Re: [PATCH v4 0/5] PCI: dwc: Add common pme_turn_off message by using outbound iATU

[Frank Li <Frank.li@nxp.com>]

On Tue, Feb 13, 2024 at 04:50:21PM -0500, Frank Li wrote:
> Involve an new and common mathod to send pme_turn_off() message. Previously
> pme_turn_off() implement by platform related special register to trigge    
> it.                                                                        

@mani:

	Do you have chance look this patches. Actually other patches
already reviewed. Only missed

	PCI: dwc: Add common send PME_Turn_Off message method
	PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro

	This patch will reduce customer's PME_Turn_off method. Many code
can be cleaned after this.

Frank Li

>                                                                            
> But Yoshihiro give good idea by using iATU to send out message. Previously 
> Yoshihiro provide patches to raise INTx message by dummy write to outbound 
> iATU.                                                                      
>                                                                            
> Use similar mathod to send out pme_turn_off message.                       
>                                                                            
> Previous two patches is picked from Yoshihiro' big patch serialise.        
>  PCI: dwc: Change arguments of dw_pcie_prog_outbound_atu()                 
>  PCI: Add INTx Mechanism Messages macros                                   
>                                                                            
> PCI: Add PME_TURN_OFF message macro                                        
> dt-bindings: PCI: dwc: Add 'msg" register region, Add "msg" region to use  
> to map PCI msg.                                                            
>                                                                            
> PCI: dwc: Add common pme_turn_off message method                           
> Using common pme_turn_off() message if platform have not define their.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Changes in v4:
> - Remove dt-binding patch. Needn't change any dts file and binding doc.
>   Reserve a region at end of first IORESOURCE_MEM window by call
>   request_resource(). So PCIe stack will not use this reserve region to any
> PCIe devices.
>   I tested it by reserve at begin of IORESOURCE_MEM window. PCIe stack
> will skip it as expection.
> 
>   Fixed a issue, forget set iATU index when sent PME_turn_off.
> 
> - Link to v3: https://lore.kernel.org/r/20240202-pme_msg-v3-0-ff2af57a02ad@nxp.com
> 
> Changes in v3:
> - fix 'MSG"
> - Add pcie spec ref in head file
> - using function name dw_pci_pme_turn_off()
> - Using PCIE_ prefix macro
> - Link to v2: https://lore.kernel.org/r/20240201-pme_msg-v2-0-6767052fe6a4@nxp.com
> 
> Changes in v2:
>   - Add my sign off at PCI: dwc: Add outbound MSG TLPs support
>   - Add Bjorn review tag at  Add INTx Mechanism Messages macros
>   - using PME_Turn_Off match PCIe spec
>   - ref to pcie spec v6.1
>   - using section number.
> 
> - Link to v1: https://lore.kernel.org/r/20240130-pme_msg-v1-0-d52b0add5c7c@nxp.com
> 
> ---
> Frank Li (2):
>       PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro
>       PCI: dwc: Add common send PME_Turn_Off message method
> 
> Yoshihiro Shimoda (3):
>       PCI: Add INTx Mechanism Messages macros
>       PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure
>       PCI: dwc: Add outbound MSG TLPs support
> 
>  drivers/pci/controller/dwc/pcie-designware-ep.c   |  21 ++--
>  drivers/pci/controller/dwc/pcie-designware-host.c | 145 +++++++++++++++++++---
>  drivers/pci/controller/dwc/pcie-designware.c      |  54 ++++----
>  drivers/pci/controller/dwc/pcie-designware.h      |  21 +++-
>  drivers/pci/pci.h                                 |  20 +++
>  5 files changed, 197 insertions(+), 64 deletions(-)
> ---
> base-commit: e08fc59eee9991afa467d406d684d46d543299a9
> change-id: 20240130-pme_msg-dd2d81ee9886
> 
> Best regards,
> -- 
> Frank Li <Frank.Li@nxp.com>
>