8195 250460
>
> #define LVTS_MSR_IMMEDIATE_MODE 0
> #define LVTS_MSR_FILTERED_MODE 1
> @@ -94,7 +94,7 @@
> #define LVTS_MINIMUM_THRESHOLD 20000
>
> static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
> -static int coeff_b = LVTS_COEFF_B;
> +static int golden_temp_offset;
>
> struct lvts_sensor_data {
> int dt_id;
> @@ -112,6 +112,8 @@ struct lvts_ctrl_data {
> struct lvts_data {
> const struct lvts_ctrl_data *lvts_ctrl;
> int num_lvts_ctrl;
> + int temp_factor;
> + int temp_offset;
> };
>
> struct lvts_sensor {
> @@ -126,6 +128,7 @@ struct lvts_sensor {
>
> struct lvts_ctrl {
> struct lvts_sensor sensors[LVTS_SENSOR_MAX];
> + const struct lvts_data *lvts_data;
> u32 calibration[LVTS_SENSOR_MAX];
> u32 hw_tshut_raw_temp;
> int num_lvts_sensor;
> @@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
>
> #endif
>
> -static int lvts_raw_to_temp(u32 raw_temp)
> +static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
> {
> int temperature;
>
> - temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
> - temperature += coeff_b;
> + temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
> + temperature += golden_temp_offset;
>
> return temperature;
> }
>
> -static u32 lvts_temp_to_raw(int temperature)
> +static u32 lvts_temp_to_raw(int temperature, int temp_factor)
> {
> - u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
> + u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
>
> - raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
> + raw_temp = div_s64(raw_temp, -temp_factor);
>
> return raw_temp;
> }
> @@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
> static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
> {
> struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> + struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> + sensors[lvts_sensor->id]);
> + const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
> void __iomem *msr = lvts_sensor->msr;
> u32 value;
> int rc;
> @@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
> if (rc)
> return -EAGAIN;
>
> - *temp = lvts_raw_to_temp(value & 0xFFFF);
> + *temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
>
> return 0;
> }
> @@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
> static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
> {
> struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> - struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
> + struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> + sensors[lvts_sensor->id]);
> + const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
> void __iomem *base = lvts_sensor->base;
> - u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
> - u32 raw_high = lvts_temp_to_raw(high);
> + u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
> + lvts_data->temp_factor);
> + u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
> bool should_update_thresh;
>
> lvts_sensor->low_thresh = low;
> @@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
> return 0;
> }
>
> -static int lvts_golden_temp_init(struct device *dev, u32 *value)
> +static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
> {
> u32 gt;
>
> @@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
> if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
> golden_temp = gt;
>
> - coeff_b = golden_temp * 500 + LVTS_COEFF_B;
> + golden_temp_offset = golden_temp * 500 + temp_offset;
>
> return 0;
> }
> @@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
> * The golden temp information is contained in the first chunk
> * of efuse data.
> */
> - ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
> + ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
> if (ret)
> return ret;
>
> @@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
> for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
>
> lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
> + lvts_ctrl[i].lvts_data = lvts_data;
>
> ret = lvts_sensor_init(dev, &lvts_ctrl[i],
> &lvts_data->lvts_ctrl[i]);
> @@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
> * after initializing the calibration.
> */
> lvts_ctrl[i].hw_tshut_raw_temp =
> - lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
> + lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
> + lvts_data->temp_factor);
>
> lvts_ctrl[i].low_thresh = INT_MIN;
> lvts_ctrl[i].high_thresh = INT_MIN;
> @@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
> if (irq < 0)
> return irq;
>
> + golden_temp_offset = lvts_data->temp_offset;
> +
> ret = lvts_domain_init(dev, lvts_td, lvts_data);
> if (ret)
> return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
> @@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
> static const struct lvts_data mt8195_lvts_mcu_data = {
> .lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
> .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> + .temp_factor = LVTS_COEFF_A_MT8195,
> + .temp_offset = LVTS_COEFF_B_MT8195,
> };
>
> static const struct lvts_data mt8195_lvts_ap_data = {
> .lvts_ctrl = mt8195_lvts_ap_data_ctrl,
> .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
> + .temp_factor = LVTS_COEFF_A_MT8195,
> + .temp_offset = LVTS_COEFF_B_MT8195,
> };
>
> static const struct of_device_id lvts_of_match[] = {
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-09-27 23:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-22 5:50 [PATCH v3 0/4] add LVTS support for mt7988 Frank Wunderlich
2023-09-22 5:50 ` [PATCH v3 1/4] dt-bindings: thermal: mediatek: add mt7988 lvts compatible Frank Wunderlich
2023-09-22 5:50 ` [PATCH v3 2/4] dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988 Frank Wunderlich
2023-09-22 5:50 ` [PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable Frank Wunderlich
2023-09-27 23:55 ` Daniel Golle [this message]
2023-09-22 5:50 ` [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support Frank Wunderlich
2023-09-27 23:56 ` Daniel Golle
2023-09-28 7:37 ` Daniel Lezcano
2023-09-28 7:37 ` [PATCH v3 0/4] add LVTS support for mt7988 Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZRTA9UtVm9zxf2QD@pidgin.makrotopia.org \
--to=daniel@makrotopia.org \
--cc=amitk@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@fw-web.de \
--cc=matthias.bgg@gmail.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).