Re: [PATCH v2 0/2] add uSDHC and SCMI nodes to the S32G2 SoC

[Chester Lin <chester62515@gmail.com>]

Hi,

On Thu, Feb 08, 2024 at 11:34:58AM +0200, Ghennadi Procopciuc wrote:
> On 1/22/24 16:05, Ghennadi Procopciuc wrote:
> > From: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
> > 
> > This patchset adds device tree support for S32G2 SCMI firmware and uSDHC
> > node. The SCMI clock IDs are based on a downstream version of the TF-A
> > stored on GitHub [0].
> > 
> > I can send the patches individually if you prefer that instead of
> > submitting them all at once.??
> > 
> > [0] https://github.com/nxp-auto-linux/arm-trusted-firmware
> > 
> > Changes in v2:
> >  - The SCMI clock bindings header has been removed.
> > 
> > Ghennadi Procopciuc (2):
> >   arm64: dts: s32g: add SCMI firmware node
> >   arm64: dts: s32g: add uSDHC node
> > 
> >  arch/arm64/boot/dts/freescale/s32g2.dtsi      | 37 ++++++++++++++++++-
> >  .../arm64/boot/dts/freescale/s32g274a-evb.dts |  6 ++-
> >  .../boot/dts/freescale/s32g274a-rdb2.dts      |  6 ++-
> >  3 files changed, 46 insertions(+), 3 deletions(-)
> > 
> Hi Chester,
> 
> I want to confirm if you are open to accepting the proposed changes for
> ARM/NXP S32G architecture, given your maintainer role. Please let me
> know if any revisions or adaptations are required.
> 

These patches look good to me.

Hi Shawn,

Per the discussion in another thread, could you help to apply these two
through the imx tree? Thanks!

Chester

> Regards,
> Ghennadi
>