Re: [PATCH v13 05/10] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver

[Johan Hovold <johan@kernel.org>]

On Thu, Nov 23, 2023 at 01:02:24AM +0530, Krishna Kurapati PSSNV wrote:

>   Pushed [1] to address all the queries and comments. I was initially 
> looking at only Femto phy targets, but when I looked at all targets in 
> general, seems there is one irq not defined in bindings. It is qubs2_phy 
> irq which is named as "hs_phy_irq" on QUSB target DT's (both downstream 
> and upstream).
>
> There is one actual "hs_phy_irq" as well but it is not used either by hs 
> validation team or sw team on any target. It was put in for debug 
> purpose only and doesn't have code to trigger it (even downstream never 
> implemented it I suppose) Atleast 4.4 onwards I saw the code but I 
> didn't see the actual hs_phy_irq being used. It was the qusb2_phy irq 
> named as hs_phy_irq.
> 
> Even hw folks used it under the same name which is why they recommended 
> using it on qusb2 targets and dp/dm on femto targets.

Ah, thanks for getting to the bottom of this.

> On some targets the hs_phy_irq was given vector number of pwr_event irq 
> also like sm8550/sm8450 etc., I tried to address those as well in the 
> series.

I can imagine that we have a number of such issues.

> Also, per your question as to there are some qusb2 targets having dp/dm 
> interrupts defined... It is only for SDM845/SDM670/SM6350 which were 
> last in line of using qusb2 phy's and they started incorporating dp/dm 
> interrupts.

Ok.

> Also added missing interrupts for qcs404/ipq5332.

Thanks.

> I didn't add missing interrupts on sc8280xp because I see that current 
> interrupts present are working fine (I see ADB working and wakeup 
> working as well), but the interrupt vector numbers are off by "1" 
> between hs specifics and DT (both upstream and downstream). Will sort it 
> out and clean that target up later.

Which interrupt numbers are off by one here?
 
> [1]: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=803412

I took a quick look at the series, and it looks like this will
eventually clean things up a lot. We should probably define a generic
order for the interrupts with the sometimes optional SS interrupts last.

Side note: It looks like the threading in that series is broken.
Consider using git-send-email for sending series as it takes care of
things like that.

Johan