* [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant
@ 2023-11-13 0:51 Wolfram Sang
2023-11-13 0:51 ` [PATCH v5 2/3] dt-bindings: gnss: u-blox: add "reset-gpios" binding Wolfram Sang
2023-12-12 3:30 ` [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
0 siblings, 2 replies; 6+ messages in thread
From: Wolfram Sang @ 2023-11-13 0:51 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: Wolfram Sang, devicetree, Johan Hovold, linux-kernel
The Renesas KingFisher board includes a U-Blox Neo-M8 chip with its
reset pin wired to a GPIO. To support that, we need "reset-gpio" support
(patches 2+3). But first, simplify regulator handling with a new helper
(patch 1).
Changes since v4:
* don't touch reset during open/close. Only deassert it during probe.
[patch 3]
Wolfram Sang (3):
gnss: ubx: use new helper to remove open coded regulator handling
dt-bindings: gnss: u-blox: add "reset-gpios" binding
gnss: ubx: add support for the reset gpio
.../bindings/gnss/u-blox,neo-6m.yaml | 5 +++
drivers/gnss/ubx.c | 31 +++++++------------
2 files changed, 16 insertions(+), 20 deletions(-)
--
2.35.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v5 2/3] dt-bindings: gnss: u-blox: add "reset-gpios" binding
2023-11-13 0:51 [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
@ 2023-11-13 0:51 ` Wolfram Sang
2023-12-12 3:30 ` [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
1 sibling, 0 replies; 6+ messages in thread
From: Wolfram Sang @ 2023-11-13 0:51 UTC (permalink / raw)
To: linux-renesas-soc
Cc: Wolfram Sang, Conor Dooley, Geert Uytterhoeven, Johan Hovold,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree,
linux-kernel
The Renesas KingFisher board includes a U-Blox Neo-M8 chip. This chip
has a reset pin which is also wired on the board. Introduce a binding to
support this reset pin.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 4835a280b3bf..8e97e475613f 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -41,6 +41,9 @@ properties:
description: >
Backup voltage regulator
+ reset-gpios:
+ maxItems: 1
+
required:
- compatible
- vcc-supply
@@ -49,10 +52,12 @@ unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
serial {
gnss {
compatible = "u-blox,neo-8";
v-bckp-supply = <&gnss_v_bckp_reg>;
vcc-supply = <&gnss_vcc_reg>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant
2023-11-13 0:51 [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
2023-11-13 0:51 ` [PATCH v5 2/3] dt-bindings: gnss: u-blox: add "reset-gpios" binding Wolfram Sang
@ 2023-12-12 3:30 ` Wolfram Sang
2023-12-14 15:53 ` Wolfram Sang
1 sibling, 1 reply; 6+ messages in thread
From: Wolfram Sang @ 2023-12-12 3:30 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: devicetree, Johan Hovold, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 472 bytes --]
On Sun, Nov 12, 2023 at 07:51:48PM -0500, Wolfram Sang wrote:
> The Renesas KingFisher board includes a U-Blox Neo-M8 chip with its
> reset pin wired to a GPIO. To support that, we need "reset-gpio" support
> (patches 2+3). But first, simplify regulator handling with a new helper
> (patch 1).
>
> Changes since v4:
>
> * don't touch reset during open/close. Only deassert it during probe.
> [patch 3]
Johan, all good now?
Happy hacking,
Wolfram
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant
2023-12-12 3:30 ` [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
@ 2023-12-14 15:53 ` Wolfram Sang
2023-12-15 8:34 ` Johan Hovold
0 siblings, 1 reply; 6+ messages in thread
From: Wolfram Sang @ 2023-12-14 15:53 UTC (permalink / raw)
To: linux-renesas-soc, devicetree, Johan Hovold, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 599 bytes --]
On Tue, Dec 12, 2023 at 04:30:10AM +0100, Wolfram Sang wrote:
> On Sun, Nov 12, 2023 at 07:51:48PM -0500, Wolfram Sang wrote:
> > The Renesas KingFisher board includes a U-Blox Neo-M8 chip with its
> > reset pin wired to a GPIO. To support that, we need "reset-gpio" support
> > (patches 2+3). But first, simplify regulator handling with a new helper
> > (patch 1).
> >
> > Changes since v4:
> >
> > * don't touch reset during open/close. Only deassert it during probe.
> > [patch 3]
>
> Johan, all good now?
If there are no further comments, can we have this series in 6.8.?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant
2023-12-14 15:53 ` Wolfram Sang
@ 2023-12-15 8:34 ` Johan Hovold
2023-12-15 20:15 ` Wolfram Sang
0 siblings, 1 reply; 6+ messages in thread
From: Johan Hovold @ 2023-12-15 8:34 UTC (permalink / raw)
To: Wolfram Sang; +Cc: linux-renesas-soc, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 733 bytes --]
On Thu, Dec 14, 2023 at 04:53:06PM +0100, Wolfram Sang wrote:
> On Tue, Dec 12, 2023 at 04:30:10AM +0100, Wolfram Sang wrote:
> > On Sun, Nov 12, 2023 at 07:51:48PM -0500, Wolfram Sang wrote:
> > > The Renesas KingFisher board includes a U-Blox Neo-M8 chip with its
> > > reset pin wired to a GPIO. To support that, we need "reset-gpio" support
> > > (patches 2+3). But first, simplify regulator handling with a new helper
> > > (patch 1).
> > >
> > > Changes since v4:
> > >
> > > * don't touch reset during open/close. Only deassert it during probe.
> > > [patch 3]
> >
> > Johan, all good now?
>
> If there are no further comments, can we have this series in 6.8.?
All good. Now applied for 6.8.
Johan
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant
2023-12-15 8:34 ` Johan Hovold
@ 2023-12-15 20:15 ` Wolfram Sang
0 siblings, 0 replies; 6+ messages in thread
From: Wolfram Sang @ 2023-12-15 20:15 UTC (permalink / raw)
To: Johan Hovold; +Cc: linux-renesas-soc, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 49 bytes --]
> All good. Now applied for 6.8.
Thank you! :)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-12-15 20:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-11-13 0:51 [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
2023-11-13 0:51 ` [PATCH v5 2/3] dt-bindings: gnss: u-blox: add "reset-gpios" binding Wolfram Sang
2023-12-12 3:30 ` [PATCH v5 0/3] gnss: ubx: support the reset pin of the Neo-M8 variant Wolfram Sang
2023-12-14 15:53 ` Wolfram Sang
2023-12-15 8:34 ` Johan Hovold
2023-12-15 20:15 ` Wolfram Sang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).