[PATCH v2] dt-bindings: net: qca,ar9331: convert to DT schema

Krzysztof Kozlowski
2024-02-12T18:29:15Z

Convert the Qualcomm Atheros AR9331 built-in switch bindings to DT
schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

DSA switch bindings still bring me headache...

Changes in v2:
1. Narrow pattern for phy children to ethernet-phy@ or phy@ (MIPS DTS
has the latter) - Conor.
---
.../devicetree/bindings/net/dsa/ar9331.txt | 147 ----------------
.../bindings/net/dsa/qca,ar9331.yaml | 161 ++++++++++++++++++
2 files changed, 161 insertions(+), 147 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/dsa/ar9331.txt
create mode 100644 Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml

diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
deleted file mode 100644
index f824fdae0da2..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Atheros AR9331 built-in switch
-=============================
-
-It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
-MDIO bus. All PHYs are built-in as well.
-
-Required properties:
-
- - compatible: should be: "qca,ar9331-switch"
- - reg: Address on the MII bus for the switch.
- - resets : Must contain an entry for each entry in reset-names.
- - reset-names : Must include the following entries: "switch"
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the switch
- - interrupt-controller: Indicates the switch is itself an interrupt
- controller. This is used for the PHY interrupts.
- - #interrupt-cells: must be 1
- - mdio: Container of PHY and devices on the switches MDIO bus.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-Examples:
-
-eth0: ethernet@19000000 {
- compatible = "qca,ar9330-eth";
- reg = <0x19000000 0x200>;
- interrupts = <4>;
-
- resets = <&rst 9>, <&rst 22>;
- reset-names = "mac", "mdio";
- clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
- clock-names = "eth", "mdio";
-
- phy-mode = "mii";
- phy-handle = <&phy_port4>;
-};
-
-eth1: ethernet@1a000000 {
- compatible = "qca,ar9330-eth";
- reg = <0x1a000000 0x200>;
- interrupts = <5>;
- resets = <&rst 13>, <&rst 23>;
- reset-names = "mac", "mdio";
- clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
- clock-names = "eth", "mdio";
-
- phy-mode = "gmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch10: switch@10 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "qca,ar9331-switch";
- reg = <0x10>;
- resets = <&rst 8>;
- reset-names = "switch";
-
- interrupt-parent = <&miscintc>;
- interrupts = <12>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch_port0: port@0 {
- reg = <0x0>;
- ethernet = <&eth1>;
-
- phy-mode = "gmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- switch_port1: port@1 {
- reg = <0x1>;
- phy-handle = <&phy_port0>;
- phy-mode = "internal";
- };
-
- switch_port2: port@2 {
- reg = <0x2>;
- phy-handle = <&phy_port1>;
- phy-mode = "internal";
- };
-
- switch_port3: port@3 {
- reg = <0x3>;
- phy-handle = <&phy_port2>;
- phy-mode = "internal";
- };
-
- switch_port4: port@4 {
- reg = <0x4>;
- phy-handle = <&phy_port3>;
- phy-mode = "internal";
- };
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&switch10>;
-
- phy_port0: phy@0 {
- reg = <0x0>;
- interrupts = <0>;
- };
-
- phy_port1: phy@1 {
- reg = <0x1>;
- interrupts = <0>;
- };
-
- phy_port2: phy@2 {
- reg = <0x2>;
- interrupts = <0>;
- };
-
- phy_port3: phy@3 {
- reg = <0x3>;
- interrupts = <0>;
- };
-
- phy_port4: phy@4 {
- reg = <0x4>;
- interrupts = <0>;
- };
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml b/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml
new file mode 100644
index 000000000000..fd9ddc59d38c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca,ar9331.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9331 built-in switch
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+ Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and
+ addressable over internal MDIO bus. All PHYs are built-in as well.
+
+properties:
+ compatible:
+ const: qca,ar9331-switch
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+ properties:
+ interrupt-parent: true
+
+ patternProperties:
+ '(ethernet-)?phy@[0-4]+$':
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ reg: true
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: switch
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - mdio
+ - ports
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch10: switch@10 {
+ compatible = "qca,ar9331-switch";
+ reg = <0x10>;
+
+ interrupt-parent = <&miscintc>;
+ interrupts = <12>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ resets = <&rst 8>;
+ reset-names = "switch";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+ ethernet = <&eth1>;
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+ phy-handle = <&phy_port0>;
+ phy-mode = "internal";
+ };
+
+ port@2 {
+ reg = <0x2>;
+ phy-handle = <&phy_port1>;
+ phy-mode = "internal";
+ };
+
+ port@3 {
+ reg = <0x3>;
+ phy-handle = <&phy_port2>;
+ phy-mode = "internal";
+ };
+
+ port@4 {
+ reg = <0x4>;
+ phy-handle = <&phy_port3>;
+ phy-mode = "internal";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&switch10>;
+
+ phy_port0: ethernet-phy@0 {
+ reg = <0x0>;
+ interrupts = <0>;
+ };
+
+ phy_port1: ethernet-phy@1 {
+ reg = <0x1>;
+ interrupts = <0>;
+ };
+
+ phy_port2: ethernet-phy@2 {
+ reg = <0x2>;
+ interrupts = <0>;
+ };
+
+ phy_port3: ethernet-phy@3 {
+ reg = <0x3>;
+ interrupts = <0>;
+ };
+
+ phy_port4: ethernet-phy@4 {
+ reg = <0x4>;
+ interrupts = <0>;
+ };
+ };
+ };
+ };
--
2.34.1