From: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Minda Chen <minda.chen@starfivetech.com>
Cc: "Conor Dooley" <conor@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Daire McNamara" <daire.mcnamara@microchip.com>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-pci@vger.kernel.org,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Mason Huo" <mason.huo@starfivetech.com>,
"Leyfoon Tan" <leyfoon.tan@starfivetech.com>,
"Kevin Xie" <kevin.xie@starfivetech.com>
Subject: Re: [PATCH v13 15/21] PCI: microchip: Add event irqchip field to host port and add PLDA irqchip
Date: Thu, 21 Dec 2023 16:32:57 +0100 [thread overview]
Message-ID: <ZYRaqYTcxWJGwWG8@lpieralisi> (raw)
In-Reply-To: <8c417157-8884-4e91-8912-0344e71f82c2@starfivetech.com>
On Thu, Dec 21, 2023 at 06:56:22PM +0800, Minda Chen wrote:
>
>
> On 2023/12/14 15:28, Minda Chen wrote:
> > PolarFire PCIE event IRQs includes PLDA local interrupts and PolarFire
> > their own IRQs. PolarFire PCIe event irq_chip ops using an event_desc to
> > unify different IRQ register addresses. On PLDA sides, PLDA irqchip codes
> > only require to set PLDA local interrupt register. So the PLDA irqchip ops
> > codes can not be extracted from PolarFire codes.
> >
> > To support PLDA its own event IRQ process, implements PLDA irqchip ops and
> > add event irqchip field to struct pcie_plda_rp.
> >
> > Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> > ---
> > .../pci/controller/plda/pcie-microchip-host.c | 65 ++++++++++++++++++-
> > drivers/pci/controller/plda/pcie-plda.h | 3 +
> > 2 files changed, 67 insertions(+), 1 deletion(-)
> >
> Hi Conor
> Could you take time to review this patch? For I using event irq chip instead of event ops and the whole patch have been changed. I think it's better
> And I added the implementation of PLDA event irqchip and make it easier to claim the necessity of the modification.
> If you approve this, I will add back the review tag. Thanks
>
> Hi Lorenzo
> Have you reviewed this patch? Does the commit message and the codes are can be approved ?Thanks
>
Please wrap the lines at 75 columns in length.
I have not reviewed but I am still struggling to understand the
commit log, I apologise, I can try to review the series and figure
out what the patch is doing but I would appreciate if commits logs
could be made easier to parse.
Thanks,
Lorenzo
> > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
> > index fd0d92c3d03f..ff40c1622173 100644
> > --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> > @@ -771,6 +771,63 @@ static struct irq_chip mc_event_irq_chip = {
> > .irq_unmask = mc_unmask_event_irq,
> > };
> > > +static u32 plda_hwirq_to_mask(int hwirq)
> > +{
> > + u32 mask;
> > +
> > + if (hwirq < EVENT_PM_MSI_INT_INTX)
> > + mask = BIT(hwirq + A_ATR_EVT_POST_ERR_SHIFT);
> > + else if (hwirq == EVENT_PM_MSI_INT_INTX)
> > + mask = PM_MSI_INT_INTX_MASK;
> > + else
> > + mask = BIT(hwirq + PM_MSI_TO_MASK_OFFSET);
> > +
> > + return mask;
> > +}
> > +
> > +static void plda_ack_event_irq(struct irq_data *data)
> > +{
> > + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> > +
> > + writel_relaxed(plda_hwirq_to_mask(data->hwirq),
> > + port->bridge_addr + ISTATUS_LOCAL);
> > +}
> > +
> > +static void plda_mask_event_irq(struct irq_data *data)
> > +{
> > + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> > + u32 mask, val;
> > +
> > + mask = plda_hwirq_to_mask(data->hwirq);
> > +
> > + raw_spin_lock(&port->lock);
> > + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> > + val &= ~mask;
> > + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> > + raw_spin_unlock(&port->lock);
> > +}
> > +
> > +static void plda_unmask_event_irq(struct irq_data *data)
> > +{
> > + struct plda_pcie_rp *port = irq_data_get_irq_chip_data(data);
> > + u32 mask, val;
> > +
> > + mask = plda_hwirq_to_mask(data->hwirq);
> > +
> > + raw_spin_lock(&port->lock);
> > + val = readl_relaxed(port->bridge_addr + IMASK_LOCAL);
> > + val |= mask;
> > + writel_relaxed(val, port->bridge_addr + IMASK_LOCAL);
> > + raw_spin_unlock(&port->lock);
> > +}
> > +
> > +static struct irq_chip plda_event_irq_chip = {
> > + .name = "PLDA PCIe EVENT",
> > + .irq_ack = plda_ack_event_irq,
> > + .irq_mask = plda_mask_event_irq,
> > + .irq_unmask = plda_unmask_event_irq,
> > +};
> > +
> > static const struct plda_event_ops plda_event_ops = {
> > .get_events = plda_get_events,
> > };
> > @@ -778,7 +835,9 @@ static const struct plda_event_ops plda_event_ops = {
> > static int plda_pcie_event_map(struct irq_domain *domain, unsigned int irq,
> > irq_hw_number_t hwirq)
> > {
> > - irq_set_chip_and_handler(irq, &mc_event_irq_chip, handle_level_irq);
> > + struct plda_pcie_rp *port = (void *)domain->host_data;
> > +
> > + irq_set_chip_and_handler(irq, port->event_irq_chip, handle_level_irq);
> > irq_set_chip_data(irq, domain->host_data);
> >
> > return 0;
> > @@ -963,6 +1022,9 @@ static int plda_init_interrupts(struct platform_device *pdev,
> > if (!port->event_ops)
> > port->event_ops = &plda_event_ops;
> >
> > + if (!port->event_irq_chip)
> > + port->event_irq_chip = &plda_event_irq_chip;
> > +
> > ret = plda_pcie_init_irq_domains(port);
> > if (ret) {
> > dev_err(dev, "failed creating IRQ domains\n");
> > @@ -1040,6 +1102,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
> > return ret;
> >
> > port->plda.event_ops = &mc_event_ops;
> > + port->plda.event_irq_chip = &mc_event_irq_chip;
> >
> > /* Address translation is up; safe to enable interrupts */
> > ret = plda_init_interrupts(pdev, &port->plda, &mc_event);
> > diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> > index dd8bc2750bfc..24ac50c458dc 100644
> > --- a/drivers/pci/controller/plda/pcie-plda.h
> > +++ b/drivers/pci/controller/plda/pcie-plda.h
> > @@ -128,6 +128,8 @@
> > * DMA end : reserved for vendor implement
> > */
> >
> > +#define PM_MSI_TO_MASK_OFFSET 19
> > +
> > struct plda_pcie_rp;
> >
> > struct plda_event_ops {
> > @@ -150,6 +152,7 @@ struct plda_pcie_rp {
> > raw_spinlock_t lock;
> > struct plda_msi msi;
> > const struct plda_event_ops *event_ops;
> > + const struct irq_chip *event_irq_chip;
> > void __iomem *bridge_addr;
> > int num_events;
> > };
next prev parent reply other threads:[~2023-12-21 15:33 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-14 7:28 [PATCH v13 0/21] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
2023-12-14 7:28 ` [PATCH v13 01/21] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties Minda Chen
2023-12-14 7:28 ` [PATCH v13 02/21] PCI: microchip: Move pcie-microchip-host.c to plda directory Minda Chen
2023-12-14 7:28 ` [PATCH v13 03/21] PCI: microchip: Move PLDA IP register macros to pcie-plda.h Minda Chen
2023-12-14 7:28 ` [PATCH v13 04/21] PCI: microchip: Add bridge_addr field to struct mc_pcie Minda Chen
2023-12-14 7:28 ` [PATCH v13 05/21] PCI: microchip: Rename two PCIe data structures Minda Chen
2023-12-14 7:28 ` [PATCH v13 06/21] PCI: microchip: Move PCIe host data structures to plda-pcie.h Minda Chen
2023-12-14 7:28 ` [PATCH v13 07/21] PCI: microchip: Rename two setup functions Minda Chen
2023-12-14 7:28 ` [PATCH v13 08/21] PCI: microchip: Change the argument of plda_pcie_setup_iomems() Minda Chen
2023-12-14 7:28 ` [PATCH v13 09/21] PCI: microchip: Move setup functions to pcie-plda-host.c Minda Chen
2023-12-27 15:49 ` Lorenzo Pieralisi
2023-12-28 9:46 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 10/21] PCI: microchip: Rename interrupt related functions Minda Chen
2023-12-27 15:52 ` Lorenzo Pieralisi
2023-12-29 3:44 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 11/21] PCI: microchip: Add num_events field to struct plda_pcie_rp Minda Chen
2023-12-27 15:55 ` Lorenzo Pieralisi
2023-12-29 3:46 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 12/21] PCI: microchip: Add request_event_irq() callback function Minda Chen
2023-12-27 16:01 ` Lorenzo Pieralisi
2023-12-28 11:58 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 13/21] PCI: microchip: Add INTx and MSI event num to struct plda_event Minda Chen
2023-12-14 7:28 ` [PATCH v13 14/21] PCI: microchip: Add get_events() callback and add PLDA get_event() Minda Chen
2023-12-27 16:31 ` Lorenzo Pieralisi
2023-12-28 10:04 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 15/21] PCI: microchip: Add event irqchip field to host port and add PLDA irqchip Minda Chen
2023-12-21 10:56 ` Minda Chen
2023-12-21 15:32 ` Lorenzo Pieralisi [this message]
2023-12-22 11:18 ` Minda Chen
2023-12-27 12:43 ` Lorenzo Pieralisi
2023-12-28 11:25 ` Minda Chen
2023-12-14 7:28 ` [PATCH v13 16/21] PCI: microchip: Move IRQ functions to pcie-plda-host.c Minda Chen
2023-12-14 7:28 ` [PATCH v13 17/21] PCI: plda: Add host init/deinit and map bus functions Minda Chen
2023-12-14 7:28 ` [PATCH v13 18/21] dt-bindings: PCI: Add StarFive JH7110 PCIe controller Minda Chen
2023-12-14 7:28 ` [PATCH v13 19/21] PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value Minda Chen
2023-12-27 16:03 ` Lorenzo Pieralisi
2023-12-27 19:08 ` Bjorn Helgaas
2023-12-14 7:28 ` [PATCH v13 20/21] PCI: starfive: Add JH7110 PCIe controller Minda Chen
2023-12-14 7:28 ` [PATCH v13 21/21] riscv: dts: starfive: add PCIe dts configuration for JH7110 Minda Chen
2024-01-03 22:40 ` [PATCH v13 0/21] Refactoring Microchip PCIe driver and add StarFive PCIe Kevin Hilman
2024-01-05 2:35 ` 回复: " Kevin Xie
2024-01-05 17:28 ` Kevin Hilman
2024-01-08 10:48 ` 回复: " Kevin Xie
2024-01-10 16:29 ` Emil Renner Berthing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZYRaqYTcxWJGwWG8@lpieralisi \
--to=lpieralisi@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=conor@kernel.org \
--cc=daire.mcnamara@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=kevin.xie@starfivetech.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=leyfoon.tan@starfivetech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mason.huo@starfivetech.com \
--cc=minda.chen@starfivetech.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).