Re: [PATCH v13 09/21] PCI: microchip: Move setup functions to pcie-plda-host.c

[Lorenzo Pieralisi <lpieralisi@kernel.org>]

On Thu, Dec 14, 2023 at 03:28:27PM +0800, Minda Chen wrote:
> Move setup functions to common pcie-plda-host.c. So these two functions
> can be re-used.
> 
> Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  drivers/pci/controller/plda/Kconfig           |  4 +
>  drivers/pci/controller/plda/Makefile          |  1 +
>  .../pci/controller/plda/pcie-microchip-host.c | 59 --------------
>  drivers/pci/controller/plda/pcie-plda-host.c  | 80 +++++++++++++++++++
>  drivers/pci/controller/plda/pcie-plda.h       |  5 ++
>  5 files changed, 90 insertions(+), 59 deletions(-)
>  create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
> 
> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
> index 5cb3be4fc98c..e54a82ee94f5 100644
> --- a/drivers/pci/controller/plda/Kconfig
> +++ b/drivers/pci/controller/plda/Kconfig
> @@ -3,10 +3,14 @@
>  menu "PLDA-based PCIe controllers"
>  	depends on PCI
>  
> +config PCIE_PLDA_HOST
> +	bool
> +
>  config PCIE_MICROCHIP_HOST
>  	tristate "Microchip AXI PCIe controller"
>  	depends on PCI_MSI && OF
>  	select PCI_HOST_COMMON
> +	select PCIE_PLDA_HOST
>  	help
>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>  	  Host Bridge driver.
> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
> index e1a265cbf91c..4340ab007f44 100644
> --- a/drivers/pci/controller/plda/Makefile
> +++ b/drivers/pci/controller/plda/Makefile
> @@ -1,2 +1,3 @@
>  # SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
> index 31ca8d44ee2a..2e79bcc7c0a5 100644
> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
>  	return mc_allocate_msi_domains(port);
>  }
>  
> -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> -				   phys_addr_t axi_addr, phys_addr_t pci_addr,
> -				   size_t size)
> -{
> -	u32 atr_sz = ilog2(size) - 1;
> -	u32 val;
> -
> -	if (index == 0)
> -		val = PCIE_CONFIG_INTERFACE;
> -	else
> -		val = PCIE_TX_RX_INTERFACE;
> -
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_TRSL_PARAM);
> -
> -	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
> -			    ATR_IMPL_ENABLE;
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
> -
> -	val = upper_32_bits(axi_addr);
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_SRC_ADDR);
> -
> -	val = lower_32_bits(pci_addr);
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> -
> -	val = upper_32_bits(pci_addr);
> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> -	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> -
> -	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> -	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
> -	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> -	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
> -}
> -
> -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> -				  struct plda_pcie_rp *port)
> -{
> -	void __iomem *bridge_base_addr = port->bridge_addr;
> -	struct resource_entry *entry;
> -	u64 pci_addr;
> -	u32 index = 1;
> -
> -	resource_list_for_each_entry(entry, &bridge->windows) {
> -		if (resource_type(entry->res) == IORESOURCE_MEM) {
> -			pci_addr = entry->res->start - entry->offset;
> -			plda_pcie_setup_window(bridge_base_addr, index,
> -					       entry->res->start, pci_addr,
> -					       resource_size(entry->res));
> -			index++;
> -		}
> -	}
> -
> -	return 0;
> -}
> -
>  static inline void mc_clear_secs(struct mc_pcie *port)
>  {
>  	void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
> new file mode 100644
> index 000000000000..19131181897f
> --- /dev/null
> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
> @@ -0,0 +1,80 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PLDA PCIe XpressRich host controller driver
> + *
> + * Copyright (C) 2023 Microchip Co. Ltd
> + *
> + * Author: Daire McNamara <daire.mcnamara@microchip.com>
> + */
> +
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci_regs.h>
> +#include <linux/pci-ecam.h>
> +#include <linux/platform_device.h>

Do you really require these headers ? Not in this patch,
in later patches and that's why every header should be
added when it is really needed.

Lorenzo

> +
> +#include "pcie-plda.h"
> +
> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
> +			    size_t size)
> +{
> +	u32 atr_sz = ilog2(size) - 1;
> +	u32 val;
> +
> +	if (index == 0)
> +		val = PCIE_CONFIG_INTERFACE;
> +	else
> +		val = PCIE_TX_RX_INTERFACE;
> +
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
> +			    ATR_IMPL_ENABLE;
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +	val = upper_32_bits(axi_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_SRC_ADDR);
> +
> +	val = lower_32_bits(pci_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +	val = upper_32_bits(pci_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> +
> +	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
> +	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
> +
> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> +			   struct plda_pcie_rp *port)
> +{
> +	void __iomem *bridge_base_addr = port->bridge_addr;
> +	struct resource_entry *entry;
> +	u64 pci_addr;
> +	u32 index = 1;
> +
> +	resource_list_for_each_entry(entry, &bridge->windows) {
> +		if (resource_type(entry->res) == IORESOURCE_MEM) {
> +			pci_addr = entry->res->start - entry->offset;
> +			plda_pcie_setup_window(bridge_base_addr, index,
> +					       entry->res->start, pci_addr,
> +					       resource_size(entry->res));
> +			index++;
> +		}
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
> index 363fcbbaf6ec..3deefd35fa5a 100644
> --- a/drivers/pci/controller/plda/pcie-plda.h
> +++ b/drivers/pci/controller/plda/pcie-plda.h
> @@ -120,4 +120,9 @@ struct plda_pcie_rp {
>  	void __iomem *bridge_addr;
>  };
>  
> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
> +			    size_t size);
> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
> +			   struct plda_pcie_rp *port);
>  #endif
> -- 
> 2.17.1
>