devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: manivannan.sadhasivam@linaro.org, bhelgaas@google.com,
	conor+dt@kernel.org, devicetree@vger.kernel.org,
	festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
	imx@lists.linux.dev, kernel@pengutronix.de,
	krzysztof.kozlowski+dt@linaro.org,
	krzysztof.kozlowski@linaro.org, kw@linux.com,
	l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, robh@kernel.org,
	s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
Date: Tue, 13 Feb 2024 11:57:55 +0100	[thread overview]
Message-ID: <ZctLM7xLf7L3CJrr@lpieralisi> (raw)
In-Reply-To: <20240119171122.3057511-8-Frank.Li@nxp.com>

On Fri, Jan 19, 2024 at 12:11:13PM -0500, Frank Li wrote:
> Add drvdata::mode_off and drvdata::mode_mask to simplify
> imx6_pcie_configure_type() logic.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> 
> Notes:
>     Chagne from v8 to v9
>     - add Manivannan's review tag
>     Change from v7 to v8
>     - replace simple with simplify
>     - remove reduntant comments about FILED_PREP
>     Change from v3 to v7
>     - none
>     Change from v2 to v3
>     - none
>     Change from v1 to v2
>     - use ffs() to fixe build error.
>     
>     Change from v2 to v3
>     - none
>     Change from v1 to v2
>     - use ffs() to fixe build error.
> 
>  drivers/pci/controller/dwc/pci-imx6.c | 59 ++++++++++++++++++---------
>  1 file changed, 39 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index d19fcb54fde0d..8df07b71c93e5 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -68,6 +68,7 @@ enum imx6_pcie_variants {
>  
>  #define IMX6_PCIE_MAX_CLKS       6
>  
> +#define IMX6_PCIE_MAX_INSTANCES			2
>  struct imx6_pcie_drvdata {
>  	enum imx6_pcie_variants variant;
>  	enum dw_pcie_device_mode mode;
> @@ -78,6 +79,8 @@ struct imx6_pcie_drvdata {
>  	const u32 clks_cnt;
>  	const u32 ltssm_off;
>  	const u32 ltssm_mask;
> +	const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
> +	const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
>  };
>  
>  struct imx6_pcie {
> @@ -174,32 +177,24 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
>  
>  static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
>  {
> -	unsigned int mask, val, mode;
> +	const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
> +	unsigned int mask, val, mode, id;
>  
> -	if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
> +	if (drvdata->mode == DW_PCIE_EP_TYPE)
>  		mode = PCI_EXP_TYPE_ENDPOINT;
>  	else
>  		mode = PCI_EXP_TYPE_ROOT_PORT;
>  
> -	switch (imx6_pcie->drvdata->variant) {
> -	case IMX8MQ:
> -	case IMX8MQ_EP:
> -		if (imx6_pcie->controller_id == 1) {
> -			mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> -			val  = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> -					  mode);
> -		} else {
> -			mask = IMX6Q_GPR12_DEVICE_TYPE;
> -			val  = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> -		}
> -		break;
> -	default:
> -		mask = IMX6Q_GPR12_DEVICE_TYPE;
> -		val  = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> -		break;
> -	}
> +	id = imx6_pcie->controller_id;
> +
> +	/* If mode_mask[id] is zero, means each controller have its individual gpr */
> +	if (!drvdata->mode_mask[id])
> +		id = 0;

I don't understand what this means. If the mode mask for id is == 0, we
are falling back to mode_mask and mode_off for controller ID 0 ? Is that
what this code is supposed to do ? If so the comment makes no sense to
me.

Lorenzo

> +
> +	mask = drvdata->mode_mask[id];
> +	val = mode << (ffs(mask) - 1);
>  
> -	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> +	regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
>  }
>  
>  static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
> @@ -1385,6 +1380,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.clks_cnt = ARRAY_SIZE(imx6q_clks),
>  		.ltssm_off = IOMUXC_GPR12,
>  		.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX6SX] = {
>  		.variant = IMX6SX,
> @@ -1396,6 +1393,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.clks_cnt = ARRAY_SIZE(imx6sx_clks),
>  		.ltssm_off = IOMUXC_GPR12,
>  		.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX6QP] = {
>  		.variant = IMX6QP,
> @@ -1408,6 +1407,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.clks_cnt = ARRAY_SIZE(imx6q_clks),
>  		.ltssm_off = IOMUXC_GPR12,
>  		.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX7D] = {
>  		.variant = IMX7D,
> @@ -1417,6 +1418,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx7d-iomuxc-gpr",
>  		.clk_names = imx6q_clks,
>  		.clks_cnt = ARRAY_SIZE(imx6q_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX8MQ] = {
>  		.variant = IMX8MQ,
> @@ -1425,6 +1428,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx8mq-iomuxc-gpr",
>  		.clk_names = imx8mq_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> +		.mode_off[1] = IOMUXC_GPR12,
> +		.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
>  	},
>  	[IMX8MM] = {
>  		.variant = IMX8MM,
> @@ -1434,6 +1441,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx8mm-iomuxc-gpr",
>  		.clk_names = imx8mm_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX8MP] = {
>  		.variant = IMX8MP,
> @@ -1443,6 +1452,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx8mp-iomuxc-gpr",
>  		.clk_names = imx8mm_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX8MQ_EP] = {
>  		.variant = IMX8MQ_EP,
> @@ -1452,6 +1463,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx8mq-iomuxc-gpr",
>  		.clk_names = imx8mq_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> +		.mode_off[1] = IOMUXC_GPR12,
> +		.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
>  	},
>  	[IMX8MM_EP] = {
>  		.variant = IMX8MM_EP,
> @@ -1460,6 +1475,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx8mm-iomuxc-gpr",
>  		.clk_names = imx8mm_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  	[IMX8MP_EP] = {
>  		.variant = IMX8MP_EP,
> @@ -1468,6 +1485,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  		.gpr = "fsl,imx8mp-iomuxc-gpr",
>  		.clk_names = imx8mm_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
> +		.mode_off[0] = IOMUXC_GPR12,
> +		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
>  	},
>  };
>  
> -- 
> 2.34.1
> 

  reply	other threads:[~2024-02-13 10:58 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-19 17:11 [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-01-19 17:11 ` [PATCH v9 01/16] PCI: imx6: Simplify clock handling by using clk_bulk*() function Frank Li
2024-01-19 17:11 ` [PATCH v9 02/16] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV Frank Li
2024-01-19 17:11 ` [PATCH v9 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2024-01-19 17:11 ` [PATCH v9 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li
2024-01-19 17:11 ` [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2024-02-02 12:12   ` Lorenzo Pieralisi
2024-02-02 13:25     ` Frank Li
2024-02-02 18:53       ` Lorenzo Pieralisi
2024-02-05 17:41         ` Frank Li
2024-02-02 21:54   ` Bjorn Helgaas
2024-02-02 22:22     ` Frank Li
2024-02-02 22:51       ` Bjorn Helgaas
2024-02-03  1:01         ` Frank Li
2024-01-19 17:11 ` [PATCH v9 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-01-19 17:11 ` [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2024-02-13 10:57   ` Lorenzo Pieralisi [this message]
2024-01-19 17:11 ` [PATCH v9 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2024-01-19 17:11 ` [PATCH v9 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-01-19 17:11 ` [PATCH v9 10/16] dt-bindings: imx6q-pcie: Restruct reg and reg-name Frank Li
2024-01-23 20:36   ` Rob Herring
2024-01-19 17:11 ` [PATCH v9 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-01-19 17:11 ` [PATCH v9 12/16] PCI: imx6: Add iMX95 PCIe Root Complex support Frank Li
2024-01-19 17:11 ` [PATCH v9 13/16] PCI: imx6: Clean up get addr_space code Frank Li
2024-01-19 17:11 ` [PATCH v9 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-01-19 17:11 ` [PATCH v9 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-01-19 17:11 ` [PATCH v9 16/16] PCI: imx6: Add iMX95 Endpoint (EP) support Frank Li
2024-02-13 10:38   ` Lorenzo Pieralisi
2024-02-13 13:23     ` Robin Murphy
2024-02-13 15:35       ` Frank Li
2024-01-25 15:31 ` [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-02-01 19:34   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZctLM7xLf7L3CJrr@lpieralisi \
    --to=lpieralisi@kernel.org \
    --cc=Frank.Li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=hongxing.zhu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).