Re: [PATCH v4 09/15] iio: adc: ad7091r: Enable internal vref if external vref is not supplied

[Marcelo Schmitt <marcelo.schmitt1@gmail.com>]

On 12/17, David Lechner wrote:
> On Sat, Dec 16, 2023 at 11:49 AM Marcelo Schmitt
> <marcelo.schmitt@analog.com> wrote:
> >
> > The ADC needs a voltage reference to work correctly.
> > Enable AD7091R internal voltage reference if no external vref is supplied.
> >
> > Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
> > ---
> >  drivers/iio/adc/ad7091r-base.c | 7 +++++++
> >  drivers/iio/adc/ad7091r-base.h | 1 +
> >  2 files changed, 8 insertions(+)
> >
> > diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c
> > index aead72ef55b6..9d0b489966f5 100644
> > --- a/drivers/iio/adc/ad7091r-base.c
> > +++ b/drivers/iio/adc/ad7091r-base.c
> > @@ -217,7 +217,14 @@ int ad7091r_probe(struct device *dev, const struct ad7091r_init_info *init_info,
> >         if (IS_ERR(st->vref)) {
> >                 if (PTR_ERR(st->vref) == -EPROBE_DEFER)
> >                         return -EPROBE_DEFER;
> > +
> >                 st->vref = NULL;
> > +               /* Enable internal vref */
> > +               ret = regmap_update_bits(st->map, AD7091R_REG_CONF,
> > +                                        AD7091R_REG_CONF_INT_VREF, BIT(0));
> 
> Can we use regmap_set_bits() here to avoid the BIT(0)?
> 
> The same comment applies to other patches in this series.

Looks good, will do.

Thanks

> 
> > +               if (ret)
> > +                       return dev_err_probe(st->dev, ret,
> > +                                            "Error on enable internal reference\n");
> >         } else {
> >                 ret = regulator_enable(st->vref);
> >                 if (ret)
> > diff --git a/drivers/iio/adc/ad7091r-base.h b/drivers/iio/adc/ad7091r-base.h
> > index 81b8a4bbb929..9cfb362a00a4 100644
> > --- a/drivers/iio/adc/ad7091r-base.h
> > +++ b/drivers/iio/adc/ad7091r-base.h
> > @@ -20,6 +20,7 @@
> >  #define AD7091R_REG_CH_HYSTERESIS(ch) ((ch) * 3 + 6)
> >
> >  /* AD7091R_REG_CONF */
> > +#define AD7091R_REG_CONF_INT_VREF      BIT(0)
> >  #define AD7091R_REG_CONF_ALERT_EN      BIT(4)
> >  #define AD7091R_REG_CONF_AUTO          BIT(8)
> >  #define AD7091R_REG_CONF_CMD           BIT(10)
> > --
> > 2.42.0
> >