Re: [PATCH v4] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree

[Wolfram Sang <wsa+renesas@sang-engineering.com>]

[-- Attachment #1: Type: text/plain, Size: 1265 bytes --]


> > +       pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
> > +                   <&pins_mdio1>;
> > +
> > +       mdio {
> > +               /* CN15 and CN16 switches must be configured in MDIO2 mode */
> > +               switch0phy1: ethernet-phy@1 {
> > +                       reg = <1>;
> > +                       leds {
> > +                               #address-cells = <1>;
> > +                               #size-cells = <0>;
> > +
> > +                               led@0 {
> > +                                       reg = <0>;
> 
> color = <LED_COLOR_ID_GREEN>;
> 
> > +                               };
> > +                               led@1 {
> > +                                       reg = <1>;
> 
> color = <LED_COLOR_ID_ORANGE>;
> 
> > +                               };
> 
> The above should also have one of:
> 
>     function = LED_FUNCTION_LAN;
>     function = LED_FUNCTION_SPEED_LAN;
> 
> I don't know the LED function mapping.

I have an incremental fix for the LEDs to this patch. Thomas cannot
really do it because he doesn't have the board. I was waiting with my
patch until this patch is upstream, but I better send it out now, so you
can squash it into this one?


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]