From: Paul Elder <paul.elder@ideasonboard.com>
To: Adam Ford <aford173@gmail.com>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
devicetree@vger.kernel.org, kieran.bingham@ideasonboard.com,
tomi.valkeinen@ideasonboard.com, umang.jain@ideasonboard.com
Subject: Re: [PATCH v4 00/11] media: rkisp1: Add support for i.MX8MP
Date: Thu, 30 Nov 2023 18:45:48 +0900 [thread overview]
Message-ID: <ZWhZzNQ6VWcfvWZy@pyrite.rasen.tech> (raw)
In-Reply-To: <CAHCN7xLgypy8YMhxM1g27DWU7hY3nwAYLYRSMMDtODeGdd_CQg@mail.gmail.com>
On Wed, Nov 29, 2023 at 05:36:25AM -0600, Adam Ford wrote:
> On Wed, Nov 29, 2023 at 3:28 AM Paul Elder <paul.elder@ideasonboard.com> wrote:
> >
> > This series extends the rkisp1 driver to support the ISP found in the
> > NXP i.MX8MP SoC.
> >
> > The ISP IP cores in the Rockchip RK3399 (known as the "Rockchip ISP1")
> > and in the NXP i.MX8MP have the same origin, and have slightly diverged
> > over time as they are now independently developed (afaik) by Rockchip
> > and VeriSilicon. The latter is marketed under the name "ISP8000Nano",
> > and is close enough to the RK3399 ISP that it can easily be supported by
> > the same driver.
> >
> > The last two patches add support for UYVY output format, which can be
> > implemented on the ISP version in the i.MX8MP but not in the one in the
> > RK3399.
> >
> > This version of the series specifically has been tested on a Polyhex
> > Debix model A with an imx219 (Raspberry Pi cam v2).
>
> I have tested previous versions with a imx219 camera running in 4-lane
> mode with great success. Should I apply this series against
> linux-next, or do I need to apply it against something in the media
> tree to test? I hope to test it tonight or tomorrow.
I have it applied on 6.7-rc1.
Thanks,
Paul
> >
> > Laurent Pinchart (2):
> > media: rkisp1: Add and use rkisp1_has_feature() macro
> > media: rkisp1: Configure gasket on i.MX8MP
> >
> > Paul Elder (9):
> > media: rkisp1: Support setting memory stride for main path
> > media: rkisp1: Support devices lacking self path
> > media: rkisp1: Support devices lacking dual crop
> > media: rkisp1: Fix RSZ_CTRL bits for i.MX8MP
> > dt-bindings: media: rkisp1: Add i.MX8MP ISP to compatible
> > media: rkisp1: Add match data for i.MX8MP ISP
> > media: rkisp1: Shift DMA buffer addresses on i.MX8MP
> > media: rkisp1: Add YC swap capability
> > media: rkisp1: Add UYVY as an output format
> >
> > .../bindings/media/rockchip-isp1.yaml | 37 ++++-
> > .../platform/rockchip/rkisp1/rkisp1-capture.c | 128 ++++++++++++-----
> > .../platform/rockchip/rkisp1/rkisp1-common.h | 35 ++++-
> > .../platform/rockchip/rkisp1/rkisp1-dev.c | 66 +++++++--
> > .../platform/rockchip/rkisp1/rkisp1-isp.c | 131 +++++++++++++++++-
> > .../platform/rockchip/rkisp1/rkisp1-regs.h | 32 +++++
> > .../platform/rockchip/rkisp1/rkisp1-resizer.c | 27 ++--
> > include/uapi/linux/rkisp1-config.h | 2 +
> > 8 files changed, 398 insertions(+), 60 deletions(-)
> >
> > --
> > 2.39.2
> >
next prev parent reply other threads:[~2023-11-30 9:46 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 9:27 [PATCH v4 00/11] media: rkisp1: Add support for i.MX8MP Paul Elder
2023-11-29 9:27 ` [PATCH v4 01/11] media: rkisp1: Add and use rkisp1_has_feature() macro Paul Elder
2023-11-29 9:27 ` [PATCH v4 02/11] media: rkisp1: Support setting memory stride for main path Paul Elder
2023-11-29 9:27 ` [PATCH v4 03/11] media: rkisp1: Support devices lacking self path Paul Elder
2023-11-29 9:27 ` [PATCH v4 04/11] media: rkisp1: Support devices lacking dual crop Paul Elder
2023-11-29 9:27 ` [PATCH v4 05/11] media: rkisp1: Fix RSZ_CTRL bits for i.MX8MP Paul Elder
2023-12-18 15:31 ` Tomi Valkeinen
2023-12-18 15:48 ` Laurent Pinchart
2023-11-29 9:27 ` [PATCH v4 06/11] dt-bindings: media: rkisp1: Add i.MX8MP ISP to compatible Paul Elder
2023-11-29 9:27 ` [PATCH v4 07/11] media: rkisp1: Add match data for i.MX8MP ISP Paul Elder
2023-11-29 9:27 ` [PATCH v4 08/11] media: rkisp1: Configure gasket on i.MX8MP Paul Elder
2023-11-29 9:27 ` [PATCH v4 09/11] media: rkisp1: Shift DMA buffer addresses " Paul Elder
2023-11-29 9:27 ` [PATCH v4 10/11] media: rkisp1: Add YC swap capability Paul Elder
2023-11-29 9:27 ` [PATCH v4 11/11] media: rkisp1: Add UYVY as an output format Paul Elder
2023-12-03 21:32 ` Adam Ford
2023-12-03 22:15 ` Adam Ford
2023-11-29 10:58 ` [PATCH v4 00/11] media: rkisp1: Add support for i.MX8MP Alexander Stein
2023-12-11 7:49 ` Alexander Stein
2023-11-29 11:36 ` Adam Ford
2023-11-30 9:45 ` Paul Elder [this message]
2023-12-09 23:59 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZWhZzNQ6VWcfvWZy@pyrite.rasen.tech \
--to=paul.elder@ideasonboard.com \
--cc=aford173@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=umang.jain@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).