Re: [PATCH v4 0/6] dmaengine: fsl-edma: integrate TCD64 support for 64bit physical address

[Frank Li <Frank.li@nxp.com>]

On Thu, Dec 21, 2023 at 10:35:22AM -0500, Frank Li wrote:
> Change from v3 to v4.	
> Fixed tcd64 type as fsl_edma_hw_tcd64
> 
> Change from v2 to v3:
>  - fix sparse build warning
> 
> Change from v1 to v2:
> - fixed mcf-edma-main.c build error.
> - fixed readq build error. readq actually is not atomic read in imx95.
> So split to two ioread32\iowrite32.
>   It needs read at least twice to avoid lower 32 bit part wrap during read
> up 32bit part.
> 
> first 2 patch is prepare, No function change.
> 3rd patch is dt-bind doc
> 4rd patch is actuall support TCD64

@vnod:

	Could you please check these patches? I still have more patches,
which depended on this.
	eDMA is used for cross whole i.MX chips.
		
Frank

> 
> Frank Li (6):
>   dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
>   dmaengine: fsl-edma: fix spare build warning
>   dmaengine: fsl-edma: add address for channel mux register in
>     fsl_edma_chan
>   dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
>   dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
>   dmaengine: fsl-edma: integrate TCD64 support for i.MX95
> 
>  .../devicetree/bindings/dma/fsl,edma.yaml     |   2 +
>  drivers/dma/fsl-edma-common.c                 | 101 ++++++-----
>  drivers/dma/fsl-edma-common.h                 | 161 ++++++++++++++++--
>  drivers/dma/fsl-edma-main.c                   |  19 ++-
>  drivers/dma/mcf-edma-main.c                   |   2 +-
>  5 files changed, 223 insertions(+), 62 deletions(-)
> 
> -- 
> 2.34.1
>