* [PATCH v17 1/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info Krishna Kurapati
` (7 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
Add bindings to indicate properties required to support multiport
on Synopsys DWC3 controller.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
.../devicetree/bindings/usb/snps,dwc3.yaml | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 203a1eb66691..bfac0a37d0e4 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -85,15 +85,16 @@ properties:
phys:
minItems: 1
- maxItems: 2
+ maxItems: 8
phy-names:
minItems: 1
- maxItems: 2
- items:
- enum:
- - usb2-phy
- - usb3-phy
+ maxItems: 8
+ oneOf:
+ - items:
+ enum: [ usb2-phy, usb3-phy ]
+ - items:
+ pattern: "^usb[23]-[0-3]$"
power-domains:
description:
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 1/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 3/9] usb: dwc3: core: Skip setting event buffers for host only controllers Krishna Kurapati
` (6 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
All DWC3 Multi Port controllers that exist today only support host mode.
Temporarily map XHCI address space for host-only controllers and parse
XHCI Extended Capabilities registers to read number of usb2 ports and
usb3 ports present on multiport controller. Each USB Port is at least HS
capable.
The port info for usb2 and usb3 phy are identified as num_usb2_ports
and num_usb3_ports. The intention is as follows:
Wherever we need to perform phy operations like:
LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS()
{
phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
}
If number of usb2 ports is 3, loop can go from index 0-2 for
usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure,
if the first 2 ports are SS capable or some other ports like (2 and 3)
are SS capable. So instead, num_usb2_ports is used to loop around all
phy's (both hs and ss) for performing phy operations. If any
usb3_generic_phy turns out to be NULL, phy operation just bails out.
num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up
phy's as we need to know how many SS capable ports are there for this.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 5 ++++
2 files changed, 66 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3e55838c0001..fab7664c12c0 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -39,6 +39,7 @@
#include "io.h"
#include "debug.h"
+#include "../host/xhci-ext-caps.h"
#define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */
@@ -1879,10 +1880,56 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
return 0;
}
+static int dwc3_read_port_info(struct dwc3 *dwc)
+{
+ void __iomem *base;
+ u8 major_revision;
+ u32 offset;
+ u32 val;
+
+ /*
+ * Remap xHCI address space to access XHCI ext cap regs since it is
+ * needed to get information on number of ports present.
+ */
+ base = ioremap(dwc->xhci_resources[0].start,
+ resource_size(&dwc->xhci_resources[0]));
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ offset = 0;
+ do {
+ offset = xhci_find_next_ext_cap(base, offset,
+ XHCI_EXT_CAPS_PROTOCOL);
+ if (!offset)
+ break;
+
+ val = readl(base + offset);
+ major_revision = XHCI_EXT_PORT_MAJOR(val);
+
+ val = readl(base + offset + 0x08);
+ if (major_revision == 0x03) {
+ dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
+ } else if (major_revision <= 0x02) {
+ dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
+ } else {
+ dev_warn(dwc->dev, "unrecognized port major revision %d\n",
+ major_revision);
+ }
+ } while (1);
+
+ dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
+ dwc->num_usb2_ports, dwc->num_usb3_ports);
+
+ iounmap(base);
+
+ return 0;
+}
+
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res, dwc_res;
+ unsigned int hw_mode;
void __iomem *regs;
struct dwc3 *dwc;
int ret;
@@ -1966,6 +2013,20 @@ static int dwc3_probe(struct platform_device *pdev)
goto err_disable_clks;
}
+ /*
+ * Currently only DWC3 controllers that are host-only capable
+ * can have more than one port.
+ */
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+ ret = dwc3_read_port_info(dwc);
+ if (ret)
+ goto err_disable_clks;
+ } else {
+ dwc->num_usb2_ports = 1;
+ dwc->num_usb3_ports = 1;
+ }
+
spin_lock_init(&dwc->lock);
mutex_init(&dwc->mutex);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c07edfc954f7..40b00a895a2a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1039,6 +1039,8 @@ struct dwc3_scratchpad_array {
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
* @usb3_generic_phy: pointer to USB3 PHY
+ * @num_usb2_ports: number of USB2 ports
+ * @num_usb3_ports: number of USB3 ports
* @phys_ready: flag to indicate that PHYs are ready
* @ulpi: pointer to ulpi interface
* @ulpi_ready: flag to indicate that ULPI is initialized
@@ -1186,6 +1188,9 @@ struct dwc3 {
struct phy *usb2_generic_phy;
struct phy *usb3_generic_phy;
+ u8 num_usb2_ports;
+ u8 num_usb3_ports;
+
bool phys_ready;
struct ulpi *ulpi;
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 3/9] usb: dwc3: core: Skip setting event buffers for host only controllers
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 1/9] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Krishna Kurapati
` (5 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
On some SoC's like SA8295P where the tertiary controller is host-only
capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
Trying to access them leads to a crash.
For DRD/Peripheral supported controllers, event buffer setup is done
again in gadget_pullup. Skip setup or cleanup of event buffers if
controller is host-only capable.
Suggested-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
---
drivers/usb/dwc3/core.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index fab7664c12c0..ba0bfa9f85b6 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -486,6 +486,13 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
{
struct dwc3_event_buffer *evt;
+ unsigned int hw_mode;
+
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+ dwc->ev_buf = NULL;
+ return 0;
+ }
evt = dwc3_alloc_one_event_buffer(dwc, length);
if (IS_ERR(evt)) {
@@ -507,6 +514,9 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
+ if (!dwc->ev_buf)
+ return 0;
+
evt = dwc->ev_buf;
evt->lpos = 0;
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
@@ -524,6 +534,9 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
+ if (!dwc->ev_buf)
+ return;
+
evt = dwc->ev_buf;
evt->lpos = 0;
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
` (2 preceding siblings ...)
2024-03-26 10:28 ` [PATCH v17 3/9] usb: dwc3: core: Skip setting event buffers for host only controllers Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport Krishna Kurapati
` (4 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
Currently the DWC3 driver supports only single port controller
which requires at least one HS PHY and at most one SS PHY.
But the DWC3 USB controller can be connected to multiple ports and
each port can have their own PHYs. Each port of the multiport
controller can either be HS+SS capable or HS only capable
Proper quantification of them is required to modify GUSB2PHYCFG
and GUSB3PIPECTL registers appropriately.
Add support for detecting, obtaining and configuring PHYs supported
by a multiport controller. Limit support to multiport controllers
with up to four ports for now (e.g. as needed for SC8280XP).
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/core.c | 251 ++++++++++++++++++++++++++++------------
drivers/usb/dwc3/core.h | 14 ++-
drivers/usb/dwc3/drd.c | 15 ++-
3 files changed, 193 insertions(+), 87 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index ba0bfa9f85b6..4b4e7254456e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -124,6 +124,7 @@ static void __dwc3_set_mode(struct work_struct *work)
int ret;
u32 reg;
u32 desired_dr_role;
+ int i;
mutex_lock(&dwc->mutex);
spin_lock_irqsave(&dwc->lock, flags);
@@ -201,8 +202,10 @@ static void __dwc3_set_mode(struct work_struct *work)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+ }
if (dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
@@ -217,8 +220,8 @@ static void __dwc3_set_mode(struct work_struct *work)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
@@ -589,22 +592,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
return ret;
}
-/**
- * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
- * @dwc: Pointer to our controller context structure
- *
- * Returns 0 on success. The USB PHY interfaces are configured but not
- * initialized. The PHY interfaces and the PHYs get initialized together with
- * the core in dwc3_core_init.
- */
-static int dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
{
unsigned int hw_mode;
u32 reg;
hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
/*
* Make sure UX_EXIT_PX is cleared as that causes issues with some
@@ -659,9 +654,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_del_phy_power_chg_quirk)
reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ return 0;
+}
+
+static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
+{
+ unsigned int hw_mode;
+ u32 reg;
+
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
/* Select the HS PHY interface */
switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
@@ -673,7 +678,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
} else if (dwc->hsphy_interface &&
!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
} else {
/* Relying on default value. */
if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
@@ -740,7 +745,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->ulpi_ext_vbus_drv)
reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
+
+ return 0;
+}
+
+/**
+ * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
+ */
+static int dwc3_phy_setup(struct dwc3 *dwc)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ ret = dwc3_ss_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = dwc3_hs_phy_setup(dwc, i);
+ if (ret)
+ return ret;
+ }
return 0;
}
@@ -748,23 +781,32 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
static int dwc3_phy_init(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_shutdown_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_init(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_exit_phy;
- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_exit_usb2_phy;
+ ret = phy_init(dwc->usb3_generic_phy[i]);
+ if (ret < 0) {
+ phy_exit(dwc->usb2_generic_phy[i]);
+ goto err_exit_phy;
+ }
+ }
return 0;
-err_exit_usb2_phy:
- phy_exit(dwc->usb2_generic_phy);
-err_shutdown_usb3_phy:
+err_exit_phy:
+ for (j = i - 1; j >= 0; j--) {
+ phy_exit(dwc->usb3_generic_phy[j]);
+ phy_exit(dwc->usb2_generic_phy[j]);
+ }
+
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -773,8 +815,12 @@ static int dwc3_phy_init(struct dwc3 *dwc)
static void dwc3_phy_exit(struct dwc3 *dwc)
{
- phy_exit(dwc->usb3_generic_phy);
- phy_exit(dwc->usb2_generic_phy);
+ int i;
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_exit(dwc->usb3_generic_phy[i]);
+ phy_exit(dwc->usb2_generic_phy[i]);
+ }
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -783,23 +829,32 @@ static void dwc3_phy_exit(struct dwc3 *dwc)
static int dwc3_phy_power_on(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
- ret = phy_power_on(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_suspend_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_power_on(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_power_off_phy;
- ret = phy_power_on(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_power_off_usb2_phy;
+ ret = phy_power_on(dwc->usb3_generic_phy[i]);
+ if (ret < 0) {
+ phy_power_off(dwc->usb2_generic_phy[i]);
+ goto err_power_off_phy;
+ }
+ }
return 0;
-err_power_off_usb2_phy:
- phy_power_off(dwc->usb2_generic_phy);
-err_suspend_usb3_phy:
+err_power_off_phy:
+ for (j = i - 1; j >= 0; j--) {
+ phy_power_off(dwc->usb3_generic_phy[j]);
+ phy_power_off(dwc->usb2_generic_phy[j]);
+ }
+
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -808,8 +863,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc)
static void dwc3_phy_power_off(struct dwc3 *dwc)
{
- phy_power_off(dwc->usb3_generic_phy);
- phy_power_off(dwc->usb2_generic_phy);
+ int i;
+
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_power_off(dwc->usb3_generic_phy[i]);
+ phy_power_off(dwc->usb2_generic_phy[i]);
+ }
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -1201,6 +1260,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
unsigned int hw_mode;
u32 reg;
int ret;
+ int i;
hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
@@ -1244,15 +1304,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
if (!dwc->dis_u3_susphy_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- reg |= DWC3_GUSB3PIPECTL_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+ for (i = 0; i < dwc->num_usb3_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
+ reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
+ }
}
if (!dwc->dis_u2_susphy_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
}
}
@@ -1372,7 +1436,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
struct device_node *node = dev->of_node;
+ char phy_name[9];
int ret;
+ int i;
if (node) {
dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
@@ -1398,22 +1464,36 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
- dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
- if (IS_ERR(dwc->usb2_generic_phy)) {
- ret = PTR_ERR(dwc->usb2_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb2_generic_phy = NULL;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->num_usb2_ports == 1)
+ sprintf(phy_name, "usb2-phy");
else
- return dev_err_probe(dev, ret, "no usb2 phy configured\n");
- }
+ sprintf(phy_name, "usb2-%d", i);
+
+ dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb2_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb2_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb2_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "failed to lookup phy %s\n",
+ phy_name);
+ }
- dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
- if (IS_ERR(dwc->usb3_generic_phy)) {
- ret = PTR_ERR(dwc->usb3_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb3_generic_phy = NULL;
+ if (dwc->num_usb2_ports == 1)
+ sprintf(phy_name, "usb3-phy");
else
- return dev_err_probe(dev, ret, "no usb3 phy configured\n");
+ sprintf(phy_name, "usb3-%d", i);
+
+ dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb3_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb3_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb3_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret, "failed to lookup phy %s\n",
+ phy_name);
+ }
}
return 0;
@@ -1423,6 +1503,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
int ret;
+ int i;
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
@@ -1430,8 +1511,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
+ phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
@@ -1442,8 +1523,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
- phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
+ phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
+ }
ret = dwc3_host_init(dwc);
if (ret)
@@ -1935,6 +2018,10 @@ static int dwc3_read_port_info(struct dwc3 *dwc)
iounmap(base);
+ if (dwc->num_usb2_ports > DWC3_MAX_PORTS ||
+ dwc->num_usb3_ports > DWC3_MAX_PORTS)
+ return -ENOMEM;
+
return 0;
}
@@ -2172,6 +2259,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
u32 reg;
+ int i;
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2190,17 +2278,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
dwc->dis_enblslpm_quirk) {
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
- DWC3_GUSB2PHYCFG_SUSPHY;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
+ DWC3_GUSB2PHYCFG_SUSPHY;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
/* Give some time for USB2 PHY to suspend */
usleep_range(5000, 6000);
}
- phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
+ phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* do nothing during runtime_suspend */
@@ -2230,6 +2322,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
unsigned long flags;
int ret;
u32 reg;
+ int i;
switch (dwc->current_dr_role) {
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -2249,17 +2342,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
break;
}
/* Restore GUSB2PHYCFG bits that were modified in suspend */
- reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (dwc->dis_u2_susphy_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
+ if (dwc->dis_u2_susphy_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- if (dwc->dis_enblslpm_quirk)
- reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+ if (dwc->dis_enblslpm_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
- dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
+ }
- phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
- phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
+ phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
+ }
break;
case DWC3_GCTL_PRTCAP_OTG:
/* nothing to do on runtime_resume */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 40b00a895a2a..861b99eee812 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -33,6 +33,12 @@
#include <linux/power_supply.h>
+/*
+ * Maximum number of ports currently supported for multiport
+ * controllers.
+ */
+#define DWC3_MAX_PORTS 4
+
#define DWC3_MSG_MAX 500
/* Global constants */
@@ -1037,8 +1043,8 @@ struct dwc3_scratchpad_array {
* @usb_psy: pointer to power supply interface.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
- * @usb2_generic_phy: pointer to USB2 PHY
- * @usb3_generic_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to array of USB2 PHYs
+ * @usb3_generic_phy: pointer to array of USB3 PHYs
* @num_usb2_ports: number of USB2 ports
* @num_usb3_ports: number of USB3 ports
* @phys_ready: flag to indicate that PHYs are ready
@@ -1185,8 +1191,8 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
- struct phy *usb2_generic_phy;
- struct phy *usb3_generic_phy;
+ struct phy *usb2_generic_phy[DWC3_MAX_PORTS];
+ struct phy *usb3_generic_phy[DWC3_MAX_PORTS];
u8 num_usb2_ports;
u8 num_usb3_ports;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 57ddd2e43022..d76ae676783c 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -331,6 +331,7 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
u32 reg;
int id;
unsigned long flags;
+ int i;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -386,9 +387,12 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
- PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->usb2_generic_phy[i]) {
+ phy_set_mode(dwc->usb2_generic_phy[i],
+ PHY_MODE_USB_HOST);
+ }
+ }
}
break;
case DWC3_OTG_ROLE_DEVICE:
@@ -400,9 +404,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
- PHY_MODE_USB_DEVICE);
+ if (dwc->usb2_generic_phy[0])
+ phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
ret = dwc3_gadget_init(dwc);
if (ret)
dev_err(dwc->dev, "failed to initialize peripheral\n");
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
` (3 preceding siblings ...)
2024-03-26 10:28 ` [PATCH v17 4/9] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts Krishna Kurapati
` (3 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event irq interrupts supported by this controller
(one for each port of multiport). Added all the 4 as non-optional
interrupts for SC8280XP-MP
Also each port of multiport has one DP and oen DM IRQ. Add all DP/DM
IRQ's related to 4 ports of SC8280XP Teritiary controller.
Also added ss phy irq for both SS Ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
.../devicetree/bindings/usb/qcom,dwc3.yaml | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 38a3404ec71b..f55f601c0329 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -30,6 +30,7 @@ properties:
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8280xp-dwc3
+ - qcom,sc8280xp-dwc3-mp
- qcom,sdm660-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
@@ -282,6 +283,7 @@ allOf:
contains:
enum:
- qcom,sc8280xp-dwc3
+ - qcom,sc8280xp-dwc3-mp
- qcom,x1e80100-dwc3
then:
properties:
@@ -470,6 +472,38 @@ allOf:
- const: dm_hs_phy_irq
- const: ss_phy_irq
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3-mp
+ then:
+ properties:
+ interrupts:
+ minItems: 18
+ maxItems: 18
+ interrupt-names:
+ items:
+ - const: pwr_event_1
+ - const: pwr_event_2
+ - const: pwr_event_3
+ - const: pwr_event_4
+ - const: hs_phy_1
+ - const: hs_phy_2
+ - const: hs_phy_3
+ - const: hs_phy_4
+ - const: dp_hs_phy_1
+ - const: dm_hs_phy_1
+ - const: dp_hs_phy_2
+ - const: dm_hs_phy_2
+ - const: dp_hs_phy_3
+ - const: dm_hs_phy_3
+ - const: dp_hs_phy_4
+ - const: dm_hs_phy_4
+ - const: ss_phy_1
+ - const: ss_phy_2
+
additionalProperties: false
examples:
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
` (4 preceding siblings ...)
2024-03-26 10:28 ` [PATCH v17 5/9] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver Krishna Kurapati
` (2 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
The logic for requesting interrupts is duplicated for each interrupt. In
the upcoming patches that introduces support for multiport, it would be
better to clean up the duplication before reading mulitport related
interrupts.
Refactor interrupt setup call by adding a new helper function for
requesting the wakeup interrupts. To simplify implementation, make
the display name same as the interrupt name expected in DT.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 53 ++++++++++++++++--------------------
1 file changed, 24 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index f6b2fab49d5e..cae5dab8fcfc 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -501,6 +501,22 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
PIPE_UTMI_CLK_DIS);
}
+static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
+ const char *name)
+{
+ int ret;
+
+ /* Keep wakeup interrupts disabled until suspend */
+ ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+ qcom_dwc3_resume_irq,
+ IRQF_ONESHOT | IRQF_NO_AUTOEN,
+ name, qcom);
+ if (ret)
+ dev_err(qcom->dev, "failed to request irq %s: %d\n", name, ret);
+
+ return ret;
+}
+
static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
@@ -509,54 +525,33 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
if (irq > 0) {
- /* Keep wakeup interrupts disabled until suspend */
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 QUSB2", qcom);
- if (ret) {
- dev_err(qcom->dev, "qusb2_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ if (ret)
return ret;
- }
qcom->qusb2_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 DP_HS", qcom);
- if (ret) {
- dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
+ if (ret)
return ret;
- }
qcom->dp_hs_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 DM_HS", qcom);
- if (ret) {
- dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
+ if (ret)
return ret;
- }
qcom->dm_hs_phy_irq = irq;
}
irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
if (irq > 0) {
- ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
- qcom_dwc3_resume_irq,
- IRQF_ONESHOT | IRQF_NO_AUTOEN,
- "qcom_dwc3 SS", qcom);
- if (ret) {
- dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
+ ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
+ if (ret)
return ret;
- }
qcom->ss_phy_irq = irq;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
` (5 preceding siblings ...)
2024-03-26 10:28 ` [PATCH v17 6/9] usb: dwc3: qcom: Add helper function to request wakeup interrupts Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:44 ` Johan Hovold
2024-03-26 10:28 ` [PATCH v17 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper Krishna Kurapati
8 siblings, 1 reply; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
On multiport supported controllers, each port has its own DP/DM
and SS (if super speed capable) interrupts. As per the bindings,
their interrupt names differ from standard ones having "_x" added
as suffix (x indicates port number). Identify from the interrupt
names whether the controller is a multiport controller or not.
Refactor dwc3_qcom_setup_irq() call to parse multiport interrupts
along with non-multiport ones accordingly..
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 137 ++++++++++++++++++++++++++---------
1 file changed, 103 insertions(+), 34 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index cae5dab8fcfc..38452104337c 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,13 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
+struct dwc3_qcom_port {
+ int qusb2_phy_irq;
+ int dp_hs_phy_irq;
+ int dm_hs_phy_irq;
+ int ss_phy_irq;
+};
+
struct dwc3_qcom {
struct device *dev;
void __iomem *qscratch_base;
@@ -59,11 +66,8 @@ struct dwc3_qcom {
struct clk **clks;
int num_clocks;
struct reset_control *resets;
-
- int qusb2_phy_irq;
- int dp_hs_phy_irq;
- int dm_hs_phy_irq;
- int ss_phy_irq;
+ struct dwc3_qcom_port ports[DWC3_MAX_PORTS];
+ u8 num_ports;
enum usb_device_speed usb2_speed;
struct extcon_dev *edev;
@@ -354,24 +358,24 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
{
- dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
(qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
} else {
- dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
- dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
}
- dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
}
static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
{
- dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
/*
* Configure DP/DM line interrupts based on the USB2 device attached to
@@ -383,20 +387,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
*/
if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
- IRQ_TYPE_EDGE_FALLING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ IRQ_TYPE_EDGE_FALLING);
} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
(qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
- IRQ_TYPE_EDGE_FALLING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ IRQ_TYPE_EDGE_FALLING);
} else {
- dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
- IRQ_TYPE_EDGE_RISING);
- dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
- IRQ_TYPE_EDGE_RISING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ IRQ_TYPE_EDGE_RISING);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ IRQ_TYPE_EDGE_RISING);
}
- dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
}
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -517,42 +521,107 @@ static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
return ret;
}
-static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+static int dwc3_qcom_setup_port_irq(struct platform_device *pdev, int port_num, bool is_multiport)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ const char *irq_name;
int irq;
int ret;
- irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
+ if (is_multiport)
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_num + 1);
+ else
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_irq");
+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
if (ret)
return ret;
- qcom->qusb2_phy_irq = irq;
+ qcom->ports[port_num].dp_hs_phy_irq = irq;
}
- irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
+ if (is_multiport)
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_%d", port_num + 1);
+ else
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_irq");
+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
+ ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
if (ret)
return ret;
- qcom->dp_hs_phy_irq = irq;
+ qcom->ports[port_num].dm_hs_phy_irq = irq;
}
- irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
+ if (is_multiport)
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_%d", port_num + 1);
+ else
+ irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_irq");
+ if (!irq_name)
+ return -ENOMEM;
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
+ ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
if (ret)
return ret;
- qcom->dm_hs_phy_irq = irq;
+ qcom->ports[port_num].ss_phy_irq = irq;
}
- irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
+ if (is_multiport)
+ return 0;
+
+ irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
if (irq > 0) {
- ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
+ ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
+ if (ret)
+ return ret;
+ qcom->ports[port_num].qusb2_phy_irq = irq;
+ }
+
+ return 0;
+}
+
+static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
+{
+ char irq_name[14];
+ int port_index;
+ int irq;
+
+ irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
+ if (irq <= 0)
+ return 1;
+
+ for (port_index = 2; port_index <= DWC3_MAX_PORTS; port_index++) {
+ sprintf(irq_name, "dp_hs_phy_%d", port_index);
+
+ irq = platform_get_irq_byname_optional(pdev, irq_name);
+ if (irq <= 0)
+ return port_index - 1;
+ }
+
+ return DWC3_MAX_PORTS;
+}
+
+static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+{
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ bool is_multiport;
+ int ret;
+ int i;
+
+ qcom->num_ports = dwc3_qcom_find_num_ports(pdev);
+ is_multiport = (qcom->num_ports > 1);
+
+ for (i = 0; i < qcom->num_ports; i++) {
+ ret = dwc3_qcom_setup_port_irq(pdev, i, is_multiport);
if (ret)
return ret;
- qcom->ss_phy_irq = irq;
}
return 0;
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v17 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver
2024-03-26 10:28 ` [PATCH v17 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver Krishna Kurapati
@ 2024-03-26 10:44 ` Johan Hovold
0 siblings, 0 replies; 11+ messages in thread
From: Johan Hovold @ 2024-03-26 10:44 UTC (permalink / raw)
To: Krishna Kurapati
Cc: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, devicetree, linux-arm-msm, linux-usb, linux-kernel,
quic_ppratap, quic_jackp, Johan Hovold
On Tue, Mar 26, 2024 at 03:58:07PM +0530, Krishna Kurapati wrote:
> On multiport supported controllers, each port has its own DP/DM
> and SS (if super speed capable) interrupts. As per the bindings,
> their interrupt names differ from standard ones having "_x" added
> as suffix (x indicates port number). Identify from the interrupt
> names whether the controller is a multiport controller or not.
> Refactor dwc3_qcom_setup_irq() call to parse multiport interrupts
> along with non-multiport ones accordingly..
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 137 ++++++++++++++++++++++++++---------
> 1 file changed, 103 insertions(+), 34 deletions(-)
> -static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> +static int dwc3_qcom_setup_port_irq(struct platform_device *pdev, int port_num, bool is_multiport)
Here you use "port_num", when it's really a (zero-based) port index.
Please change to "port_index".
> {
> struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> + const char *irq_name;
> int irq;
> int ret;
>
> - irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
> + if (is_multiport)
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_num + 1);
> + else
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_irq");
> + if (!irq_name)
> + return -ENOMEM;
> +static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
> +{
> + char irq_name[14];
> + int port_index;
> + int irq;
> +
> + irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
> + if (irq <= 0)
> + return 1;
> +
> + for (port_index = 2; port_index <= DWC3_MAX_PORTS; port_index++) {
And here you use port_index, when it's really a one-based port number.
I explicitly used "port" when we discussed the update here for this
reason ("port_num" works too).
Please fix this last thing in a v18 and we're good to go.
> + sprintf(irq_name, "dp_hs_phy_%d", port_index);
> +
> + irq = platform_get_irq_byname_optional(pdev, irq_name);
> + if (irq <= 0)
> + return port_index - 1;
> + }
> +
> + return DWC3_MAX_PORTS;
> +}
Johan
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v17 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
` (6 preceding siblings ...)
2024-03-26 10:28 ` [PATCH v17 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
2024-03-26 10:28 ` [PATCH v17 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper Krishna Kurapati
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
DWC3 Qcom wrapper currently supports only wakeup configuration
for single port controllers. Read speed of each port connected
to the controller and enable wakeup for each of them accordingly.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 71 +++++++++++++++++++++---------------
1 file changed, 41 insertions(+), 30 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 38452104337c..f8d3c9ecf461 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -57,6 +57,7 @@ struct dwc3_qcom_port {
int dp_hs_phy_irq;
int dm_hs_phy_irq;
int ss_phy_irq;
+ enum usb_device_speed usb2_speed;
};
struct dwc3_qcom {
@@ -68,7 +69,6 @@ struct dwc3_qcom {
struct reset_control *resets;
struct dwc3_qcom_port ports[DWC3_MAX_PORTS];
u8 num_ports;
- enum usb_device_speed usb2_speed;
struct extcon_dev *edev;
struct extcon_dev *host_edev;
@@ -307,7 +307,7 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
return dwc->xhci;
}
-static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
+static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index)
{
struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
struct usb_device *udev;
@@ -318,14 +318,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
*/
hcd = platform_get_drvdata(dwc->xhci);
- /*
- * It is possible to query the speed of all children of
- * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
- * currently supports only 1 port per controller. So
- * this is sufficient.
- */
#ifdef CONFIG_USB
- udev = usb_hub_find_child(hcd->self.root_hub, 1);
+ udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
#else
udev = NULL;
#endif
@@ -356,26 +350,26 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
disable_irq_nosync(irq);
}
-static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
{
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq);
- if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
- } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
- (qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
+ if (port->usb2_speed == USB_SPEED_LOW) {
+ dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
+ } else if ((port->usb2_speed == USB_SPEED_HIGH) ||
+ (port->usb2_speed == USB_SPEED_FULL)) {
+ dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
} else {
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
}
- dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
+ dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq);
}
-static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
{
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0);
/*
* Configure DP/DM line interrupts based on the USB2 device attached to
@@ -386,21 +380,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
* DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
*/
- if (qcom->usb2_speed == USB_SPEED_LOW) {
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ if (port->usb2_speed == USB_SPEED_LOW) {
+ dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
IRQ_TYPE_EDGE_FALLING);
- } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
- (qcom->usb2_speed == USB_SPEED_FULL)) {
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ } else if ((port->usb2_speed == USB_SPEED_HIGH) ||
+ (port->usb2_speed == USB_SPEED_FULL)) {
+ dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
IRQ_TYPE_EDGE_FALLING);
} else {
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
+ dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
IRQ_TYPE_EDGE_RISING);
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
+ dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
IRQ_TYPE_EDGE_RISING);
}
- dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
+ dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0);
+}
+
+static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+{
+ int i;
+
+ for (i = 0; i < qcom->num_ports; i++)
+ dwc3_qcom_disable_port_interrupts(&qcom->ports[i]);
+}
+
+static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+{
+ int i;
+
+ for (i = 0; i < qcom->num_ports; i++)
+ dwc3_qcom_enable_port_interrupts(&qcom->ports[i]);
}
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -427,7 +437,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
* freezable workqueue.
*/
if (dwc3_qcom_is_host(qcom) && wakeup) {
- qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
+ for (i = 0; i < qcom->num_ports; i++)
+ qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i);
dwc3_qcom_enable_interrupts(qcom);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v17 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
2024-03-26 10:28 [PATCH v17 0/9] Add multiport support for DWC3 controllers Krishna Kurapati
` (7 preceding siblings ...)
2024-03-26 10:28 ` [PATCH v17 8/9] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport Krishna Kurapati
@ 2024-03-26 10:28 ` Krishna Kurapati
8 siblings, 0 replies; 11+ messages in thread
From: Krishna Kurapati @ 2024-03-26 10:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Bjorn Andersson, Wesley Cheng,
Konrad Dybcio, Greg Kroah-Hartman, Conor Dooley, Thinh Nguyen,
Felipe Balbi, Johan Hovold
Cc: devicetree, linux-arm-msm, linux-usb, linux-kernel, quic_ppratap,
quic_jackp, Krishna Kurapati, Johan Hovold
Power event IRQ is used for wakeup in cases:
a) where the controller is super speed capable and missing an
ss_phy interrupt.
b) where the GIC is not capable of detecting DP/DM hs phy irq's.
Power event IRQ stat register indicates whether high speed phy
entered and exited L2 successfully during suspend and resume.
Indicate the same for all ports of multiport.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index f8d3c9ecf461..2d06f83a4f4b 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -52,6 +52,13 @@
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
+static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {
+ 0x58,
+ 0x1dc,
+ 0x228,
+ 0x238,
+};
+
struct dwc3_qcom_port {
int qusb2_phy_irq;
int dp_hs_phy_irq;
@@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
if (qcom->is_suspended)
return 0;
- val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
- if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
- dev_err(qcom->dev, "HS-PHY not in L2\n");
+ for (i = 0; i < qcom->num_ports; i++) {
+ val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
+ if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+ dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
+ }
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
@@ -472,8 +481,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
/* Clear existing events from PHY related to L2 in/out */
- dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
- PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ for (i = 0; i < qcom->num_ports; i++) {
+ dwc3_qcom_setbits(qcom->qscratch_base,
+ pwr_evnt_irq_stat_reg[i],
+ PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+ }
qcom->is_suspended = false;
--
2.34.1
^ permalink raw reply related [flat|nested] 11+ messages in thread